EN 15254-4:2008

Extended application of results from fire resistance tests - Non-loadbearing walls - Part 4: Glazed constructions

This European standard provides guidance and, where appropriate, defines procedures for variations of certain parameters and factors associated with the design of fire resistant glazed elements which have been tested in accordance with EN 1364-1, and classified according to EN 13501-2.
Extended application of fire resistant glazed elements shall be based on test evidence.
This standard only applies to vertically installed fire resistant glazed elements.
This standard does not apply to doorsets and openable windows according to EN 1634.
Glass block assemblies and paver units and channel-shaped glass as defined in EN 1051-1 and EN 572-7 are excluded. There is currently insufficient information available to enable rules for extended application to be developed for these products.
NOTE   Some partition walls use a combination of fire resistant glass, non-translucent and other opaque products. The extended application in this case only covers the glass when it replaces these products - see clause 8.2.

Erweiterter Anwendungsbereich der Ergebnisse von Feuerwiderstandsprüfungen - Nichttragende Wände - Teil 4: Verglaste Konstruktionen

Diese Europäische Norm gibt eine Anleitung und definiert, wo zutreffend, Verfahren für Änderungen von bestimmten Parametern und Faktoren, die mit der Ausführung von feuerwiderstandsfähigen verglasten Bauteilen in Verbindung stehen, die nach EN 1364 1 geprüft und nach EN 13501 2 klassifiziert wurden.
Erweiterte Anwendungsbereiche der feuerwiderstandsfähigen verglasten Bauteile basieren auf Prüfdaten.
Diese Norm bezieht sich nur auf vertikal eingebaute feuerwiderstandsfähige verglaste Bauteile.
Diese Norm gilt nicht für Tore, Türen und zu öffnende Fenster mit Feuer- und/oder Rauchschutzeigenschaften nach EN 1634 1.
Bausätze aus Glasbausteinen und Betongläsern sowie Profilbaugläser, wie in EN 1051 1 und EN 572 7 definiert, sind ausgeschlossen. Hierzu liegen gegenwärtig keine ausreichenden Informationen vor, um Regeln für den erweiterten Anwendungsbereich für diese Produkte zu erstellen.
ANMERKUNG   Einige Trennwände bestehen aus einer Kombination von feuerwiderstandsfähigem Glas, nicht durchscheinenden oder anderen undurchsichtigen Bauteilen. Im Falle solcher Konstruktionen gilt der erweiterte Anwendungsbereich nur dann für das Glas, wenn es diese Produkte ersetzt – siehe 8.2.

Extension du champ d'application des résultats des essais de résistance au feu - Éléments non-porteurs - Partie 4 : Constructions vitrées

La présente Norme européenne fournit des conseils et, le cas échéant, définit des procédures pour les variations de certains paramètres et facteurs liés à la conception d'éléments vitrés résistant au feu qui ont été testés conformément à l'EN 1364-1, et classés conformément à l'EN 13501-2.
L'application étendue d'éléments vitrés résistant au feu doit être basée sur une preuve obtenue par des essais.
La présente norme s'applique uniquement aux éléments vitrés résistant au feu installés verticalement.
La présente norme ne s'applique pas aux portes et aux fenêtres ouvrantes conformes à l'EN 1634.
Les ensembles de bloc de verre, les unités de pavage et le verre profilé en U tels que définis dans les normes EN 1051 1 et EN 572 7 sont exclus. Les informations disponibles actuellement sont insuffisantes pour permettre de développer des règles relatives aux applications étendues pour ces produits.
NOTE   Certaines cloisons de séparation utilisent une combinaison de produits résistant au feu en verre, non translucides et autres produits opaques. Dans ce cas, l'application étendue couvre uniquement le verre lorsqu'il remplace ces produits . voir paragraphe 8.2.

Razširjena uporaba rezultatov preskusov požarne odpornosti - Nenosilne stene - 4. del: Zastekljena konstrukcija

General Information

• Status: Withdrawn
• Publication Date: 19-Feb-2008
• Withdrawal Date: 05-Jul-2011
• ICS: 13.220.50 - Fire-resistance of building materials and elements
• Technical Committee: CEN/TC 127 - Fire safety in buildings
• Drafting Committee: CEN/TC 127/WG 1 - Structural and separating elements
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 06-Jul-2011
• Completion Date: 06-Jul-2011
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/117 - Horizontal complement to the mandates to CEN/CENELEC concerning the execution of standardization work for the valuation of construction products and elements in respect of their resistance to fire
• Ref Project: SIST EN 15254-4:2008 - Extended application of results from fire resistance tests - Non-loadbearing walls - Part 4: Glazed construction

