iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 54-2:1997

(Main)

Fire detection and fire alarm systems - Part 2: Control and indicating equipment

Fire detection and fire alarm systems - Part 2: Control and indicating equipment

This standard specifies requirements, methods of test, and performance criteria for control and indicating equipment (see item B of figure 1 of EN 54-1) for usein fire detection and fire alarm systems installed in buildings.

Brandmeldeanlagen - Teil 2: Brandmeldezentralen

Diese Europäische Norm legt Anforderungen, Prüfverfahren und Leistungsmerkmalefür Brandmelderzentralen zur Verwendung in Brandmeldesystemen, die in Gebäudenerrichtet werden, fest (siehe Bild 1, Kennbuchstabe B nach EN 54-1:1996).

Systèmes de détection et d'alarme incendie - Partie 2: Equipement de contrôle et de signalisation

Cette partie de la norme européenne EN 54 prescrit les exigences, les méthodes d'essais et les critères de performance des équipements de contrôle et de signalisation (voir dispositif B de la figure 1 de l'EN 54-1:1996) destinés à être utilisés dans les sytèmes de détection et d'alarme incendie installées dans les bâtiments.

Sistemi za odkrivanje in javljanje požara - 2. del: Oprema za kontrolo in indikacijo

General Information

Status
Published
Publication Date
21-Oct-1997
ICS
13.220.20 - Fire protection
Technical Committee
CEN/TC 72 - Fire detection and fire alarm systems
Drafting Committee
CEN/TC 72 - Fire detection and fire alarm systems
Current Stage
9092 - Decision on results of review/2YR ENQ - revise - Review Enquiry
Completion Date
22-Jul-2021
Directive
2014/90/EU - Directive 2014/90/EU of the European Parliament and of the Council of 23 July 2014 on marine equipment and repealing Council Directive 96/98/EC
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
96/98/EC - Marine equipment
Mandate
M/109 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on fire alarm/detection, fixed firefighting, fire and smoke control and explosion suppression products
Ref Project
SIST EN 54-2:1997 - Fire detection and fire alarm systems - Part 2: Control and indicating equipment

Relations

Amended By
EN 54-2:1997/A1:2006 - Fire detection and fire alarm systems - Part 2: Control and indicating equipment
Effective Date
22-Dec-2008
Corrected By
EN 54-2:1997/AC:1999 - Fire detection and fire alarm systems - Part 2: Control and indicating equipment
Effective Date
22-Dec-2008
Revised
prEN 54-2 - Fire detection and fire alarm systems - Part 2: Control and indicating equipment
Effective Date
19-Jan-2023
Revised
prEN 54-2 rev - Fire detection and fire alarm systems - Part 2: Control and indicating equipment
Effective Date
18-Jan-2023

Buy Standard

EN 54-2:1997 - za prodajo GLEJ SIST EN 54-2:1997/AC:2000 (standard + popravek)EN 54-2:1997 - za prodajo GLEJ SIST EN 54-2:1997/AC:2000 (standard + popravek)
PreviousNext
Standard
EN 54-2:1997 - za prodajo GLEJ SIST EN 54-2:1997/AC:2000 (standard + popravek)
English language
64 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 54-2:1997
01-december-1997
Sistemi za odkrivanje in javljanje požara - 2. del: Oprema za kontrolo in indikacijo
Fire detection and fire alarm systems - Part 2: Control and indicating equipment
Brandmeldeanlagen - Teil 2: Brandmeldezentralen
Systemes de détection et d'alarme incendie - Partie 2: Equipement de contrôle et de
signalisation
Ta slovenski standard je istoveten z: EN 54-2:1997
ICS:
13.220.20 3RåDUQD]DãþLWD Fire protection
13.320 Alarmni in opozorilni sistemi Alarm and warning systems
SIST EN 54-2:1997 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 54-2:1997

