iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

prEN 18067

(Main)

Plastics - Recycled plastics - Characterization of Acrylonitrile-Butadiene-Styrene (ABS) recyclates

Plastics - Recycled plastics - Characterization of Acrylonitrile-Butadiene-Styrene (ABS) recyclates

This document specifies the main characteristics and associated test methods for assessing of acrylonitrile-butadiene-styrene (ABS) recyclates intended for use in the production of semi-finished/finished products.
It is intended to support parties involved in the use of ABS recyclates (rABS) to agree on specifications for specific and generic applications.
This document does not cover the characterization of plastics wastes, which is covered by the EN 15347 series, neither traceability topics which are covered by EN 15343.

Kunststoffe - Kunststoff-Rezyklate - Charakterisierung von Acrylnitril-Butadien-Styrol(ABS)-Rezyklaten

Dieses Dokument benennt die wichtigsten Eigenschaften und die dazugehörigen Prüfverfahren für die Bewertung von Acrylnitril-Butadien-Styrol(ABS)-Rezyklaten, die für die Produktion von Halbzeugen/Fertigprodukten vorgesehen sind.
Es ist dafür vorgesehen (Vertrags )Partner, die sich mit dem Einsatz von ABS-Rezyklaten (rABS) beschäftigen, bei der Einigung auf Spezifikationen für spezifische oder allgemeine Anwendungen zu unterstützen.
Dieses Dokument behandelt weder die Charakterisierung von Kunststoffabfällen, die von der Normen-reihe EN 15347 abgedeckt werden, noch Themen zur Rückverfolgbarkeit, die von EN 15343 abgedeckt werden.

Plastiques - Plastiques recyclés - Caractérisation des recyclats d’acrylonitrile-butadiène-styrène (ABS)

Le présent document spécifie les principales caractéristiques et les méthodes d’essai associées pour évaluer les recyclats d’acrylonitrile-butadiène-styrène (ABS) destinés à être utilisés dans la production de produits semi-finis/finis.
Il est destiné à aider les parties concernées par l’utilisation de recyclats d’ABS (rABS) pour convenir de spécifications concernant des applications spécifiques ou générales.
Le présent document ne couvre pas la caractérisation des déchets de plastiques, qui est couverte par la série EN 15347, ou les questions de traçabilité qui sont couvertes par l’EN 15343.

Polimerni materiali - Reciklirani polimerni materiali - Karakterizacija reciklatov akrilonitril-butadien-stirena (ABS)

General Information

Status
Not Published
Publication Date
15-May-2025
ICS
13.030.50 - Recycling
83.080.01 - Plastics in general
Technical Committee
CEN/TC 249 - Plastics
Drafting Committee
CEN/TC 249/WG 11 - Plastics recycling
Current Stage
4020 - Submission to enquiry - Enquiry
Start Date
07-Mar-2024
Due Date
29-Dec-2023
Completion Date
07-Mar-2024
Mandate
M/584 - Plastics recycling and recycled plastics
Ref Project
oSIST prEN 18067:2024 - Plastics - Recycled plastics - Characterization of Acrylonitrile-Butadiene-Styrene (ABS) recyclates

Buy Standard

prEN 18067:2024prEN 18067:2024
PreviousNext
Draft
prEN 18067:2024
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 18067:2024
01-maj-2024
Polimerni materiali - Reciklirani polimerni materiali - Karakterizacija reciklatov
akrilonitril-butadien-stirena (ABS)
Plastics - Recycled plastics - Characterization of Acrylonitrile-Butadiene-Styrene (ABS)
recyclates
Kunststoffe - Kunststoff-Rezyklate - Charakterisierung von Acrylnitril-Butadien-Styrol
(ABS)-Rezyklaten
Plastiques - Plastiques recyclés - Caractérisation des recyclats d’acrylonitrile-butadiène-
styrène (ABS)
Ta slovenski standard je istoveten z: prEN 18067
ICS:
13.030.50 Recikliranje Recycling
83.080.01 Polimerni materiali na Plastics in general
splošno
oSIST prEN 18067:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 18067:2024

