iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 14673:2006/FprA1

(Amendment)

Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals

Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals

Sicherheit von Maschinen - Sicherheitsanforderungen an hydraulisch angetriebene Warm-Freiformschmiedepressen zum Schmieden von Stahl und NE-Metallen

Sécurité des machines - Exigences de sécurité pour les presses à commande hydraulique de forgeage libre pour le formage à chaud de l'acier et des métaux non ferreux

Varnost strojev - Varnostne zahteve za hidravlično gnane stiskalnice prosto kovanih izkovkov za kovanje jekla in neželeznih kovin

General Information

Status
Not Published
ICS
25.120.10 - Forging equipment. Presses. Shears
Technical Committee
CEN/TC 322 - Equipments for making and shaping of metals - Safety requirements
Drafting Committee
CEN/TC 322/WG 5 - Forging and extruding
Current Stage
5060 - Closure of Vote - Formal Approval
Start Date
27-Jan-2010
Completion Date
27-Jan-2010
Directive
2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
98/37/EC - Machinery
Mandate
M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
Ref Project
SIST EN 14673:2007/kFprA1:2009 - Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals

Relations

Merged Into
EN 14673:2006+A1:2010 - Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals
Effective Date
06-Feb-2010
Amends
EN 14673:2006 - Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals
Effective Date
22-Dec-2008

Buy Standard

EN 14673:2007/kFprA1:2009EN 14673:2007/kFprA1:2009
PreviousNext
Draft
EN 14673:2007/kFprA1:2009
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 14673:2007/kFprA1:2009
01-oktober-2009
9DUQRVWVWURMHY9DUQRVWQH]DKWHYH]DKLGUDYOLþQRJQDQHVWLVNDOQLFHSURVWR
NRYDQLKL]NRYNRY]DNRYDQMHMHNODLQQHåHOH]QLKNRYLQ
Safety of machinery - Safety requirements for hydraulically powered open die hot forging
presses for the forging of steel and non-ferrous metals
Sicherheit von Maschinen - Sicherheitsanforderungen an hydraulisch angetriebene
Warm-Freiformschmiedepressen zum Schmieden von Stahl und NE-Metallen
Sécurité des machines - Exigences de sécurité pour les presses à commande
hydraulique de forgeage libre pour le formage à chaud de l'acier et des métaux non
ferreux
Ta slovenski standard je istoveten z: EN 14673:2006/FprA1
ICS:
13.110 Varnost strojev Safety of machinery
25.120.10 Kovaški stroji. Stiskalnice. Forging equipment. Presses.
Škarje Shears
SIST EN 14673:2007/kFprA1:2009 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 14673:2007/kFprA1:2009

---------------------- Page: 2 ----------------------

SIST EN 14673:2007/kFprA1:2009
EUROPEAN STANDARD
FINAL DRAFT
EN 14673:2006
NORME EUROPÉENNE
EUROPÄISCHE NORM
FprA1
August 2009
ICS 25.120.10

English Version
Safety of machinery - Safety requirements for hydraulically
powered open die hot forging presses for the forging of steel
and non-ferrous metals
Sécurité des machines - Exigences de sécurité pour les Sicherheit von Maschinen - Sicherheitsanforderungen an
presses à commande hydraulique de forgeage libre pour le hydraulisch angetriebene Warm-Freiformschmiedepressen
formage à chaud de l'acier et des métaux non ferreux zum Schmieden von Stahl und NE-Metallen
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 322.
This draft amendment A1, if approved, will modify the European Standard EN 14673:2006. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14673:2006/FprA1:2009: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 14673:2007/kFprA1:2009
EN 14673:2006/FprA1:2009 (E)
Contents Page
Foreword .3
1 Modification to the "Foreword" .4
2 Modification to Clause "2 Normative references" .4
3 Modification to "5.1.4 Safety layout" .5
4 Modification to "5.1.6 Railings" .6
5 Modification to "5.1.9 Warning devices and safety signs" .6
6 Modification to "5.1.11 Electrical equipment" .6
7 Modification to "5.1.13 Guards" .7
8 Modification to "5.1.14 Surface temperatures" .7
9 Modifications to "5.1.16 Hydraulic and pneumatic systems" and 5.1.17 Ergonomics" .7
10 Addition of "5.1.18 Vibrations", "5.1.19 Loss of energy" and "5.1.20 Linked equipment" .8
11
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 14656:2006+A1:2010(Main)
Safety of machinery - Safety requirements for extrusion presses for steel and non-ferrous metals
SIST EN 14656:2007+A1:2010

This European Standard applies to:
-   extrusion presses from the exit side of the heater through associated handling, cooling and quenching equipment including, e.g. the puller, the hot saw, the run-out table, the stretcher, the cold saw, cold saw table and/or coiler when incorporated into the equipment, to a point where the extruded product is passed to associated finishing equipment.
It specifies the health and safety requirements at all stages in the life of the equipment, its design, ordering, construction, use and disposal.
This European Standard specifies requirements to be met by the manufacturer to ensure the health and safety of persons during construction, transport, commissioning, operation, maintenance and de-commissioning, as well as in the event of foreseeable faults as malfunctions which may occur in the equipment.
This European Standard deals with all significant hazards, hazardous situations and events relevant to extrusion presses when they are used as intended and under conditions which are reasonably foreseeable by the manufacturer (see Clause 4).
This European Standard is not applicable to extrusion presses which are manufactured before the date of its publication as EN.

