FprEN 14188-2

Joint fillers and sealants - Part 2: Specifications for cold applied sealants

This European Standard specifies the requirements for cold applied normal and fuel resistant joint sealants for concrete pavements to be used in roads, bridges, fuel stations, airfields and other trafficked areas.

Fugeneinlagen und Fugenmassen - Teil 2: Anforderungen an kalt verarbeitbare Fugenmassen

Diese europäische Norm legt die Anforderungen an normale und treibstoffbeständige Fugenmassen für Kaltanwendung in Betondecken fest, die bei Straßen, Brücken, Tankstellen, Flugplätzen und sonstigen Verkehrsflächen zu verwenden sind.

Produits d'obturation et de scellement de joints - Partie 2: Spécifications pour produits de scellement appliqués à froid

La présente Norme européenne spécifie les exigences liées aux produits de scellement de joints appliqués à froid courants ou résistant aux hydrocarbures pour chaussées en béton utilisés sur les routes, ponts, stations-service, terrains d'aviation et autres zones soumises au trafic.

Polnilne in tesnilne mase za stike - 2. del: Specifikacije za tesnilne mase, ki se vgrajujejo po hladnem postopku

General Information

• Status: Not Published
• ICS: 93.080.20 - Road construction materials
• Technical Committee: CEN/TC 227 - Road materials
• Drafting Committee: CEN/TC 227/WG 3 - Materials for concrete roads including joint fillers and sealants
• Current Stage: 5098 - Decision to abandon - Formal Approval
• Completion Date: 26-Mar-2021
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Mandate: M/124 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on road construction products
• Ref Project: kSIST prEN 14188-2:2017 - Joint fillers and sealants - Part 2: Specifications for cold applied sealants

Relations

• Revised: EN 14188-2:2004 - Joint fillers and sealants - Part 2: Specifications for cold applied sealants
• Effective Date: 11-Dec-2010

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 14188-2:2014
01-december-2014
Polnilne in tesnilne mase za stike - 2. del: Specifikacije za tesnilne mase, ki se
vgrajujejo po hladnem postopku
Joint fillers and sealants - Part 2: Specifications for cold applied sealants
Fugeneinlagen und Fugenmassen - Teil 2: Anforderungen an kalt verarbeitbare
Fugenmassen
Produits d'obturation et de scellements de joints - Partie 2: Spécifications pour produits
de scellement appliqués à froid
Ta slovenski standard je istoveten z: prEN 14188-2
ICS:
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
93.080.20 Materiali za gradnjo cest Road construction materials
oSIST prEN 14188-2:2014 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 14188-2:2014

---------------------- Page: 2 ----------------------
oSIST prEN 14188-2:2014

EUROPEAN STANDARD
DRAFT
prEN 14188-2
NORME EUROPÉENNE

EUROPÄISCHE NORM

October 2014
ICS 93.080.20 Will supersede EN 14188-2:2004
English Version
Joint fillers and sealants - Part 2: Specifications for cold applied
sealants
Produits d'obturation et de scellements de joints - Partie 2: Fugeneinlagen und Fugenmassen - Teil 2: Anforderungen
Spécifications pour produits de scellement appliqués à froid an kalt verarbeitbare Fugenmassen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 227.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 14188-2:2014 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 14188-2:2014
prEN 14188-2:2014 (E)
Contents
Page
Foreword .3
1 Scope .4
2 Normative references .4
3 Terms and definitions .5
4 Classification and specification .5
5 Requirements .6
6 Assessment and verification of constancy of performance (AVCP) . 12
7 Marking, labelling and packaging . 13
Annex A (normative) Product type determination and frequencies of testing for Factory
Production Control . 15
Annex B (informative) Example of a product data sheet . 16
Annex C (informative) Processing information for installation of cold applied joint sealants .
...