---------------------- Page: 2 ----------------------
oSIST prEN 18067:2024


DRAFT
EUROPEAN STANDARD
prEN 18067
NORME EUROPÉENNE

EUROPÄISCHE NORM

March 2024
ICS 13.030.50; 83.080.01
English Version

Plastics - Recycled plastics - Characterization of
Acrylonitrile-Butadiene-Styrene (ABS) recyclates
 Kunststoffe - Kunststoff-Rezyklate ¿ Charakterisierung
von Acrylnitril-Butadien-Styrol (ABS)-Rezyklaten
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 249.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 18067:2024 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 18067:2024
prEN 18067:2024 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Symbols and abbreviations . 6
5 Characterization of ABS recyclates . 6
6 Quality assurance . 9
Bibliography . 10
2

---------------------- Page: 4 ----------------------
oSIST prEN 18067:2024
prEN 18067:2024 (E)
European foreword
This document (prEN 18067:2024) has been prepared by Technical Committee CEN/TC 249 “Plastics”,
the secretariat of which is held by SIS.
This document is currently submitted to th
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
CEN/TS 16010:2020(Main)
Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates
SIST-TS CEN/TS 16010:2021

This document specifies a system for sampling procedures for testing plastics waste and recyclates which take into account the specifics of the plastics waste and recyclates. It is intended to cover all stages of the plastic recycling process.
The sampling procedures include the statistical specifics of the plastic waste and the behaviour of recyclates.
The sampling method is expected to produce a representative testing sample. Differences can arise due to:
-   the mixture of plastics;
-   the origin (e.g. green dot in Germany, or electronic/automotive industry);
-   the previous use of the plastic material;
-   the residual contents (e.g. of containers);
-   inert, residual or moisture content on or in the material.
This document is without prejudice to any existing legislation.

  • Technical specification
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 16011:2013(Main)
Plastics - Recycled plastics - Sample preparation
SIST-TS CEN/TS 16011:2014

This Technical Specification specifies the preparation of samples of recycled plastics prior to testing and takes account of the specifics of the material.
Sample preparation should avoid any process that causes 'de-mixing' of the sample. Following preparation, the sample should remain representative.
The behaviour of contaminants should be carefully analysed and observed to ensure this is homogeneous.
This Technical Specification does not address any legal or product safety issues.

  • Technical specification
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15347:2007(Main)
Plastics - Recycled Plastics - Characterisation of plastics wastes
SIST EN 15347:2008

This European Standard provides a scheme for the characterisation of plastics wastes, laying out those properties for which the supplier of the waste shall make information available to the purchaser, and identifying test methods where applicable. The scheme provides for a division of information between "Required Data", where a statement is required, even if it is "unclassified", and additional "Optional Data" which the supplier may choose to provide if it adds value to the waste.
This standard is applicable without prejudice to any existing legislation.
NOTE   This standard does not cover the characterisation of plastics recyclates.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 15353:2007(Main)
Plastics - Recycled plastics - Guidelines for the development of standards for recycled plastics
SIST-TP CEN/TR 15353:2007

This Technical Report provides a format for the drafting of standards for recycled plastics.  It is intended for use by all those who are preparing drafts for consideration by the Technical Committee.
The guide provides information for the development of standards (guides, practices, test methods, and specifications) relating to the proper use of recycled plastics.

  • Technical report
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 18064-2(Main)
Plastics - Quality recommendations and basis for specifications for application of plastic recyclates in products - Part 2 : Polyethylene (PE)
oSIST prEN 18064-2:2024

This document provides relevant characteristics and typical values for polyethylene (PE) recyclates intended for groups of defined applications (the product families).
The relevant characteristics and typical values for the different product families are derived from the performance requirements of the products belonging to that family, including requirements for product manufacturing processes where applicable.
This document applies to plastic recyclates intended to be used for the manufacturing of (intermediate) products.
This document is intended to be used in conjunction with part 1 of this standard series, which describes the designation system for plastic recyclates. The designation system allows comparison between recycled and virgin material at the level of the polymer's defined designatory properties.
NOTE 1   Examples of designations of plastic recyclates are given in Annex A.
NOTE 2   The selection of relevant properties for a product family is based on EN ISO 10350 1, extended with specific properties related to plastic recyclates.

