EN 28662-5:1994/A2:2001

Hand-held portable power tools - Measurement of vibrations at the handle - Part 5: Pavement breakers and hammers for construction work (ISO 8662-5:1992/AM 1:1999)

Migrated from Progress Sheet (TC Comment) (2000-07-10): UAP of 4 months (TC Res 4/1999) (CC/000111)

Handgehaltene motorbetriebene Maschinen - Messung mechanischer Schwingungen am Handgriff - Teil 5: Aufbruchhämmer und Spatenhämmer (ISO 8662-1:1992/AM 1:1999)

Machines à moteur portatives - Mesurage des vibrations au niveau des poignées - Partie 5: Brise-béton, marteaux de démolition et marteaux piqueurs (ISO 8662-5:1992/AM 1:1999)

Hand-held portable power tools - Measurement of vibrations at the handle - Part 5: Pavement breakers and hammers for construction work (ISO 8662-5:1992/AM 1:1999)

General Information

• Status: Withdrawn
• Publication Date: 09-Oct-2001
• Withdrawal Date: 14-Apr-2011
• ICS: 13.160 - Vibration and shock with respect to human beings
• ICS: 25.140.01 - Hand-held tools in general
• Technical Committee: CEN/TC 231 - Mechanical vibration and shock
• Drafting Committee: CEN/TC 231 - Mechanical vibration and shock
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 15-Apr-2011
• Completion Date: 15-Apr-2011
• Directive: 98/37/EC - Machinery
• Mandate: M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
• Ref Project: SIST EN 28662-5:2000/A2:2004 - Hand-held portable power tools - Measurement of vibrations at the handle - Part 5: Pavement breakers and hammers for construction work (ISO 8662-5:1992/AM 1:1999)

Relations

• Replaced By: EN ISO 28927-10:2011 - Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 10: Percussive drills, hammers and breakers (ISO 28927-10:2011)
• Effective Date: 28-May-2011
• Amends: EN 28662-5:1994 - Hand-held portable power tools - Measurement of vibrations at the handle - Part 5: Pavement breakers and hammers for construction work (ISO 8662-5:1992)
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 28662-5:2000/A2:2004
01-januar-2004
Hand-held portable power tools - Measurement of vibrations at the handle - Part 5:
Pavement breakers and hammers for construction work (ISO 8662-5:1992/AM
1:1999)
Hand-held portable power tools - Measurement of vibrations at the handle - Part 5:
Pavement breakers and hammers for construction work (ISO 8662-5:1992/AM 1:1999)
Handgehaltene motorbetriebene Maschinen - Messung mechanischer Schwingungen am
Handgriff - Teil 5: Aufbruchhämmer und Spatenhämmer (ISO 8662-1:1992/AM 1:1999)
Machines a moteur portatives - Mesurage des vibrations au niveau des poignées - Partie
5: Brise-béton, marteaux de démolition et marteaux piqueurs (ISO 8662-5:1992/AM
1:1999)
Ta slovenski standard je istoveten z: EN 28662-5:1994/A2:2001
ICS:
13.160 Vpliv vibracij in udarcev na Vibration and shock with
ljudi respect to human beings
25.140.01 5RþQDRURGMDQDVSORãQR Hand-held tools in general
SIST EN 28662-5:2000/A2:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 28662-5:2000/A2:2004

---------------------- Page: 2 ----------------------

SIST EN 28662-5:2000/A2:2004
EUROPEAN STANDARD
EN 28662-5:1994/A2
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2001
ICS 13.160; 25.140.01
English version
Hand-held portable power tools - Measurement of vibrations at
the handle - Part 5: Pavement breakers and hammers for
construction work (ISO 8662-5:1992/AM 1:1999)
Machines à moteur portatives - Mesurage des vibrations au Handgehaltene motorbetriebene Maschinen - Messung
niveau des poignées - Partie 5: Brise-béton, marteaux de mechanischer Schwingungen am Handgriff - Teil 5:
démolition et marteaux piqueurs (ISO 8662-5:1992/AM Aufbruchhämmer und Spatenhämmer (ISO 8662-
1:1999) 5:1992/AM 1:1999)
This amendment A2 modifies the European Standard EN 28662-5:1994; it was approved by CEN on 11 August 2001.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 28662-5:1994/A2:2001 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 28662-5:2000/A2:2004
EN 28662-5:1994/A2:2001 (E)
Foreword
The text of this Amendment EN 28662-5:1994/A2:2001 to the EN 28662-5:1994 from Technical Committee
ISO/TC 118 "Compressors, pneumatic tools and pneumatic machines" of the International Organization for
standardization (ISO) has been taken over as an Amendment to the European Standard by Technical Committee
CEN/TC 231 "Mechanical vibration and shock", the secretariat of which is held by DIN.
This Amendment to the European Standard EN 28662-5:1994 shall be given the status of a national standard,
either by publication of an identical text or by endorsement, at the latest by April 2002, and conflicting national
standards shall be withdrawn at the latest by April 2002.
This Amendment to the European Standard EN 28662-5:1994 has been prepared under a mandate given to CEN
by the European Commission and the European Free Trade Association, and supports essential requirements of
EU Directive(s).
For relationship with EU Directive(s), see informative annex ZA, which is an integral part of this standard.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,
France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden,
Switzerland and the United Kingdom.
Endorsement notice
The text of the Amendment to the International Standard ISO 8662-5:1992/ Amendment 1:1999 has been
approved by CEN as an Amendment to the European Standard without any modification.
2

---------------------- Page: 4 ----------------------

SIST EN 28662-5:2000/A2:2004
EN 28662-5:1994/A2:2001 (E)
Annex
...