EN 840-4:2012

Mobile waste and recycling containers - Part 4: Containers with 4 wheels with a capacity up to 1 700 l with flat lid(s), for wide trunnion or BG- and/or wide comb lifting devices - Dimensions and design

This European Standard specifies dimensions and design requirements of mobile waste and recycling containers with 4 wheels, with flat lid(s) and capacity up to 1 700 l to be used by wide trunnion or BG-lifting device and/or wide comb lifting device.

Fahrbare Abfall- und Wertstoffbehälter - Teil 4: Behälter mit 4 Rädern und einem Nennvolumen bis 1700 l mit Flachdeckel(n), für breite Schüttungen mit Zapfenaufnahme oder BG-Schüttungen und/oder für breite Kammschüttungen - Maße und Formgebung

Die Europäische Norm legt Maße und Anforderungen an die Formgebung von fahrbaren Abfall- und Wertstoffbehältern (im Folgenden kurz Behälter genannt) mit 4 Rädern, mit Flachdeckel(n) und einem Nenn-volumen bis 1 700 l für breite Schüttungen für Zapfenaufnahme oder BG-Schüttungen und/oder breite Kamm-schüttungen fest.

Conteneurs roulants à ordures ménagères et recyclables - Partie 4: Conteneurs à 4 roues de capacité inférieure ou égale à 1 700 l à couvercle(s) plat(s), pour lève-conteneurs par tourillon large ou BG-basculeurs et/ou lève-conteneurs à peigne large - Dimensions et conception

La présente Norme européenne spécifie les dimensions et les exigences de conception pour les conteneurs à ordures ménagères et recyclables roulants à quatre roues à couvercle(s) plat(s) dont la capacité est inférieure ou égale à 1 700 l, pour lève-conteneurs par tourillon large ou BG-basculeurs et/ou lève-conteneurs à peigne large.

Premični zabojniki za odpadke in za recikliranje - 4. del: Zabojniki na štirih kolesih s prostornino do 1700 l in ravnim(-i) pokrovom(-i) za široke iztresalnike z rokama ali BG in/ali glavnikom - Mere in oblika

General Information

• Status: Withdrawn
• Publication Date: 11-Dec-2012
• Withdrawal Date: 07-Apr-2020
• ICS: 13.030.40 - Installations and equipment for waste disposal and treatment
• Technical Committee: CEN/TC 183 - Waste management
• Drafting Committee: CEN/TC 183/WG 1 - Waste containers
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 08-Apr-2020
• Ref Project: SIST EN 840-4:2014 - Mobile waste and recycling containers - Part 4: Containers with 4 wheels with a capacity up to 1 700 l with flat lid(s), for wide trunnion or BG- and/or wide comb lifting devices - Dimensions and design

Relations

• Replaces: EN 840-4:2004 - Mobile waste containers - Part 4: Containers with 4 wheels with a capacity up to 1 700 l with flat lid(s), for wide trunnion or BG- and/or wide comb lifting devices - Dimensions and design
• Effective Date: 22-Dec-2008
• Replaced By: EN 840-4:2020 - Mobile waste and recycling containers - Part 4: Containers with 4 wheels with a capacity up to 1 700 l with flat lid(s), for wide trunnion or BG- and/or wide comb lifting devices - Dimensions and design
• Effective Date: 28-Feb-2018