  • Draft
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 18064-7(Main)
Plastics - Quality recommendations and basis for specifications for application of plastic recyclates in products - Part 7 : Acrylonitrile- butadiene-styrene (ABS)
oSIST prEN 18064-7:2024

This document provides relevant characteristics and typical values for Acrylonitrile-butadiene-styrene (ABS) recyclates intended for groups of defined applications (the product families).
The relevant characteristics and typical values for the different product families are derived from the performance requirements of the products belonging to that family, including requirements for product manufacturing processes where applicable.
This document applies to plastic recyclates intended to be used for the manufacturing of (intermediate) products.
This document is intended to be used in conjunction with part 1 of this standard series, which describes the designation system for plastic recyclates. The designation system allows comparison between recycled and virgin material at the level of the polymer’s defined designatory properties.
NOTE 1   Examples of designations of plastic recyclates are given in Annex A.
NOTE 2   The selection of relevant properties for a product family is based on EN ISO 10350 1, extended with specific properties related to plastic recyclates.

  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 18064-4(Main)
Plastics - Quality recommendations and basis for specifications for application of plastic recyclates in products - Part 4 : Poly(ethylene terephtalate) (PET)
oSIST prEN 18064-4:2024

This document provides relevant characteristics and typical values for PET recyclates intended for groups of defined applications (the product families).
The relevant characteristics and typical values for the different product families are derived from the performance requirements of the products belonging to that family, including requirements for product manufacturing processes where applicable.
This document applies to plastic recyclates intended to be used for the manufacturing of (intermediate) products.
This document is intended to be used in conjunction with part 1 of this standard series, which describes the designation system for plastic recyclates. The designation system allows comparison between recycled and virgin material at the level of the polymer's defined designatory properties.
NOTE 1   Examples of designations of plastic recyclates are given in the Annex A.
NOTE 2   The selection of relevant properties for a product family is based on EN ISO 10350 1, extended with specific properties related to plastic recyclates.

  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 18064-1(Main)
Plastics - Quality recommendations and basis for specifications for application of plastic recyclates in products - Part 1: General aspects
oSIST prEN 18064-1:2024

This document is the general part of the series that describes the designation system for plastic recyclates.
This document is dealing with recyclates after the recycling operation and prior to converting and compounding (when applicable). It is dealing with preparation of samples and determination of properties.
NOTE 1   This document supports the underlaying standards of this series that, per polymer type, provide an overview of the relevant characteristics and typical values for recyclates for use in certain application groups (product families) in combination with the relevant converting technologies.
NOTE 2   The overview of the relevant properties is based on and further extends the relevant properties given in EN ISO 10350 1.

  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 18064-5(Main)
Plastics - Quality recommendations and basis for specifications for application of plastic recyclates in products - Part 5 : Poly(vinyl chloride) (PVC)
oSIST prEN 18064-5:2024

This document provides relevant characteristics and typical values for poly(vinyl chloride) (PVC) recyclates intended for groups of defined applications (the product families).
The relevant characteristics and typical values for the different product families are derived from the performance requirements of the products belonging to that family, including requirements for product manufacturing processes where applicable.
This document applies to plastic recyclates intended to be used for the manufacturing of (intermediate) products.
This document is intended to be used in conjunction with part 1 of this standard series, which describes the designation system for plastic recyclates. The designation system allows comparison between recycled and virgin material at the level of the polymer’s defined designatory properties.
NOTE 1   Examples of designations of plastic recyclates are given in Annex A.
NOTE 2   The selection of relevant properties for a product family is based on EN ISO 10350 1, extended with specific properties related to plastic recyclates.

  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 18064-3(Main)
Plastics Quality recommendations and basis for specifications for application of plastic recyclates in products - Part 3 : Polypropylene (PP)
oSIST prEN 18064-3:2024

This document provides relevant characteristics and typical values for polypropylene (PP) recyclates intended for groups of defined applications (the product families).
The relevant characteristics and typical values for the different product families are derived from the performance requirements of the products belonging to that family, including requirements for product manufacturing processes where applicable.
This document applies to plastic recyclates intended to be used for the manufacturing of (intermediate) products.
This document is intended to be used in conjunction with part 1 of this standard series, which describes the designation system for plastic recyclates. The designation system allows comparison between recycled and virgin material at the level of the polymer’s defined designatory properties.
NOTE 1   Examples of designations of plastic recyclates are given in Annex A.
NOTE 2   The selection of relevant properties for a product family is based on EN ISO 10350 1, extended with specific properties related to plastic recyclates.

  • Draft
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day