EN ISO 17078-2:2007

Petroleum and natural gas industries - Drilling and production equipment - Part 2: Flow-control devices for side-pocket mandrels (ISO 17078-2:2007)

ISO 17078-2:2007 provides requirements for subsurface flow-control devices used in side-pocket mandrels (hereafter called flow-control devices) intended for use in the worldwide petroleum and natural gas industry. This includes requirements for specifying, selecting, designing, manufacturing, quality-control, testing and preparation for shipping of flow-control devices. Additionally, it includes information regarding performance testing and calibration procedures.
The installation and retrieval of flow-control devices is outside the scope of ISO 17078-2:2007. Additionally, ISO 17078-2:2007 is not applicable to flow-control devices used in centre-set mandrels or with tubing-retrievable applications.
ISO 17078-2:2007 does not include requirements for side-pocket mandrels, running, pulling, and kick-over tools, and latches that might or might not be covered in other ISO specifications. Reconditioning of used flow-control devices is outside of the scope of ISO 17078-2:2007.

Erdöl- und Erdgasindustrie - Bohr- und Produktionsausrüstungen - Teil 2: Durchfluss-Regelvorrichtungen für Gaslift-Ventile (ISO 17078-2:2007)

Industries du pétrole et du gaz naturel - Équipement de forage et de production - Partie 2: Dispositifs de régulation de la vitesse d'écoulement pour raccords à poche latérale (ISO 17078-2:2007)

L'ISO 17078-2:2007 fournit des exigences applicables aux dispositifs de régulation de la vitesse de l'écoulement au-dessous de la surface, utilisés dans des raccords à poche latérale (appelés ci-après dispositifs de régulation de la vitesse de l'écoulement) prévus pour être utilisés dans les industries du pétrole et du gaz naturel dans le monde entier. Cela inclut des exigences destinées à spécifier, sélectionner, concevoir, fabriquer, effectuer un contrôle de la qualité, effectuer des essais et une préparation avant l'expédition de dispositifs de régulation de la vitesse de l'écoulement. En outre, elle comprend des informations concernant les essais de performances et les méthodes d'étalonnage.
L'installation et la récupération de dispositifs de régulation de la vitesse de l'écoulement ne s'inscrivent pas dans le domaine d'application de l'ISO 17078-2:2007. En outre, l'ISO 17078-2:2007 n'est pas applicable à des dispositifs de régulation de la vitesse de l'écoulement utilisés dans des raccords à l'installation centrale ou à des applications à tubage récupérables.
L'ISO 17078-2:2007 n'inclut pas d'exigences pour les raccords à poche latérale, pour les outils de déplacement, de traction et de renversement et les verrous qui pourraient ou pourraient ne pas être couverts dans d'autres spécifications de l'ISO. Le reconditionnement des dispositifs de régulation de la vitesse de l'écoulement n'appartient pas au domaine d'application de l'ISO 17078-2:2007.

Industrija za predelavo nafte in zemeljskega plina - Vrtalna in proizvodna oprema - 2. del: Naprave za regulacijo pretoka za vpenjalne osi s stranskimi žepi (ISO 17078-2:2007)

General Information

• Status: Published
• Publication Date: 14-Dec-2007
• Withdrawal Date: 29-Jun-2008
• ICS: 75.180.10 - Exploratory, drilling and extraction equipment
• Technical Committee: CEN/TC 12 - Materials, equipment and offshore structures for petroleum and natural gas industries
• Drafting Committee: CEN/TC 12 - Materials, equipment and offshore structures for petroleum and natural gas industries
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 15-Dec-2007
• Completion Date: 15-Dec-2007
• Ref Project: SIST EN ISO 17078-2:2008 - Petroleum and natural gas industries - Drilling and production equipment - Part 2: Flow-control devices for side-pocket mandrels (ISO 17078-2:2007)

Relations

• Corrected By: EN ISO 17078-2:2007/AC:2009 - Petroleum and natural gas industries - Drilling and production equipment - Part 2: Flow-control devices for side-pocket mandrels (ISO 17078-2:2007/Cor 1:2009)
• Effective Date: 30-May-2009

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 17078-2:2008
01-marec-2008
Industrija za predelavo nafte in zemeljskega plina - Vrtalna in proizvodna oprema -
2. del: Naprave za regulacijo pretoka za vpenjalne osi s stranskimi žepi (ISO 17078-
2:2007)
Petroleum and natural gas industries - Drilling and production equipment - Part 2: Flow-
control devices for side-pocket mandrels (ISO 17078-2:2007)
Erdöl- und Erdgasindustrie - Bohr- und Produktionsausrüstungen - Teil 2: Durchfluss-
Regelvorrichtungen für Gaslift-Ventile (ISO 17078-2:2007)
Industries du pétrole et du gaz naturel - Équipement de forage et de production - Partie
2: Dispositifs de régulation de la vitesse d'écoulement pour raccords à poche latérale
(ISO 17078-2:2007)
Ta slovenski standard je istoveten z: EN ISO 17078-2:2007
ICS:
75.180.10 Oprema za raziskovanje in Exploratory and extraction
odkopavanje equipment
SIST EN ISO 17078-2:2008 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 17078-2:2008

---------------------- Page: 2 ----------------------

SIST EN ISO 17078-2:2008
EUROPEAN STANDARD
EN ISO 17078-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2007
ICS 75.180.10

English Version
Petroleum and natural gas industries - Drilling and production
equipment - Part 2: Flow-control devices for side-pocket
mandrels (ISO 17078-2:2007)
Industries du pétrole et du gaz naturel - Équipement de Erdöl- und Erdgasindustrie - Bohr- und
forage et de production - Partie 2: Dispositifs de régulation Produktionsausrüstungen - Teil 2: Durchfluss-
de la vitesse d'écoulement pour raccords à poche latérale Regelvorrichtungen für Gaslift-Ventile (ISO 17078-2:2007)
(ISO 17078-2:2007)
This European Standard was approved by CEN on 14 December 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17078-2:2007: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 17078-2:2008
EN ISO 17078-2:2007 (E)
Contents Page
Foreword.3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 17078-2:2008
EN ISO 17078-2:2007 (E)
Foreword
This document (EN ISO 17078-2:2007) has been prepared by Technical Committee ISO/TC 67 "Materials,
equipment and offshore structures for petroleum and natural gas industries" in collaboration with Technical
Committee CEN/TC 12 "Materials, equipment and offshore structures for petroleum, petrochemical and
natural gas industries", the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2008, and conflicting national standards shall be withdrawn at
the latest by June 2008.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 17078-2:2007 has been approved by CEN as a EN ISO 17078-2:2007 without any
modification.

3

--
...