Bituminous mixtures - Test method - Part 33: Specimen prepared by roller compactor

This document specifies the methods for compacting parallelepipedal specimens (slabs) of bituminous mixtures, to be used directly for subsequent testing, or from which test specimens are cut.
For a given mass of bituminous mixture, the specimens are prepared either under controlled compaction energy, or until a specified volume and therefore air voids content is obtained.
This document describes the following methods of compaction:
- method using a wheel or two wheels fitted with pneumatic tyres;
- methods using a steel roller, which includes 3 different procedures:
- steel roller;
- steel roller used on wheel fitted with pneumatic tyres;
- steel roller running on vertical sliding steel plates;
- method using a steel roller sector.
This document is applicable to bituminous mixtures manufactured in the laboratory or in a mixing plant.

Asphalt - Prüfverfahren - Teil 33: Probestückvorbereitung mittels Walzverdichtungsgerät

Dieses Dokument legt die Verfahren für die Verdichtung von quaderförmigen Probekörpern (Platten) aus Asphalt fest, die entweder direkt für die anschließende(n) Prüfung(en) verwendet werden oder aus denen Probekörper geschnitten werden.
Von einem vorgegebenen Asphaltmischgut können Probekörper entweder mit einer geregelten Verdichtungsenergie oder bis zum Erreichen eines bestimmten Volumens und infolgedessen eines bestimmten Hohlraumgehaltes hergestellt werden.
Dieses Dokument beschreibt die folgenden Verdichtungsverfahren:
—   Verfahren mit einem Rad oder zwei Rädern mit Luftbereifung;
—   Verfahren mit einer Stahlwalze, die 3 verschiedene Verfahrensabläufe umfassen:
—   Stahlwalze;
—   Stahlwalze auf Rädern mit Luftbereifung;
—   Stahlwalze auf vertikalen Stahl-Gleitplatten;
—   Verfahren mit einem Stahlwalzensegment.
Dieses Dokument gilt für Asphalte, die im Labor oder im Asphaltwerk hergestellt wurden.

Mélanges bitumineux - Méthodes d'essai - Partie 33 : Préparation de corps d'épreuve au compacteur de plaque

Ce document spécifie les méthodes de compactage des éprouvettes parallélépipédiques (plaques) de mélanges bitumineux, qui doivent être utilisées directement pour des essais ultérieurs ou à partir desquelles des éprouvettes sont prélevées.
Pour une masse donnée de mélange bitumineux, les éprouvettes peuvent être préparées soit à une énergie de compactage contrôlée, soit à volume spécifié, et par conséquent une teneur en vides d’air est obtenue.
Ce document décrit les méthodes de compactage suivantes :
—   méthode utilisant une ou deux roues équipées de pneumatiques,
—   méthode utilisant un rouleau en acier, qui comprend 3 procédures différentes :
—   rouleau en acier ;
—   rouleau en acier monté sur une roue équipée de pneumatiques ;
—   rouleau en acier se déplaçant sur des couteaux en acier verticaux ;
—   méthode utilisant une portion de rouleau en acier
Ce document s’applique aux mélanges bitumineux fabriqués en laboratoire ou en centrale d’enrobage.

Bitumenske zmesi - Preskusne metode - 33. del: Preskušanci, pripravljeni z valjastim zgoščevalnikom

Ta evropski standard določa metode za zgoščevanje paralelepipednih preskušancev (plošč) iz bitumenskih zmesi, ki se uporabljajo neposredno za nadaljnje preskušanje ali iz katerih se izrežejo preskušanci.
Pri določeni masi bitumenske zmesi se preskušanci pripravijo z regulirano zgoščevalno energijo, ali dokler ni dosežena določena prostornina in posledično vsebnost zračnih votlin.
Ta evropski standard opisuje naslednje metode zgoščevanja:
– metoda s pnevmatikami;
– metoda z jeklenimi valji;
– metoda s predeli jeklenih valjev.
Ta evropski standard se uporablja za bitumenske zmesi, izdelane v laboratoriju ali obratu za mešanje.

