EN ISO 9606-2:2004

Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004)

ISO 9606-2:2004 specifies the requirements for qualification of welders for fusion welding of aluminium and aluminium alloys.
ISO 9606-2:2004 provides a set of technical rules for systematic qualification of welders, which are independent of product type, location and examiner/examining body.
The welding processes referred to in ISO 9606-2:2004 include those fusion welding processes which are designated as manual or partly mechanized welding. It does not qualify fully mechanized and automated welding processes.

Prüfung von Schweißern - Schmelzschweißen - Teil 2: Aluminium und Aluminiumlegierungen (ISO 9606-2:2004)

Epreuve de qualification des soudeurs - Soudage par fusion - Partie 2 : Aluminium et alliages d'aluminium (ISO 9606-2:2004)

L'ISO 9606-2:2004 définit les exigences relatives à la qualification des soudeurs pour le soudage par fusion de l'aluminium et des alliages d'aluminium.
L'ISO 9606-2:2004 fournit un ensemble de règles techniques pour l'épreuve de qualification systématique des soudeurs qui sont indépendantes du type de produit, du lieu et de l'examinateur ou de l'organisme d'examen.
Lors de la qualification des soudeurs, l'accent est porté sur l'aptitude du soudeur à guider manuellement la torche de soudage afin de produire une soudure de qualité acceptable.
Les procédés de soudage concernés par l'ISO 9606-2:2004 sont les procédés de soudage par fusion désignés en tant que, manuels ou semi-automatiques. Elle ne traite pas des procédés de soudage totalement mécanisés et automatisés.

Preskušanje varilcev - Talilno varjenje - 2. del: Aluminij in aluminijeve zlitine (ISO 9606-2:2004)

General Information

• Status: Published
• Publication Date: 14-Dec-2004
• Withdrawal Date: 29-Jun-2005
• ICS: 25.160.10 - Welding processes
• Technical Committee: CEN/TC 121 - Welding
• Drafting Committee: CEN/TC 121/SC 4 - Quality management in the field of welding
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Start Date: 08-May-2009
• Completion Date: 08-May-2009
• Directive: 2014/68/EU - Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Mandate: M/111 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on circulation fixtures
• Ref Project: SIST EN ISO 9606-2:2005 - Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004)

Relations

• Replaces: EN 287-2:1992 - Approval testing of welders - Fusion welding - Part 2: Aluminium and aluminium alloys
• Effective Date: 22-Dec-2008
• Replaces: EN 287-2:1992/A1:1997 - Approval testing of welders - Fusion welding - Part 2: Aluminium and aluminium alloys
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 9606-2:2005
01-marec-2005
1DGRPHãþD
SIST EN 287-2:1996
SIST EN 287-2:1996/A1:2001
Preskušanje varilcev - Talilno varjenje - 2. del: Aluminij in aluminijeve zlitine (ISO
9606-2:2004)
Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys
(ISO 9606-2:2004)
Prüfung von Schweißern - Schmelzschweißen - Teil 2: Aluminium und
Aluminiumlegierungen (ISO 9606-2:2004)
Epreuve de qualification des soudeurs - Soudage par fusion - Partie 2 : Aluminium et
alliages d'aluminium (ISO 9606-2:2004)
Ta slovenski standard je istoveten z: EN ISO 9606-2:2004
ICS:
03.100.30 Vodenje ljudi Management of human
resources
25.160.10 Varilni postopki in varjenje Welding processes
77.120.10 Aluminij in aluminijeve zlitine Aluminium and aluminium
alloys
SIST EN ISO 9606-2:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN ISO 9606-2

NORME EUROPÉENNE

EUROPÄISCHE NORM
December 2004
ICS 25.160.10 Supersedes EN 287-2:1992
English version
Qualification test of welders - Fusion welding - Part 2: Aluminium
and aluminium alloys (ISO 9606-2:2004)
Epreuve de qualification des soudeurs - Soudage par Prüfung von Schweißern - Schmelzschweißen - Teil 2:
fusion - Partie 2 : Aluminium et alliages d'aluminium (ISO Aluminium und Aluminiumlegierungen (ISO 9606-2:2004)
9606-2:2004)
This European Standard was approved by CEN on 23 September 2004.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.

CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.




EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9606-2:2004: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN ISO 9606-2:2004 (E)
Contents
page
Foreword.4
Introduction .5
1 Scope .6
2 Normative references .6
3 Terms and definitions .7
4 Symbols and abbreviated terms .7
4.1 General.7
4.2 Reference numbers of welding processes .7
4.3 Abbreviations.8
5 Essential variables and range of qualification .8
5.1 General.8
5.2 Welding processes .9
5.3 Product type .
...