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Fahrbare Abfall- und Wertstoffbehälter - Teil 4: Behälter mit 4 Rädern und einem Nennvolumen bis 1700 l mit Flachdeckel(n), für breite Schüttungen mit Zapfenaufnahme oder BG-Schüttungen und/oder für breite Kammschüttungen - Maße und FormgebungConteneurs roulants à ordures ménagères et recyclables - Partie 4: Conteneurs à 4 roues de capacité inférieure ou égale à 1 700 l à couvercle(s) plat(s), pour lève-conteneurs par tourillon large ou BG-basculeurs et/ou lève-conteneurs à peigne large - Dimensions et conceptionMobile waste and recycling containers - Part 4: Containers with 4 wheels with a capacity up to 1 700 l with flat lid(s), for wide trunnion or BG- and/or wide comb lifting devices - Dimensions and design13.030.40Naprave in oprema za odstranjevanje in obdelavo odpadkovInstallations and equipment for waste disposal and treatmentICS:Ta slovenski standard je istoveten z:EN 840-4:2012SIST EN 840-4:2014en,fr,de01-marec-2014SIST EN 840-4:2014SLOVENSKI
STANDARDSIST EN 840-4:20041DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 840-4
December 2012 ICS 13.030.40 Supersedes EN 840-4:2004English Version
Mobile waste and recycling containers - Part 4: Containers with 4 wheels with a capacity up to 1 700 l with flat lid(s), for wide trunnion or BG- and/or wide comb lifting devices - Dimensions and design
Conteneurs roulants à ordures ménagères et recyclables - Partie 4: Conteneurs à 4 roues de capacité inférieure ou égale à 1 700 l à couvercle(s) plat(s), pour lève-conteneurs par tourillon large ou BG-basculeurs et/ou lève-conteneurs à peigne large - Dimensions et conception
Fahrbare Abfall- und Wertstoffbehälter - Teil 4: Behälter mit 4 Rädern und einem Nennvolumen bis 1700 l mit Flachdeckel(n), für breite Schüttungen mit Zapfenaufnahme oder BG-Schüttungen und/oder für breite Kammschüttungen - Maße und Formgebung This European Standard was approved by CEN on 22 September 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 840-4:2012: ESIST EN 840-4:2014

Recommendations for manufacturers of lifting devices . 15Annex B (informative)
A-Deviations . 17Bibliography . 18 SIST EN 840-4:2014

3.2 lifting device structure which picks-up, tilts and empties containers 3.3 comb lifting device lifting device in which the picking-up system consists of a row of teeth and a locking system to retain the container during emptying 3.4 trunnion lifting device lifting device in which the picking-up system consists of a pair of arms with automatic locking mechanism to fit the trunnion to retain the container during emptying 3.5 BG lifting device lifting device in which the picking-up system consists of a pair of arms with adaptors that fit the BG receivers and locks them in order to retain the container during emptying
Note 1 to entry: See Figures 5 and 6. SIST EN 840-4:2014

Note 1 to entry: See Table 1 without tolerances. Note 2 to entry: The English term "capacity" and the French term "capacité" are translated in the German version by the term "Nennvolumen". 3.8 nominal mass mass, which is calculated as given in Clause 6 3.9 total permissible mass mass of the container plus the nominal load 3.10 functional and safety dimensions essential dimensions which ensure the functionality and interchangeability of the container with the compatible lifting device and which are necessary for the operator's safety and health 4 Volumes This part of EN 840 identifies the two classes of containers:  Class I - small size (nominal volume up to 1 050 l);  Class II - large size (nominal volume between 1 050 l and 1 700 l). Within the two above-mentioned classes of containers the following volumes are identified: 750 l, 1 000 l, 1 300 l, 1 400 l, 1 500 l, 1 600 l and 1 700 l. Nominal volumes different from those referenced can be used by agreement between user and manufacturer. The tolerance of the volumes shall be ± 5 % maximum measured according to EN 840-5. 5 Dimensions and design 5.1 The design of the containers do not need to correspond to the drawings given in Figure 1. The functional dimensions given in Table 1 shall be respected. Recommendations for manufacturers of lifting devices are given in Annex A (see also EN 1501-1). 5.2 The container shall be constructed so that when it is unloaded or loaded with a nominal load (see Clause 6), it fits on an approved compatible lifting device. It shall be automatically locked safely into the lifting device during the lifting operation. If the container is equipped with a comb receiver, it shall correspond to Figure 2.
5.3 The lid(s) shall cover the opening of the container completely. It shall be opened easily by itself during the emptying cycle It/they shall be made with at least two fixing points and have at least one means of opening. SIST EN 840-4:2014

Container
EN 840-4
1 700
A
A
440 Description
Standard number
Nominal volume, in litres
Frontal receiver form:
A = frontal receiver
0 = without frontal receiver
Lateral receiver:
A = trunnions
B = BG receiver
0 = without lateral receiver
Nominal load, in kilograms
...