---------------------- Page: 2 ----------------------

SIST EN 54-2:1997

---------------------- Page: 3 ----------------------

SIST EN 54-2:1997

---------------------- Page: 4 ----------------------

SIST EN 54-2:1997

---------------------- Page: 5 ----------------------

SIST EN 54-2:1997

---------------------- Page: 6 ----------------------

SIST EN 54-2:1997

---------------------- Page: 7 ----------------------

SIST EN 54-2:1997

---------------------- Page: 8 ----------------------

SIST EN 54-2:1997

---------------------- Page: 9 ----------------------

SIST EN 54-2:1997

---------------------- Page: 10 ----------------------

SIST EN 54-2:1997

---------------------- Page: 11 ----------------------

SIST EN 54-2:1997

---------------------- Page: 12 ----------------------

SIST EN 54-2:1997

---------------------- Page: 13 ----------------------

SIST EN 54-2:1997

---------------------- Page: 14 ----------------------

SIST EN 54-2:1997

---------------------- Page: 15 ----------------------

SIST EN 54-2:1997

---------------------- Page: 16 ----------------------

SIST EN 54-2:1997

---------------------- Page: 17 ----------------------

SIST EN 54-2:1997

---------------------- Page: 18 ----------------------

SIST EN 54-2:1997

---------------------- Page: 19 ----------------------

SIST EN 54-2:1997

---------------------- Page: 20 ----------------------

SIST EN 54-2:1997

---------------------- Page: 21 ----------------------

SIST EN 54-2:1997

---------------------- Page: 22 ----------------------

SIST EN 54-2:1997

---------------------- Page: 23 ----------------------

SIST EN 54-2:1997

---------------------- Page: 24 ----------------------

SIST EN 54-2:1997

---------------------- Page: 25 ----------------------

SIST EN 54-2:1997

---------------------- Page: 26 ----------------------

SIST EN 54-2:1997

---------------------- Page: 27 ----------------------

SIST EN 54-2:1997

---------------------- Page: 28 ----------------------

SIST EN 54-2:1997

---------------------- Page: 29 ----------------------

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 54-1:2021(Main)
Fire detection and fire alarm systems - Part 1: Introduction
SIST EN 54-1:2021

This document defines the terms and definitions that are used throughout the EN 54 series of standards. It gives the principles on which each part of the series has been based and describes the functions carried out by the components of a fire detection and fire alarm system.
This document applies to fire detection and fire alarm systems for buildings and civil engineering works.
This document does not apply to smoke alarm devices which are covered by EN 14604.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 54-22:2015+A1:2020(Main)
Fire detection and fire alarm systems - Part 22: Resettable line-type heat detectors
SIST EN 54-22:2015+A1:2020

This European Standard applies to resettable line-type heat detectors consisting of a sensing element using an optical fibre, a pneumatic tube or an electrical sensor cable connected to a sensor control unit, either directly or through an interface module, intended for use in fire detection and fire alarm systems installed in and around buildings and other civil engineering works (see EN 54-1:2011).
This European Standard specifies the requirements and performance criteria, the corresponding test methods and provides for the Assessment and Verification of Constancy of Performance (AVCP) of resettable line-type heat detectors to this EN.
This European Standard also covers resettable line-type heat detectors intended for use in the local protection of plant and equipment.
Resettable line-type heat detectors with special characteristics and developed for specific risks are not covered by this EN.
This European Standard does not cover line-type heat detectors that are based on non-resettable, fixed temperature electrical cables (so called digital systems).

