EN ISO 1140:2012
(Main)Fibre ropes - Polyamide - 3-, 4-, 8- and 12-strand ropes (ISO 1140:2012)
Fibre ropes - Polyamide - 3-, 4-, 8- and 12-strand ropes (ISO 1140:2012)
ISO 1140:2012 specifies requirements for 3-strand hawser-laid and 4-strand shroud-laid ropes, 8-strand braided ropes and 12-strand braided ropes for general service made of polyamide and gives rules for their designation.
Faserseile - Polyamid - 3-, 4-, 8- und 12-litzige Seile (ISO 1140:2012)
Diese Internationale Norm legt Anforderungen an 3-litzige und 4-litzige Seile in Trossenschlag sowie an 8 litzige geflochtene Seile und 12 litzige geflochtene Seile aus Polyamid für allgemeine Verwendung und die Regeln für ihre Bezeichnung fest.
Cordages en fibres - Polyamide - Cordages à 3, 4, 8 et 12 torons (ISO 1140:2012)
L'ISO 1140:2012 spécifie les exigences relatives aux cordages câblés à 3 torons et à 4 torons, ainsi qu'aux cordages tressés à 8 torons et à 12 torons, en polyamide, pour usages divers, et précise les règles de leur désignation.
Vlaknene vrvi - Poliamid - 3-, 4-, 8- in 12-pramenske vrvi (ISO 1140:2012)
Ta mednarodni standard določa zahteve za 3-pramenske in 4-pramenske vite vrvi, 8-pramenske pletene vrvi in 12-pramenske pletene vrvi za splošno uporabo, narejene iz poliamida, ter določa pravila za njihovo označevanje.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2012
1DGRPHãþD
SIST EN ISO 1140:2005
Vlaknene vrvi - Poliamid - 3-, 4-, 8- in 12-pramenske vrvi (ISO 1140:2012)
Fibre ropes - Polyamide - 3-, 4-, 8- and 12- strand ropes (ISO 1140:2012)
Faserseile - Polyamid - 3-, 4-, 8- und 12-litzige Seile (ISO 1140:2012)
Cordages en fibres - Polyamide - Cordages à 3, 4, 8 et 12 torons (ISO 1140:2012)
Ta slovenski standard je istoveten z: EN ISO 1140:2012
ICS:
59.080.50 Vrvi Ropes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 1140
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2012
ICS 59.080.50 Supersedes EN ISO 1140:2004
English Version
Fibre ropes - Polyamide - 3-, 4-, 8- and 12-strand ropes (ISO
1140:2012)
Cordages en fibres - Polyamide - Cordages à 3, 4, 8 et 12 Faserseile - Polyamid - 3-, 4-, 8- und 12-litzige Seile (ISO
torons (ISO 1140:2012) 1140:2012)
This European Standard was approved by CEN on 11 August 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 1140:2012: E
worldwide for CEN national Members.
Contents Page
Foreword .3
Foreword
This document (EN ISO 1140:2012) has been prepared by Technical Committee ISO/TC 38 "Textiles" in
collaboration with Technical Committee CEN/TC 248 “Textiles and textile products” the secretariat of which is
held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by February 2013, and conflicting national standards shall be withdrawn
at the latest by February 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 1140:2004.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 1140:2012 has been approved by CEN as a EN ISO 1140:2012 without any modification.
INTERNATIONAL ISO
STANDARD 1140
Fourth edition
2012-08-01
Fibre ropes — Polyamide — 3-, 4-, 8- and
12-strand ropes
Cordages en fibres — Polyamide — Cordages à 3, 4, 8 et 12 torons
Reference number
ISO 1140:2012(E)
©
ISO 2012
ISO 1140:2012(E)
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2012 – All rights reserved
ISO 1140:2012(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Designation . 1
5 General requirements . 2
6 Physical properties . 3
7 Marking . 7
ISO 1140:2012(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International
Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 1140 was prepared by Technical Committee ISO/TC 38, Textiles.
This fourth edition cancels and replaces the third edition (ISO 1140:2004), which has been technically revised.
iv © ISO 2012 – All rights reserved
INTERNATIONAL STANDARD ISO 1140:2012(E)
Fibre ropes — Polyamide — 3-, 4-, 8- and 12-strand ropes
1 Scope
This International Standard specifies requirements for 3-strand hawser-laid and 4-strand shroud-laid ropes,
8-strand braided ropes and 12-strand braided ropes for general service made of polyamide, and gives rules
for their designation.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced document
(including any amendments) applies.
ISO 1968, Fibre ropes and cordage — Vocabulary
ISO 2307, Fibre ropes — Determination of certain physical and mechanical properties
ISO 9554, Fibre ropes — General specifications
3 Terms and def
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.