EN ISO 18369-2:2017

Ophthalmic optics - Contact lenses - Part 2: Tolerances (ISO 18369-2:2017)

ISO 18369-2:2017 specifies the tolerance limits of the principal optical and physical parameters of rigid corneal, rigid scleral and soft contact lenses at the time of manufacture.
These tolerances might not apply to other purposes, for example, shelf-life studies.

Augenoptik - Kontaktlinsen - Teil 2: Grenzabweichungen (ISO 18369-2:2017)

Dieser Teil von ISO 18369 legt die Grenzabmaße bzw. Grenzabweichungen für die optischen und physikali-schen Eigenschaften von formstabilen Korneal- und formstabilen Skleral- und weichen Kontaktlinsen zum Zeitpunkt der Herstellung fest.
Diese Grenzabmaße bzw. Grenzabweichungen können nicht für andere Zwecke, wie z. B. Haltbarkeitsstudien, angewendet werden,

Optique ophtalmique - Lentilles de contact - Partie 2: Tolérances (ISO 18369-2:2017)

ISO 18369-2:2017 spécifie les limites de tolérance des principaux paramètres optiques et physiques des lentilles de contact cornéennes rigides, sclérales rigides et souples au moment de leur fabrication.
Ces tolérances peuvent ne pas s'appliquer à d'autres fins, par exemple, à des études de durée de conservation.

Očesna optika - Kontaktne leče - 2. del: Tolerance (ISO 18369-2:2017)

Ta dokument določa tolerančne meje glavnih optičnih in fizikalnih parametrov trdih roženičnih, trdih beločničnih in mehkih kontaktnih leč med izdelavo.
Te tolerance se morda ne uporabljajo za druge namene, na primer za študije roka uporabnosti.

General Information

• Status: Published
• Publication Date: 19-Sep-2017
• Withdrawal Date: 30-Mar-2018
• ICS: 01.040.11 - Health care technology (Vocabularies)
• ICS: 11.040.70 - Ophthalmic equipment
• Technical Committee: CEN/TC 170 - Ophthalmic optics
• Drafting Committee: CEN/TC 170 - Ophthalmic optics
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 20-Sep-2017
• Completion Date: 20-Sep-2017
• Ref Project: SIST EN ISO 18369-2:2017 - Ophthalmic optics - Contact lenses - Part 2: Tolerances (ISO 18369-2:2017)

Relations

• Replaces: EN ISO 18369-2:2012 - Ophthalmic optics - Contact lenses - Part 2: Tolerances (ISO 18369-2:2012)
• Effective Date: 27-Sep-2017

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 18369-2:2017
01-november-2017
1DGRPHãþD
SIST EN ISO 18369-2:2013
2þHVQDRSWLND.RQWDNWQHOHþHGHO7ROHUDQFH,62
Ophthalmic optics - Contact lenses - Part 2: Tolerances (ISO 18369-2:2017)
Augenoptik - Kontaktlinsen - Teil 2: Grenzabweichungen (ISO 18369-2:2017)
Optique ophtalmique - Lentilles de contact - Partie 2: Tolérances (ISO 18369-2:2017)
Ta slovenski standard je istoveten z: EN ISO 18369-2:2017
ICS:
11.040.70 Oftalmološka oprema Ophthalmic equipment
SIST EN ISO 18369-2:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 18369-2:2017

---------------------- Page: 2 ----------------------

SIST EN ISO 18369-2:2017


EN ISO 18369-2
EUROPEAN STANDARD

NORME EUROPÉENNE

September 2017
EUROPÄISCHE NORM
ICS 01.040.11; 11.040.70 Supersedes EN ISO 18369-2:2012
English Version

Ophthalmic optics - Contact lenses - Part 2: Tolerances
(ISO 18369-2:2017)
Optique ophtalmique - Lentilles de contact - Partie 2: Augenoptik - Kontaktlinsen - Teil 2:
Tolérances (ISO 18369-2:2017) Grenzabweichungen (ISO 18369-2:2017)
This European Standard was approved by CEN on 1 July 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 18369-2:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 18369-2:2017
EN ISO 18369-2:2017 (E)
Contents Page
European foreword . 3
2

---------------------- Page: 4 ----------------------

SIST EN ISO 18369-2:2017
EN ISO 18369-2:2017 (E)
European foreword
This document (EN ISO 18369-2:2017) has been prepared by Technical Committee ISO/TC 172 “Optics
and photonics” in collaboration with Technical Committee CEN/TC 170 “Ophthalmic optics” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2018, and conflicting national standards shall
be withdrawn at the latest by March 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 18369-2:2012.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 18369-2:2017 has been approved by CEN as EN ISO 18369-2:2017 without any
modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 18369-2:2017

---------------------- Page: 6 ----------------------

SIST EN ISO 18369-2:2017
INTERNATIONAL ISO
STANDARD 18369-2
Third edition
2017-08
Ophthalmic optics — Contact lenses —
Part 2:
Tolerances
Optique ophtalmique — Lentilles de contact —
Partie 2: Tolérances
Reference number
ISO 18369-2:2017(E)
©
ISO 2017

---------------------- Page: 7 ----------------------

SIST EN ISO 18
...