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14673:2006+A1:2010(Main)
Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals
SIST EN 14673:2007+A1:2010

This European Standard applies to:
-   hydraulically powered open die forging presses for hot working;
-   handling and cooling equipment connected with the control system of the forging line, e. g., manipulators, rotating type handling devices, die shifting devices, table devices and tool changing devices;
-   handling equipment designed specifically to be used within the forging line, e. g., material manipulation devices, turnover or handling devices attached to fork lift trucks or cranes etc.
It specifies the health and safety requirements at all stages in the life of the equipment, its design, ordering, construction, use and disposal.
This European Standard specifies requirements to be met by the manufacturer to ensure the health and safety of persons during construction, transport, commissioning, operation, maintenance and de-commissioning, as well as in the event of foreseeable faults as malfunctions which may occur in the equipment.
This European Standard deals with all significant hazards, hazardous situations and events relevant to hydraulically powered hot forging presses when they are used as intended and under conditions foreseeable by the manufacturer (see Clause 4).
This European Standard does not cover:
-   hydraulically controlled closed die forging presses for hot working;
-   mechanically powered hot forging presses;
-   mobile manipulators as defined in 3.4.2;
-   standard transport and lifting equipment modified for use with material manipulation devices, turnover and handling devices such as for fork lift trucks and cranes.
This European Standard is not applicable to machinery which was manufactured before the date of publication of this standard by CEN.

  • Standard
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14656:2006/FprA1(Amendment)
Safety of machinery - Safety requirements for extrusion presses for steel and non-ferrous metals
SIST EN 14656:2007/kFprA1:2009

20090129 - Reactivated following delivery of text - MD related case.
2008-10-10 SJ: WI deleted following Alert 2 (Stuck before FV/UAP).

  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16092-3:2018(Main)
Machine tools safety - Presses - Part 3: Safety requirements for hydraulic presses (ISO 16092-3:2017)
SIST EN ISO 16092-3:2018

ISO 16092-3:2017, in addition to ISO 16092‑1, specifies the technical safety requirements and measures to be adopted by persons undertaking the design, manufacture and supply of hydraulic presses which are intended to work cold metal or material partly made up of cold metal.
The presses covered by this document range in size from small high-speed machines with a single operator producing small workpieces to large relatively slow-speed machines with several operators and large complex workpieces.
ISO 16092-3:2017 deals with all significant hazards relevant for hydraulic presses when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). All the phases of the lifetime of the machinery as described in ISO 12100:2010, 5.4 have been taken into consideration.

  • Standard
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16092-1:2018(Main)
Machine tools safety - Presses - Part 1: General safety requirements (ISO 16092-1:2017)
SIST EN ISO 16092-1:2018

ISO 16092-1:2017 specifies technical safety requirements and measures to be adopted by persons undertaking the design, manufacture and supply of presses which are intended to work cold metal or material partly of cold metal, but which can be used in the same way to work other sheet materials (e.g. cardboard, plastic, rubber, leather, etc.).
NOTE 1    The design of a machine includes the study of the machine itself, taking into account all phases of the "life" of the machine mentioned in ISO 12100:2010, 5.4, and the drafting of the instructions related to all the above phases.
The requirements in this document take account of intended use, as defined in ISO 12100:2010, 3.23, as well as reasonably foreseeable misuse, as defined in ISO 12100:2010, 3.24. This document presumes access to the press from all directions, deals with all significant hazards during the various phases of the life of the machine described in Clause 4, and specifies the safety measures for both the operator and other exposed persons.
NOTE 2    All significant hazards means those identified or associated with presses at the time of the publication of this document.
ISO 16092-1:2017 applies to presses which can function independently and can also be used as a guide for the design of presses which are intended to be integrated in a manufacturing system.
The covered presses transmit force mechanically to cut, form, or work cold metal or other sheet materials by means of tools or dies attached to or operated by slides/ram in range in size from small high speed machines with a single operator producing small workpieces to large relatively slow speed machines with several operators and large workpieces.
ISO 16092-1:2017 does not cover machines whose principal designed purpose is:
a)    metal cutting by guillotine;
b)    attaching a fastener, e.g. riveting, stapling or stitching;
c)    bending or folding by press brakes or folding machines;
d)    straightening;
e)    turret punch pressing;
f)     extruding;
g)    drop forging or drop stamping;
h)    compaction of metal powder;
i)     single purpose punching machines designed exclusively for profiles, e.g. used in the construction industry;
j)     spot welding;
k)    tube bending;
l)     working by pneumatic hammer.
This document does not cover hazards related to the use of presses in explosive atmospheres.
ISO 16092-1:2017 covers the safety requirements related to the use of programmable electronic systems (PES) and programmable pneumatic systems (PPS).
ISO 16092-1:2017 is not applicable to presses which are manufactured before the date of its publication.
ISO 16092-1:2017 deals with the common significant hazards, hazardous situations and events relevant to presses and ancillary devices which are intended to work cold metal or material partly of cold metal (see Clause 4). This document defines the common safety requirements for presses defined in this clause and shall be used in connection with other parts of the ISO 16092 series.
Specific hazards which are related to the type presses used are dealt with in ISO 16092‑2, ISO 16092‑3 and ISO 16092‑4.