  • Standard
    74 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 54-13:2017+A1:2019(Main)
Fire detection and fire alarm systems - Part 13: Compatibility and connectability assessment of system components
SIST EN 54-13:2017+A1:2020

This document specifies the requirements for compatibility and connectability assessment of components of fire detection and fire alarm system or voice alarm system as a subsystem of fire detection and fire alarm system. The components comply either with the requirements of EN 54 or with a manufacturer’s specification where there is no EN 54 standard. This document only includes system requirements when these are necessary for compatibility assessment.
This document covers transmission path only between components. However ,requirements for TP between components of a function which is distributed are covered by the relevant EN 54 standard and not by this document.
This document also specifies requirements for the integrity of the fire detection and fire alarm system when connected to other systems.
This document does not specify the manner in which the system is designed, installed and used in any particular application.
This document recognizes that it is not practical to assess the compatibility or connectability of components in all possible configurations. Methods of assessment are specified to reach an acceptable degree of confidence within pre-determined operational and environmental conditions.
This document specifies requirements related to compatibility and connectability assessment methods and tests for the components belonging to FDAS or connecting FDAS. This document does not cover components or functions which are not included in a FDAS.
This document is applicable to systems where the components are interconnected by electrical wires or optical fibre or by radio frequency links or by any combination. For other interconnection technology between components , this standard may be used as a guidance.
NOTE Other European Standards are expected to cover the requirements of the other systems to which the fire detection and fire alarm system may be connected.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 54-3:2014+A1:2019(Main)
Fire detection and fire alarm systems - Part 3: Fire alarm devices - Sounders
SIST EN 54-3:2014+A1:2019

This European Standard specifies the requirements, test methods and performance criteria for fire alarm sounders, including voice sounders, in a fixed installation intended to signal an audible warning between the fire detection and fire alarm systems and the occupants of a building (see EN 54-1:2011).
This European Standard provides for the assessment and verification of constancy of performance (AVCP) of fire alarm sounders to this EN.
This European Standard is not intended to cover:
a)   loudspeaker type devices primarily intended for emitting emergency voice messages that are generated from an external audio source;
b)   supervisory sounders, for example, within the control and indicating equipment.

  • Standard
    67 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 54-14:2018(Main)
Fire detection and fire alarm systems - Part 14: Guidelines for planning, design, installation, commissioning, use and maintenance
SIST-TS CEN/TS 54-14:2018

This document provides guidelines for the application of automatic fire detection and fire alarm systems in and around buildings. The guideline covers planning, design, installation, commissioning, use and maintenance of the systems.
The guidelines cover systems intended for the protection of life and/or the protection of property. The guidelines cover systems with a control and indicating equipment and at least one manual call point or one fire detector. In the event of a fire the systems may be capable of providing signals to initiate the operation of ancillary equipment (such as fixed fire extinguishing systems) and other precautions and actions (such as machinery shutdown or remote transmission of alarms). These guidelines do not cover the ancillary services themselves or ancillary circuits to interface with them.
The guidelines do not cover systems combining fire alarm functions with other non-fire related functions.
The guidelines do not recommend whether or not an automatic fire detection and/or fire alarm system should be installed in any given premises.
These guidelines should be used by appropriately competent persons. However, guidance is also given to other persons purchasing or using a fire detection and / or fire alarm system.
Smoke alarms according to EN 14604 are not fire detection and fire alarm systems.

  • Technical specification
    90 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 54-7:2018(Main)
Fire detection and fire alarm systems - Part 7: Smoke detectors - Point smoke detectors that operate using scattered light, transmitted light or ionization
SIST EN 54-7:2018

This draft European Standard specifies requirements, test methods and performance criteria for point smoke detectors that operate using scattered light, transmitted light or ionization, intended for use in fire detection and fire alarm systems installed in and around buildings (see EN 54 1:2011).
This European standard provides for the assessment of verification of consistency of performance (AVCP) of point smoke detectors to this EN.
For other types of smoke detector, or smoke detectors working on different principles, this standard should only be used for guidance. Smoke detectors with special characteristics and developed for specific risks are not covered by this standard.
NOTE   Certain types of detector contain radioactive materials. The national requirements for radiation protection differ from country to country and they are not specified in this standard.