Relations

• Merged Into: EN 15254-4:2008+A1:2011 - Extended application of results from fire resistance tests - Non-loadbearing walls - Part 4: Glazed constructions
• Effective Date: 18-Jan-2023
• Amended By: EN 15254-4:2008/FprA1 - Extended application of test results from fire resistance tests - Non-loadbearing walls - Part 4: Glazed constructions
• Effective Date: 13-Jun-2009

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Razširjena uporaba rezultatov preskusov požarne odpornosti - Nenosilne stene - 4. del: Zastekljena konstrukcijaErweiteter Anwendungsbereich der Ergebnisse aus Feuerwiderstandsprüfungen - Nichttragende Wände - Teil 4: Verglaste KonstruktionenApplication étendue des résultats d'essais de résistance au feu - Murs non porteurs - Partie 4 : Constructions vitréesExtended application of results from fire resistance tests - Non-loadbearing walls - Part 4: Glazed construction91.060.10Stene. Predelne stene. FasadeWalls. Partitions. Facades13.220.50Požarna odpornost gradbenih materialov in elementovFire-resistance of building materials and elementsICS:Ta slovenski standard je istoveten z:EN 15254-4:2008SIST EN 15254-4:2008en01-april-2008SIST EN 15254-4:2008SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 15254-4February 2008ICS 13.220.50 English VersionExtended application of results from fire resistance tests - Non-loadbearing walls - Part 4: Glazed constructionsExtension du champ d'application des résultats des essaisde résistance au feu - Éléments non-porteurs - Partie 4 :Constructions vitréesErweiterter Anwendungsbereich der Ergebnisse vonFeuerwiderstandsprüfungen - Nichttragende Wände - Teil4: Verglaste KonstruktionenThis European Standard was approved by CEN on 15 December 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15254-4:2008: ESIST EN 15254-4:2008

Examples for using this standard in regard to requested extended applications based on reference and previously existing test data.20 A.1 Examples for Integrity only glass (E Classification) based on Table A.1.20 A.2 Examples for Integrity and Radiation glass (EW Classification) based on Table A2.23 A.3 Examples for Integrity and Insulation glass (EI Classification) based on Table A3.25 Annex B (normative)
Radiation calculations.27 B.1 Radiation calculations.27 B.1.1 General.27 B.1.2 Rectangular fire resistant glass panes or elements.27 B.1.3 Circular fire resistant glass panes or elements.28 B.1.4 Other shapes of Fire resistant glass panes or elements.29 Bibliography.35 SIST EN 15254-4:2008

This standard does not apply to doorsets and openable windows according to EN 1634-1. Glass block assemblies and paver units and channel-shaped glass as defined in EN 1051-1 and EN 572-7 are excluded. There is currently insufficient information available to enable rules for extended application to be developed for these products. NOTE Some partition walls use a combination of fire resistant glass, non-translucent and other opaque products. The extended application in this case only covers the glass when it replaces these products – see clause 8.2. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 357:2004, Glass in building — Fire resistant glazed elements with transparent or translucent glass products — Classification of fire resistance EN 1363-1:1999, Fire resistance tests — Part 1: General requirements EN 1363-2, Fire resistance tests — Part 2: Alternative and additional procedures EN 1364-1, Fire resistance tests for non-loadbearing elements — Part 1: Walls EN 1995-1-2, Eurocode 5: Design of timber structures - Part 1-2: General - Structural fire design EN 13501-2, Fire classification of construction products and building elements — Part 2: Classification using data from fire resistance tests, excluding ventilation services 3 Terms and definitions For the purposes of this document the terms and definitions given in EN 357:2004 and EN 13501-2, together with the following apply. 3.1 fire resistant glass glass product group, monolithic, multiple layers or insulating glass unit, when used in a fire resistant glazed element, can be classified in accordance with EN 13501-2 NOTE 1 The glass can be classified for the purposes of CE marking according to the glass product group determined by the glass manufacturer and tested as a virtual assembly. Classification of fire resistant glass is a mandated requirement within the European Community. NOTE 2 The term “insulating” when used as an insulating glass unit according to EN 1279–1, should not be confused with the term “insulation” used in EN 13501–-2 classification standard for fire resistant glazed element. SIST EN 15254-4:2008

 fire performance classification (integrity E, integrity with radiation EW or integrity with insulation EI);
 maximum
...