EN ISO 4035:2012

Hexagon thin nuts chamfered (style 0) - Product grades A and B (ISO 4035:2012)

ISO 4035:2012 specifies the characteristics of chamfered hexagon thin nuts (style 0), with threads from M1,6 up to and including M64, with product grade A for threads of diameter less than or equal to M16 and product grade B for threads of diameter greater than M16.

Niedrige Sechskantmuttern mit Fase (Typ 0) - Produktklassen A und B (ISO 4035:2012)

Diese Internationale Norm legt Eigenschaften von niedrigen Sechskantmuttern (Typ 0) mit Fase, mit Gewin-den von M1,6 bis M64, mit Produktklasse A für Gewinde D ≤ M16 und Produktklasse B für Gewinde D > M16, fest.
Falls in besonderen Fällen andere Festlegungen als die in dieser Internationalen Norm aufgeführten benötigt werden, können diese den entsprechenden Internationalen Normen entnommen werden, z. B. ISO 724, ISO 898-2, ISO 965-1, ISO 3506-2 und ISO 4759-1.

Écrous bas hexagonaux chanfreinés (style 0) - Grades A et B (ISO 4035:2012)

L'ISO 4035:2012 spécifie les caractéristiques des écrous bas hexagonaux chanfreinés (style 0), de diamètres de filetage M1,6 à M64 inclus, de grade A pour les filetages de diamètre inférieur ou égal à M16 et de grade B pour les filetages de diamètre supérieur à M16.

Šestrobe nizke matice s posnetjem (tip 0) - Razreda izdelave A in B (ISO 4035:2012)

Ta mednarodni standard določa značilnosti šestrobih nizkih matic s posnetjem (tip 0) z navoji od M1,6 do vključno M64, z razredom izdelave A za navoje s premerom ≤ M16 in razredom izdelave B za navoje s premerom > M16. Če so v posebnih primerih zahtevane specifikacije, ki niso navedene v tem mednarodnem standardu, jih je mogoče izbrati iz obstoječih mednarodnih standardov, na primer standardov ISO 724, ISO 898-2, ISO 965-1, ISO 3506-2 in ISO 4759-1.

General Information

• Status: Withdrawn
• Publication Date: 18-Dec-2012
• Withdrawal Date: 05-Sep-2023
• ICS: 21.060.10 - Bolts, screws, studs
• ICS: 21.060.20 - Nuts
• Technical Committee: CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
• Drafting Committee: CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
• Ref Project: SIST EN ISO 4035:2013 - Hexagon thin nuts chamfered (style 0) - Product grades A and B (ISO 4035:2012)

Relations

• Replaces: EN ISO 4035:2000 - Hexagon thin nuts (chamfered) - Product grades A and B (ISO 4035:1999)
• Effective Date: 08-Jun-2022
• Replaced By: EN ISO 4035:2023 - Fasteners - Hexagon thin nuts (style 0) (ISO 4035:2023)
• Effective Date: 28-Jan-2023
• Corrected By: EN ISO 4034:2012/AC:2013 - Hexagon regular nuts (style 1) - Product grade C - Technical Corrigendum 1 (ISO 4034:2012/Cor 1:2013)
• Effective Date: 20-Feb-2013
• Revised: prEN ISO 4035 - Hexagon thin nuts (style 0), chamfered - Product grades A and B (ISO/DIS 4035:2016)
• Effective Date: 18-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-maj-2013
1DGRPHãþD
SIST EN ISO 4035:2002
Šestrobe nizke matice s posnetjem (tip 0) - Razreda izdelave A in B (ISO
4035:2012)
Hexagon thin nuts chamfered (style 0) - Product grades A and B (ISO 4035:2012)
Niedrige Sechskantmuttern mit Fase (Typ 0) - Produktklassen A und B (ISO 4035:2012)
Écrous bas hexagonaux chanfreinés (style 0) - Grades A et B (ISO 4035:2012)
Ta slovenski standard je istoveten z: EN ISO 4035:2012
ICS:
21.060.20 Matice Nuts
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 4035
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2012
ICS 21.060.20 Supersedes EN ISO 4035:2000
English Version
Hexagon thin nuts chamfered (style 0) - Product grades A and B
(ISO 4035:2012)
Écrous bas hexagonaux chanfreinés (style 0) - Grades A et Sechskantmuttern, niedrige Form (mit Fase) -
B (ISO 4035:2012) Produktklassen A und B (ISO 4035:2012)
This European Standard was approved by CEN on 15 November 2012.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 4035:2012: E
worldwide for CEN national Members.

Contents Page
Foreword .3

Foreword
This document (EN ISO 4035:2012) has been prepared by Technical Committee ISO/TC 2 "Fasteners" in
collaboration with Technical Committee CEN/TC 185 “Fasteners”, the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2013, and conflicting national standards shall be withdrawn at
the latest by June 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 4035:2000.
According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 4035:2012 has been approved by CEN as a EN ISO 4035:2012 without any modification.
INTERNATIONAL ISO
STANDARD 4035
Fourth edition
2012-12-15
Hexagon thin nuts chamfered (style 0) —
Product grades A and B
Écrous bas hexagonaux chanfreinés (style 0) — Grades A et B
Reference number
ISO 4035:2012(E)
©
ISO 2012
ISO 4035:2012(E)
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2012 – All rights reserved

ISO 4035:2012(E)
Contents Page
Foreword .iv
Introduction . v
1 Scope . 1
2 Normative references . 1
3 Dimensions . 1
4 Requirements and reference International Standards . 4
5 Designation . 4
Bibliography . 5
ISO 4035:2012(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International
Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 4035 was prepared by Technical Committee ISO/TC 2, Fasteners, Subcommittee SC 12, Fasteners with
metric internal thread.
This fourth edition cancels and replaces the third edition (ISO 4035:1999), of which it constitutes a minor revision.
iv © ISO 2012 – All rights reserved

ISO 4035:2012(E)
Introduction
This International Standard belongs to a complete group of product standards developed by ISO on external
hexagon drive fasteners. It comprises the following:
a) hexagon head bolts (ISO 4014, ISO 4015, ISO 4016 and ISO 8765);
b) hexagon head screws (ISO 4017, ISO 4018 and ISO 8676);
c) hexagon nuts (ISO 4032, ISO 4033, ISO 4034, ISO 4035, ISO 4036, ISO 7040, ISO 7041, ISO 7042,
ISO 7719, ISO 7720, ISO 8673, ISO 8674, ISO 8675, ISO 10511, ISO 10512 and ISO 10513);
d) hexagon bolts with flange (ISO 4162, ISO 15071 and ISO 15072);
e) hexagon nuts with flange (ISO 4161, ISO 7043, ISO 7044, ISO 10663, ISO 12125, ISO 12126 and ISO 21670).
INTERNATIO
...