  • Standard
    79 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 54-5:2017+A1:2018(Main)
Fire detection and fire alarm systems - Part 5: Heat detectors - Point heat detectors
SIST EN 54-5:2017+A1:2018

This European Standard specifies the requirements, test methods and performance criteria for point heat detectors intended for use in fire detection and fire alarm systems installed in and around buildings (see EN 54-1:2011).
This European Standard provides for the assessment of verification of constancy of performance (AVCP) of point heat detectors to this EN.
For other types of heat detector, or for detectors intended for use in other environments, this standard should only be used for guidance.
Heat detectors with special characteristics and developed for specific risks are not covered by this standard.

  • Standard
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 54-31:2014+A1:2016(Main)
Fire detection and fire alarm systems - Part 31: Multi-sensor fire detectors - Point detectors using a combination of smoke, carbon monoxide and optionally heat sensors
SIST EN 54-31:2015+A1:2016

This European Standard specifies requirements, test methods and performance criteria for point-type multi-sensor fire detectors for use in fire detection and fire alarm systems installed in and around buildings (see EN 54 1:2011), incorporating in one mechanical enclosure at least one optical or ionization smoke sensor and at least one carbon monoxide (CO) sensor and optionally one or more heat sensors, utilizing the combination of the detected phenomena. This European Standard covers only modes of operation, where at least the signals of both smoke and carbon monoxide sensors are continuously evaluated.
This European Standard provides for the assessment and verification of constancy of performance (AVCP) of point detectors using a combination of smoke, carbon monoxide and optionally heat sensors to this EN.
Point detectors using a combination of smoke, carbon monoxide and optionally heat sensors, which are having special characteristics suitable for the detection of specific fire risks are not covered by this European Standard. The performance requirements for any additional functions are beyond the scope of this standard (e.g. additional features or enhanced functionality for which this European Standard does not define a test or assessment method).

  • Standard
    107 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 54-28:2016(Main)
Fire detection and fire alarm system - Part 28: Non-resettable line-type heat detectors
SIST EN 54-28:2016

This European Standard applies to non-resettable line-type heat detectors consisting of a sensing element using an electrical sensor cable which can be connected to a sensor control unit or either directly or through an interface module to a control and indicating equipment intended for use in fire detection and fire alarm systems installed in and around buildings and civil engineering works (see EN 54 1:2011).
The non-resettable sensing element has a fixed temperature alarm threshold and does not distinguish between short circuit and alarm condition.
This European Standard specifies the requirements and performance criteria, the corresponding test methods and provides for the Assessment and Verification of Constancy of Performance (AVCP) of non-resettable line-type heat detectors to this European Standard.
This European Standard also covers non-resettable line-type heat detectors intended for use in the local protection of plant and equipment.
Non-resettable line-type heat detectors with special characteristics and developed for specific risks are not covered by this standard.

  • Standard
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 54-32:2015(Main)
Fire detection and fire alarm systems - Part 32: Planning, design, installation, commissioning, use and maintenance of voice alarm systems
SIST-TS CEN/TS 54-32:2015

This Technical Specification provides guidelines for the planning, design, installation, commissioning, use, maintenance and modification of voice alarm systems in and around buildings that broadcast information for the protection of lives in a fire emergency. See EN 54 1:2011, Figure 1, item C and item M.
These guidelines cover voice alarm systems that are triggered automatically by a fire detection and fire alarm system or that are manually triggered, or both.
This Technical Specification does not apply to fire detection and fire alarm systems that only use voice sounders, bells or sounders or a combination of these.
NOTE 1   CEN/TS 54-14 provides guidelines for these systems.
This Technical Specification does not exclude the use of voice alarm systems for emergency purposes other than fire emergency.
NOTE 2   When used for emergencies other than those due to fire, it might be appropriate to modify the guidance in this Technical Specification.
This Technical Specification does not exclude the use of voice alarm systems for non-emergency purposes.

  • Technical specification
    80 pages
    English language
    sale 10% off
    e-Library read for
    1 day