EN 15273-3:2009

Railway applications - Gauges - Part 3: Structure gauges

This standard:
¾ defines the various profiles needed to install, verify and maintain the various structures near the structure
gauge;
- lists the various phenomena to be taken into account to determine the structure gauge;
- defines a methodology that may be used to calculate the various profiles from these phenomena;
- lists the rules to determine the distance between the track centres;
- lists the rules to be complied with when building the platforms;
- lists the rules to determine the pantograph gauge;
- lists the formulae needed to calculate the structure gauges in the catalogue.

Bahnanwendungen - Begrenzungslinien - Teil 3: Lichtraumprofile

Diese Europäische Norm
- definiert verschiedene Profile, die für die Anordnung, Überprüfung und Instandhaltung gleisnaher
baulicher Anlagen erforderlich sind;
- legt verschiedene Wirkungsgrößen fest, die bei der Festlegung des jeweiligen Lichtraums zu berücksichtigen
sind;
- legt eine Methode fest, mit der  ausgehend von den oben genannten Einflüssen  die verschiedenen
Lichtraumprofile berechnet werden können;
- legt Regeln für die Festlegung des Gleismittenabstandes fest;
- legt Regeln fest, die bei die Anordnung der Bahnsteige zu beachten sind;
- legt Regeln für die Bestimmung des Lichtraums für den Durchgang der Stromabnehmer fest;
- stellt Gleichungen auf, die für die Berechnung der in der Aufstellung aufgeführten Lichträume erforderlich
sind.

Applications ferroviaires - Gabarits - Partie 3: Gabarit des obstacles

La présente norme:
-   Définit les différents profils, nécessaires pour l’implantation, la vérification et le maintien des obstacles qui s’approchent du gabarit des obstacles en vigueur.
-   Donne les différents phénomènes à prendre en compte pour déterminer le gabarit des obstacles en vigueur.
-   Définit une méthodologie qui peut être utilisée pour calculer les différents contours, à partir de ces phénomènes.
-   Donne les règles pour déterminer l'entraxe des voies.
-   Donne les règles à respecter lors de l’implantation des quais.
-   Donne les règles pour déterminer le gabarit du pantographe.
-   Donne les formules nécessaires pour calculer les gabarits des obstacles du catalogue.

Železniške naprave - Profili - 3. del: Svetli profili

Ta standard:
- opredeljuje različne profile, potrebne za namestitev, preverjanje in vzdrževanje različnih struktur v bližini svetlih profilov;
- navaja različne pojave, ki jih je treba upoštevati pri določevanju svetlega profila;
- opredeljuje metodologijo, ki se lahko uporabi za izračun različnih profilov iz teh pojavov;
- navaja pravila za določevanje razdalje med središčema zgornjih ustrojev;
- navaja pravila, ki jih je treba upoštevati pri izgradnji platform;
- navaja pravila za določevanje svetlega profila odjemnika toka;
- navaja formule, potrebne za izračun svetlih profilov v katalogu.

General Information

• Status: Withdrawn
• Publication Date: 22-Dec-2009
• Withdrawal Date: 07-May-2013
• ICS: 45.020 - Railway engineering in general
• ICS: 45.060.01 - Railway rolling stock in general
• Technical Committee: CEN/TC 256 - Railway applications
• Drafting Committee: CEN/TC 256/WG 32 - Vehicle gauge
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 08-May-2013
• Completion Date: 08-May-2013
• Directive: 2001/16/EC - Directive 2001/16/EC of the European Parliament and of the Council of 19 March 2001 on the interoperability of the trans-European conventional rail system
• Directive: 2008/57/EC - Directive 2008/57/EC of the European Parliament and of the Council of 17 June 2008 on the interoperability of the rail system within the Community (Recast)
• Directive: 93/38/EEC - Procurement procedures of entities operating in the water, energy, transport and telecommunications sectors
• Directive: 96/48/EC - Interoperability of the trans-European high-speed rail system
• Mandate: M/024 - Mandate to CEN/CENELEC/ETSI for programming and standardization in the field of railway equipment
• Mandate: M/275 - Mandate to CEN/CENELEC/ETSI for standardization in the field of railway equipment on the interoperability of the Trans-European high-speed rail system
• Mandate: M/334 - Mandate for programming and standardisation addressed to CEN, CENELEC and ETSI in the field of the Interoperability of the trans-european conventional rail system
• Ref Project: SIST EN 15273-3:2010 - Railway applications - Gauges - Part 3: Structure gauges

Relations

• Replaced By: EN 15273-3:2013 - Railway applications - Gauges - Part 3: Structure gauges
• Effective Date: 15-May-2013

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Železniške naprave - Profili - 3. del: Svetli profiliBahnanwendungen - Lichtraum - Teil 3: LichtraumprofileApplications ferroviaires - Gabarits - Partie 3: Gabarit des obstaclesRailway applications - Gauges - Part 3: Structure gauges45.060.01Železniška vozila na splošnoRailway rolling stock in generalICS:Ta slovenski standard je istoveten z:EN 15273-3:2009SIST EN 15273-3:2010en,fr,de01-september-2010SIST EN 15273-3:2010SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15273-3
December 2009 ICS 45.020 English Version
Railway applications - Gauges - Part 3: Structure gauges
Applications ferroviaires - Gabarits - Partie 3: Gabarit des obstacles
Bahnanwendungen - Begrenzungslinien - Teil 3: Lichtraumprofile This European Standard was approved by CEN on 3 October 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15273-3:2009: ESIST EN 15273-3:2010
...