General Information

Status
Withdrawn
Publication Date
05-Mar-2019
Withdrawal Date
11-Oct-2022
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
12-Oct-2022

Relations

Buy Standard

Standard
EN 12697-33:2019
English language
22 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 12697-33:2017
English language
23 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Asphalt - Prüfverfahren - Teil 33: Probestückvorbereitung mittels WalzverdichtungsgerätMélanges bitumineux - Méthodes d'essai - Partie 33 : Préparation de corps d'épreuve au compacteur de plaqueBituminous mixtures - Test method - Part 33: Specimen prepared by roller compactor93.080.20Materiali za gradnjo cestRoad construction materialsICS:Ta slovenski standard je istoveten z:EN 12697-33:2019SIST EN 12697-33:2019en,fr,de01-maj-2019SIST EN 12697-33:2019SLOVENSKI
STANDARDSIST EN 12697-33:2004+A1:20071DGRPHãþD



SIST EN 12697-33:2019



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12697-33
March
t r s { ICS
{ uä r z rä t r Supersedes EN
s t x { yæ u uã t r r u ªA sã t r r yEnglish Version
Bituminous mixtures æ Test method æ Part
u uã Specimen prepared by roller compactor Mélanges bitumineux æ Méthodes d 5essai æ Partie
u u ã Préparation de corps d 5épreuve au compacteur de plaque
Asphalt æ Prüfverfahren æ Teil
u uã Probestückvorbereitung mittels Walzverdichtungsgerät This European Standard was approved by CEN on
s { November
t r s zä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Rue de la Science 23,
B-1040 Brussels
9
t r s { CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s t x { yæ u uã t r s { ESIST EN 12697-33:2019



EN 12697-33:2019 (E) 2 Contents Page European foreword . 3 1 Scope . 4 2 Normative references . 4 3 Terms and definitions . 4 4 Principle . 6 5 Apparatus . 6 5.1 Method using a wheel or two wheels fitted with pneumatic tyres . 6 5.2 Methods using a smooth steel roller . 7 5.2.1 Smooth steel roller . 7 5.2.2 Steel roller used on wheel fitted with pneumatic tyres . 7 5.3 Method using a steel roller sector . 8 5.3.1 General . 8 5.3.2 Roller sector . 8 5.3.3 Compaction mould . 8 5.3.4 Loading device . 8 5.3.5 Demoulding facilities . 8
...

SLOVENSKI STANDARD
oSIST prEN 12697-33:2017
01-oktober-2017
%LWXPHQVNH]PHVL3UHVNXVQHPHWRGHGHO3UHVNXãDQFLSULSUDYOMHQL]
YDOMDVWLP]JRãþHYDOQLNRP
Bituminous mixtures - Test methods - Part 33: Specimen prepared by roller compactor
Asphalt - Prüfverfahren - Teil 33: Probestückvorbereitung mittels Walzverdichtungsgerät
Mélanges bitumineux - Méthodes d'essai pour mélange hydrocarboné à chaud - Partie
33 : Préparation de corps d'épreuve au compacteur de plaque
Ta slovenski standard je istoveten z: prEN 12697-33
ICS:
93.080.20 Materiali za gradnjo cest Road construction materials
oSIST prEN 12697-33:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 12697-33:2017

---------------------- Page: 2 ----------------------
oSIST prEN 12697-33:2017


DRAFT
EUROPEAN STANDARD
prEN 12697-33
NORME EUROPÉENNE

EUROPÄISCHE NORM

August 2017
ICS 93.080.20 Will supersede EN 12697-33:2003+A1:2007
English Version

Bituminous mixtures - Test methods - Part 33: Specimen
prepared by roller compactor
Mélanges bitumineux - Méthodes d'essai - Partie 33 : Asphalt - Prüfverfahren - Teil 33:
Préparation des corps d'épreuve au compacteur de Probestückvorbereitung mittels
plaques Walzverdichtungsgerät
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 227.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 12697-33:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 12697-33:2017
prEN 12697-33:2017 (E)
Contents Page
European foreword . 3
1 Scope . 7
2 Normative references . 7
3 Terms, definitions, symbols and abbreviations . 7
3.1 Terms and definitions . 7
3.2 Symbols and abbreviations . 9
4 Principle . 9
5 Apparatus . 9
5.1 Method using a wheel or two wheels fitted with pneumatic tyres . 9
5.2 Methods using a smooth steel roller . 10
5.2.1 Smooth steel roller .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.