EN ISO 9093-1:2018

Small craft - Seacocks and through-hull fittings - Part 1: Metallic (ISO 9093-1:1994)

Specifies requirements for metallic through-hull fittings, seacocks and hose fittings that specifically form part of water intake and discharge lines, and for wet exhaust outlets used in small craft of up to 24 m length of hull. Applies to seacocks and through-hull fittings with cylindrical pipe threads in accordance with ISO 228-1, and with joints for conical pipe threads in accordance with ISO 7-1 with nominal diameters of 1/4, 3/8, 1/2, 3/4, 1, 1 1/4, 1 1/2, 2, 2 1/2, 3 or 4 in.

Kleine Wasserfahrzeuge - Seeventile und Außenhautdurchführungen - Teil 1: Metallische Teile (ISO 9093-1:1994)

Navires de plaisance - Vannes de coque et passe-coques - Partie 1: Construction métallique (ISO 9093-1:1994)

La présente partie de l'ISO 9093 prescrit les caractéristiques des passe-coques, vannes de coque et raccords métalliques formant partie intégrante des canalisations de prise et de décharge d'eau, ainsi que des sorties d'échappement par voie humide, des navires de plaisance dont la coque ne dépasse pas 24 m de longueur. Elle ne traite pas des passe-coques utilisés à d'autres fins. La présente partie de l'ISO 9093 est applicable aux vannes de coque et aux passe-coques pour tuyaux à filetage cylindrique conformes à l'ISO 228-1, et aux raccords pour tuyaux à filetage conique conformes à l'ISO 7-1, de diamètre nominal 1/4 in, 3/8 in, 1/2 in, 3/4 in, 1 in, 1 1/4 in, 1 1/2 in, 2 in, 2 l/2 in, 3 in ou 4 in.
NOTE 1 L'élaboration de la présente partie de l'ISO 9093 s'explique par la très grande diversité dimensionnelle des éléments des canalisations de prise et de décharge d'eau et des sorties d'échappement par voie humide traversant les coques de navires, diversité qui limite l'interchangeabilité de ces éléments.

Mala plovila - Ventili in fitingi za morsko vodo v trupu plovila - 1. del: Kovinski (ISO 9093-1:1994)

Določa zahteve za kovinske fitinge za morsko vodo v trupu plovila, ventile in cevne fitinge, ki so izrecno del sistema za dovajanje in odvajanje vode, ter za cevi za mokri izpust, ki se uporabljajo v malih plovilih z dolžino trupa do 24 m. Uporablja se za ventile in fitinge za morsko vodo z valjastimi cevnimi navoji v skladu s standardom ISO 228-1 ter s spojkami za stožčaste cevne navoje v skladu s standardom ISO 7-1 z nominalnim premerom 1/4, 3/8, 1/2, 3/4, 1, 1 1/4, 1 1/2, 2, 2 1/2, 3 ali 4 palce.

General Information

• Status: Withdrawn
• Publication Date: 02-Oct-2018
• Withdrawal Date: 26-Jan-2021
• ICS: 47.080 - Small craft
• Technical Committee: CEN/SS T01 - Shipbuilding and maritime structures
• Drafting Committee: CEN/SS T01 - Shipbuilding and maritime structures
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 27-Jan-2021
• Directive: 2003/44/EC - Approximation of the laws, regulations and administrative provisions of the Member States relating to recreational craft
• Directive: 2013/53/EU - Directive 2013/53/EU of the European Parliament and of the Council of 20 November 2013 on recreational craft and personal watercraft and repealing Directive 94/25/EC
• Mandate: M/542 - [C(2015)8736] Standardisation Request to the European Committee for Standardisation and the European Committee for Electro-technical Standardisation as regards recreational craft and personal watercraft in support of Directive 2013/53/EU of the European Parliament and of the Council of 20 November 2013 on recreational craft and personal watercraft and repealing Directive 94/25/EC.
• Ref Project: SIST EN ISO 9093-1:2018 - Small craft - Seacocks and through-hull fittings - Part 1: Metallic (ISO 9093-1:1994)

Relations

• Replaces: EN ISO 9093-1:1997 - Small craft - Seacocks and through-hull fittings - Part 1: Metallic (ISO 9093-1:1994)
• Effective Date: 08-Jun-2022
• Replaced By: EN ISO 9093:2021 - Small craft - Seacocks and through-hull fittings (ISO 9093:2020)
• Effective Date: 03-Jan-2018

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 9093-1:2018
01-december-2018
1DGRPHãþD
SIST EN ISO 9093-1:2000
Mala plovila - Ventili in fitingi za morsko vodo v trupu plovila - 1. del: Kovinski (ISO
9093-1:1994)
Small craft - Seacocks and through-hull fittings - Part 1: Metallic (ISO 9093-1:1994)
Kleine Wasserfahrzeuge - Seeventile und Außenhautdurchführungen - Teil 1:
Metallische Teile (ISO 9093-1:1994)
Petits navires - Vannes de coque et passe-coques - Partie 1 : Construction métallique
(ISO 9093-1:1994)
Ta slovenski standard je istoveten z: EN ISO 9093-1:2018
ICS:
47.020.30 Sistemi cevi Piping systems
47.080 ýROQL Small craft
SIST EN ISO 9093-1:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 9093-1:2018

---------------------- Page: 2 ----------------------

SIST EN ISO 9093-1:2018


EN ISO 9093-1
EUROPEAN STANDARD

NORME EUROPÉENNE

October 2018
EUROPÄISCHE NORM
ICS 47.080 Supersedes EN ISO 9093-1:1997
English Version

Small craft - Seacocks and through-hull fittings - Part 1:
Metallic (ISO 9093-1:1994)
Navires de plaisance - Vannes de coque et passe- Kleine Wasserfahrzeuge - Seeventile und
coques - Partie 1: Construction métallique (ISO 9093- Außenhautdurchführungen - Teil 1: Metallische Teile
1:1994) (ISO 9093-1:1994)
This European Standard was approved by CEN on 16 April 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9093-1:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 9093-1:2018
EN ISO 9093-1:2018 (E)
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of Directive 2013/53/EU aimed to be covered . 4

2

---------------------- Page: 4 ----------------------

SIST EN ISO 9093-1:2018
EN ISO 9093-1:2018 (E)
European foreword
The text of ISO 9093-1:1994 has been prepared by Technical Committee ISO/TC 188 “Small craft” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 9093-1:2018.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2019, and conflicting national standards shall be
withdrawn at the latest by April 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 9093-1:1997.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive 2013/53/EU.
For relationship with EU Directive 2013/53/EU, see informative Annex ZA, which is an integral part of
this document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,
Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, S
...