EN 10207:2017

Steels for simple pressure vessels - Technical delivery requirements for plates, strips and bars

This European Standard specifies the technical delivery requirements for plates, strips and bars made of steel in accordance with the specifications for pressurized parts in simple pressure vessels as defined in the Directive 2014/29/EU (see Annex A) and standardized in EN 286-1 to EN 286-3.
NOTE   Once this European Standard is published in the EU Official Journal (OJEU) under Directive 2014/29/EU, presumption of conformity to the Essential Safety Requirements (ESRs) of Directive 2014/29/EU is limited to technical data of materials in this European Standard and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements of this specific item of equipment to verify that the ESRs of Directive 2014/29/EU are satisfied, needs to be done.

Stähle für einfache Druckbehälter - Technische Lieferbedingungen für Blech, Band und Stabstahl

Dieses Dokument legt die technischen Lieferbedingungen für Flacherzeugnisse und Stäbe aus Stahl fest, die nach Europäischer Richtlinie 2014/29/EU für drucktragende Teile einfacher Druckbehälter vorgeschrieben (siehe Anhang A) und in EN 286-1 bis -3 genormt sind.
ANMERKUNG   Nach Veröffentlichung dieser Europäischen Norm im EU Amtsblatt (OJEU) unter der Richtlinie 2014/29/EU ist die Annahme ihrer Konformität mit den grundlegenden Anforderungen (ESR) der Richtlinie 2014/29/EU auf die technischen Daten von Werkstoffen in dieser Europäischen Norm beschränkt, und es darf nicht angenommen werden, dass damit die Eignung des Werkstoffs für ein bestimmtes Ausrüstungsteil festgestellt ist. Folglich müssen die in dieser Werkstoffnorm angegebenen technischen Parameter im Hinblick auf die konstruktiven Anforderungen dieses bestimmten Ausrüstungsteils ermittelt werden, um damit zu verifizieren, dass den ESR der Richtlinie 2014/29/EU entsprochen wird.

Aciers pour appareils à pression simples - Conditions techniques de livraison des tôles, bandes et barres

Cette norme européenne spécifie les conditions techniques de livraison des tôles, des bandes et des barres en acier qui satisfont aux spécifications relatives aux parties soumises à pression des récipients à pression simples tels que définis dans la Directive 2014/29/UE (voir Annexe A) et normalisés dans les EN 286-1 à EN 286-3.
NOTE   Dès lors que la présente Norme européenne est publiée dans le Journal Officiel de l’Union européenne (JOUE) en lien avec la Directive 2014/29/UE, la présomption de conformité avec les exigences essentielles de sécurité de la Directive 2014/29/UE se limite aux données techniques des matériaux spécifiées dans la présente Norme européenne et ne suppose pas l’adéquation des matériaux avec un appareil en particulier. Par conséquent, il doit être procédé à l’évaluation des données techniques spécifiées dans la présente norme de matériaux par rapport aux exigences concernant la conception de cet équipement spécifique, afin de vérifier que les exigences essentielles de sécurité de la Directive 2014/29/UE soient satisfaites.

Jekla za enostavne tlačne posode - Tehnični dobavni pogoji za pločevine, trakove in palice

V tem dokumentu so določeni tehnični dobavni pogoji za ploščate proizvode in palice iz jekla v skladu s specifikacijami za dele pod tlakom v preprostih tlačnih posodah, kot so opredeljeni v Direktivi 2014/29/EU (glej dodatek A) in standardizirani v delih standarda od EN 286-1 do EN 286-3.
OPOMBA: Ko bo ta evropski standard objavljen v Uradnem listu Evropske unije (OJEU) v okviru Direktive 2014/29/EU, bodo zagotovila o skladnosti z osnovnimi varnostnimi zahtevami (ESR) Direktive 2014/29/EU omejena na tehnične podatke o materialih, navedene v tem evropskem standardu, standard pa ne bo zagotavljal ustreznosti materiala za določen element opreme. Zato bo potrebno oceniti tehnične podatke, podane v tem standardu za materiale, glede na zahteve zasnove določenega elementa opreme, da se zagotovi, da so upoštevane osnovne varnostne zahteve Direktive 2014/29/EU.

