EN 13599:2014

Copper and copper alloys - Copper plate, sheet and strip for electrical purposes

This European Standard specifies the composition, property requirements including electrical properties, and tolerances on dimensions and form for copper plate, sheet and strip for electrical purposes with thicknesses from 0,05 mm up to and including 25 mm and widths from 10 mm up to and including 1 250 mm.
The sampling procedures and the methods of test for verification of conformity to the requirements of this European Standard are also specified.

Kupfer und Kupferlegierungen - Platten, Bleche und Bänder aus Kupfer für die Anwendung in der Elektrotechnik

Diese Europäische Norm legt die Zusammensetzung, die Anforderungen an die Eigenschaften, einschließlich elektrischer Eigenschaften, Grenzabmaße und Formtoleranzen von Platten, Blechen und Bändern aus Kupfer mit Dicken von 0,05 mm bis 25 mm und Breiten von 10 mm bis 1 250 mm für die Elektrotechnik fest.
Der Ablauf der Probenentnahme und die Prüfverfahren zur Feststellung der Übereinstimmung mit den Anforderungen dieser Europäischen Norm sind ebenfalls festgelegt.

Cuivre et alliages de cuivre - Plaques, tôles et bandes en cuivre pour usages électriques

La présente Norme européenne spécifie la composition, les caractéristiques, y compris les caractéristiques électriques et les tolérances de dimensions et de formes des plaques, tôles et bandes en cuivre pour usages électriques avec des épaisseurs comprises entre 0,05 mm et 25 mm inclus et des largeurs comprises entre 10 mm et 1 250 mm inclus.
Les procédures d'échantillonnage et les méthodes d'essai pour la vérification de la conformité aux exigences de la présente Norme européenne sont également spécifiées.

Baker in bakrove zlitine - Bakrove plošče, pločevina in trakovi za uporabo v elektrotehniki

Ta evropski standard določa sestavo, zahteve glede značilnosti, vključno z električnimi lastnostmi, in odstopanja glede dimenzij ter oblik za bakrene plošče in trakove za električno uporabo z debelino od 0,05 mm do vključno 25 mm ter širino od 10 mm do vključno 1250 mm. Določeni so tudi postopki vzorčenja in preskusne metode za preverjanje skladnosti s tem evropskim standardom.

General Information

• Status: Published
• Publication Date: 07-Jan-2014
• Withdrawal Date: 30-Jul-2014
• ICS: 77.150.30 - Copper products
• Technical Committee: CEN/TC 133 - Copper and copper alloys
• Drafting Committee: CEN/TC 133/WG 2 - Rolled flat products
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 05-Sep-2019
• Ref Project: SIST EN 13599:2014 - Copper and copper alloys - Copper plate, sheet and strip for electrical purposes

Relations

• Replaces: EN 13599:2002 - Copper and copper alloys - Copper plate, sheet and strip for electrical purposes
• Effective Date: 15-Jan-2014

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.HOHNWURWHKQLNLKupfer und Kupferlegierungen - Platten, Bleche und Bänder aus Kupfer für die Anwendung in der ElektrotechnikCuivre et alliages de cuivre - Plaques, tôles et bandes en cuivre pour usages électriquesCopper and copper alloys - Copper plate, sheet and strip for electrical purposes77.150.30Bakreni izdelkiCopper productsICS:Ta slovenski standard je istoveten z:EN 13599:2014SIST EN 13599:2014en,fr,de01-junij-2014SIST EN 13599:2014SLOVENSKI
STANDARDSIST EN 13599:20041DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13599
January 2014 ICS 77.150.30 Supersedes EN 13599:2002English Version
Copper and copper alloys - Copper plate, sheet and strip for electrical purposes
Cuivre et alliages de cuivre - Plaques, tôles et bandes en cuivre pour usages électriques
Kupfer und Kupferlegierungen - Platten, Bleche und Bänder aus Kupfer für die Anwendung in der Elektrotechnik This European Standard was approved by CEN on 3 November 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13599:2014 ESIST EN 13599:2014

Characteristics of coppers for electrical purposes . 19 A.1 General grouping of copper types . 19 A.2 General characteristics . 19 A.3 Particular characteristics . 19 Bibliography . 21
mandatory hardness requirements; R… Material condition designated by the minimum value of tensile strength requirement for the product
with mandatory tensile strength and elongation requirements. NOTE Some R. material conditions in this European Standard apply to products which also have mandatory 0,2 % proof strength requirements. Exact conversion between material conditions designated H. and R. is not possible. Material condition is designated by only one of the above designations. 4.3 Product The product designation provides a standardised pattern of designation from which a rapid and unequivocal description of a
...