EN 14716:2004

Stretched ceilings - Requirements and test methods

This document specifies the characteristics, specifications and test methods for stretched ceilings made up of
single or multi-layer sheets, coated fabrics or fabrics made up of coated or monofilament yarn with a fastening
system.
It also specifies the method of conformity assessment for stretched ceilings.

Spanndecken - Anforderungen und Prüfverfahren

Diese Europäische Norm legt die Kenndaten, Anforderungen und Prüfverfahren für Spanndecken fest, die aus einer bzw. mehreren Schichten Folie, beschichteten Gewebe bzw. Gewebe aus beschichteten Fasern (Garnen) oder beschichteten Einzelfäden (Monofilament) und einem Befestigungssystem zusammengesetzt sind.
Des Weiteren werden die Verfahren zur Konformitätsbewertung der Spanndecken festgelegt.

Plafonds tendus - Exigences et méthodes d'essai

Napeti stropovi – Zahteve in preskusne metode

General Information

• Status: Published
• Publication Date: 07-Dec-2004
• ICS: 91.060.30 - Ceilings. Floors. Stairs
• Technical Committee: CEN/TC 357 - Project Committee - Stretched ceilings
• Drafting Committee: CEN/TC 357 - Project Committee - Stretched ceilings
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Start Date: 10-Jul-2009
• Completion Date: 10-Jul-2009
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/121 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on internal and external wall and ceiling finishes
• Ref Project: SIST EN 14716:2005 - Stretched ceilings - Requirements and test methods

Relations

• Revised: FprEN 14716 - Stretched ceilings - Requirements and test methods
• Effective Date: 19-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Stretched ceilings - Requirements and test methodsNapeti stropovi – Zahteve in preskusne metodePlafonds tendus - Exigences et méthodes d'essaiSpanndecken - Anforderungen und PrüfverfahrenTa slovenski standard je istoveten z:EN 14716:2004SIST EN 14716:2005en91.060.30ICS:SLOVENSKI
STANDARDSIST EN 14716:200501-februar-2005

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14716December 2004ICS 91.060.30English versionStretched ceilings - Requirements and test methodsPlafonds tendus - Exigences et méthodes d'essaiSpanndecken - Anforderungen und PrüfverfahrenThis European Standard was approved by CEN on 22 October 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14716:2004: E

SBI test.14 Annex B (normative)
Determination of the mass per unit area and thickness of the sheets.18 B.1 Determination of the mass per unit area.18 B.1.1 Apparatus.18 B.1.2 Test pieces.18 B.1.3 Conditioning.18 B.1.4 Procedure.18 B.1.5 Calculation and expression of results.18 B.2 Determination of the thickness.19 B.2.1 Apparatus.19 B.2.2 Conditioning.19 B.2.3 Procedure.19 B.2.4 Calculation and expression of results.19 B.3 Test report.19 Annex C (normative)
Determination of dimensional stability after exposure to moisture.20 C.1 Scope.20 C.2 Principle.20 C.3 Apparatus and reagents.20 C.3.1 Enclosure (see Figure C.1).20 C.3.2 Test solution.20 C.4 Preparation of the test pieces.21 C.4.1 General.21 C.4.2 Stretched ceiling.21 C.4.3 Related materials.21

Determination of dimensional changes after exposure to heat (kaolin bed method).36 E.1 Principle.36 E.2 Apparatus.36 E.3 Test pieces.36 E.3.1 Shape and dimensions.36 E.3.2 Taking of test pieces.36 E.4 Procedure.37 E.4.1 Test temperature.37 E.4.2 Test.37 E.5 Expression of results.37 E.6 Test report.38 Annex F (normative)
Method of assessing the weldability of sheets assembled by the high frequency welding process.39 F.1 Scope.39 F.2 Definitions.39 F.2.1 General.39 F.3 Principles used for assessing HF weldability.40 F.3.1 Methodology.40 F.3.2 HF welding criteria.
...