General Information

• Status: Published
• Publication Date: 07-Nov-2017
• Withdrawal Date: 30-May-2018
• ICS: 77.140.30 - Steels for pressure purposes
• Technical Committee: ECISS/TC 107 - Steels for pressure purposes
• Drafting Committee: ECISS/TC 107 - Steels for pressure purposes
• Current Stage: 9060 - Closure of 2 Year Review Enquiry - Review Enquiry
• Start Date: 04-Jun-2023
• Completion Date: 04-Jun-2023
• Directive: 2014/29/EU - Directive 2014/29/EU of The European Parliament and of the Council of 26 February 2016 on the harmonisation of the laws of the Member States relating to the making available on the market of simple pressure vessels
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Mandate: M/602 - COMMISSION IMPLEMENTING DECISION on a standardisation request to the European Committee for Standardization as regards simple pressure vessels in support of Directive 2014/29/EU of the European Parliament and of the Council
• Ref Project: SIST EN 10207:2018 - Steels for simple pressure vessels - Technical delivery requirements for plates, strips and bars

Relations

• Replaces: EN 10207:2005 - Steels for simple pressure vessels - Technical delivery requirements for plates, strips and bars
• Effective Date: 13-Nov-2017

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Stähle für einfache Druckbehälter - Technische Lieferbedingungen für Blech, Band und StabstahlAciers pour appareils à pression simples - Conditions techniques de livraison des tôles, bandes et barresSteels for simple pressure vessels - Technical delivery requirements for plates, strips and bars77.140.50SROL]GHONLFlat steel products and semi-products77.140.30Jekla za uporabo pod tlakomSteels for pressure purposes23.020.32Pressure vesselsICS:Ta slovenski standard je istoveten z:EN 10207:2017SIST EN 10207:2018en01-februar-2018SIST EN 10207:2018SLOVENSKI
STANDARDSIST EN 10207:20051DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 10207
November
t r s y ICS
y yä s v rä u r Supersedes EN
s r t r yã t r r wEnglish Version
Steels for simple pressure vessels æ Technical delivery requirements for platesá strips and bars Aciers pour appareils à pression simples æ Conditions techniques de livraison des tôlesá bandes et barres
Stähle für einfache Druckbehälter æ Technische Lieferbedingungen für Blechá Band und Stabstahl This European Standard was approved by CEN on
t z August
t r s yä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
t r s y CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s r t r yã t r s y ESIST EN 10207:2018

European foreword . 3 1 Scope . 4 2 Normative references . 4 3 Terms and definitions . 5 4 Classification and designation . 5 4.1 Classification . 5 4.2 Designation. 5 5 Information to be supplied by the purchaser . 6 5.1 Mandatory information . 6 5.2 Options . 6 6 Manufacturing process . 6 6.1 Steelmaking . 6 6.2 Delivery condition . 6 7 Requirements . 7 7.1 General . 7 7.2 Chemical composition . 7 7.3 Mechanical properties . 8 7.4 Surface condition . 10 7.5 Internal soundness . 10 7.6 Dimensions and tolerances on dimensions . 10 7.7 Calculation of mass . 12 8 Inspection . 12 8.1 Types of inspection and inspection documents . 12 8.2 Tests to be carried out for specific inspection . 12 9 Sampling and preparation of samples and test pieces . 13 9.1 Test units for specific inspection . 13 9.2 Preparation of samples and test pieces . 13 9.3 Preparation of test pieces . 15 10 Test methods . 16 10.1 Chemical analysis . 16 10.2 Tensile test at room temperature . 16 10.3 Impact test . 16 10.4 Tensile test at elevated temperature . 17 10.5 Visual examination . 17 10.6 Ultrasonic test . 17 10.7 Retests, sorting and reprocessing . 17 11 Marking . 17 Annex A (informative)
Definition of “simple pressure vessel” . 18 Annex B (informative)
Changes to the previous version EN 10207:2005 . 19 Annex ZA (informative)
Relationship between this document and the Essential Requirements of the Directive for Simple Pressure Vessels 2014/29/EU aimed to be covered. 20 Bibliography . 21 SIST EN 10207:2018
...