  • Standard
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16500:2014(Main)
Machines for compacting waste materials or recyclable fractions - Vertical baling presses - Safety requirements
SIST EN 16500:2014

This European Standard specifies the safety requirements for the design, manufacture and information for safe use of vertical baling presses for compacting waste material or recyclable fractions (e. g. paper, plastics, textiles, cans, cardboard, mixed waste), hereafter referred to as materials.
This standard covers vertical baling presses:
-   that are manually or mechanically fed; and
-   with fixed enclosed baling chambers (single or multiple chamber presses); and
-   with a mechanically, hydraulically or pneumatically operated compacting equipment; and
-   where the compacted bale is tied manually in the baling chamber; and
-   with manual unloading or mechanical ejection of the compacted bale.
The scope of this standard includes any mechanical feed equipment, such as belt type conveyors or bin lifts, forming an integral part of the baling press assembly. It also includes integral material flow control equipment.
This standard does not apply to:
-   vertical baling presses without fixed enclosed baling chamber(s); or
-   round balers or roll baling machines; or
-   machines where the compressed material is bagged; or
-   pneumatic conveying systems; or
-   equipment for transporting the balers; or
-   local exhaust ventilation for the removal of dusts or vapours; or
-   hazards arising from any integral pre-conditioning equipment; or
-   hazards arising from the materials being processed (e.g. asbestos, clinical waste, flammable or explosive materials, unhealthy or poisonous waste).
This standard does not apply to cranes, lift trucks or other mobile plant used to load materials into the feed opening. Nor does it apply to hazards arising from loading materials into the feed opening using cranes, lift trucks or other mobile plant.
This standard does not include requirements to meet the specifications of the ATEX Directive 94/9/EC.
All hazards mentioned in Clause 4 are dealt with in this European Standard.
This European Standard is not applicable for vertical baling presses which are manufactured before the date of its publication as an EN.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12622:2009+A1:2013(Main)
Safety of machine tools - Hydraulic press brakes
SIST EN 12622:2010+A1:2014

This European Standard specifies technical safety requirements and protective measures to be adopted by persons undertaking the design, manufacture and supply of hydraulic press brakes which are designed to work cold metal or material partly of metal and hereafter referred to as machines.
This European Standard also covers hydraulic press brakes, whose primary intended use is the cold working of metal, which are to be used in the same way to work other sheet materials such as cardboard or plastic.
The requirements in this European Standard take account of intended use, including foreseeable misuse as defined in 3.22 of EN ISO 12100-1:2003. This European Standard presumes access to the press brake from all directions, deals with the hazards described in Clause 4, and specifies the safety measures for both the operator and other exposed persons.
This European Standard also applies to:
- ancillary devices which are an integral part of the press brake, e.g. back gauges and adjustable front sheet supports;
- machines which are integrated into an automatic production line where the hazards and risk arising are comparable to those of machine working separately.
The requirements of this European Standard apply to all hydraulic press brakes whatever the technology used in their control system, e.g. electromechanical and/ or electronic.
This European Standard does not apply to machines whose principal designed purpose is:
a)   sheet folding by rotary action;
b)   tube and pipe bending by rotary action;
c)   roll bending.
This European Standard applies to machines built after the date of issue of this European Standard.
This European Standard does not cover the safety aspect of automatic loading and unloading equipment.
Some guidance how to take into account additional automatic loading and unloading equipment can be found in ISO 11161.

  • Standard
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16252:2012(Main)
Machines for compacting waste materials or recyclable fractions - Horizontal baling presses - Safety requirements
SIST EN 16252:2013

This European Standard specifies the safety requirements for the design, manufacture and information for safe use of horizontal baling presses for compacting waste material or recyclable fractions (e.g. paper, plastics, textiles, cans, cardboard, mixed waste), hereafter referred to as materials. It covers only machines fed by conveyors or by feed hoppers where the bales are bound manually or automatically. The feed hoppers covered by this European Standard are only fed mechanically or by hand.
The scope of this European Standard includes any mechanical feed equipment, such as belt type loading and feed conveyors or bin lifts, forming an integral part of the baling press assembly. However, pneumatic conveying systems are outside the scope of this European Standard.
This European Standard does not apply to cranes, lift trucks or other mobile plant used to load materials into the feed hopper. Nor does it apply to hazards arising from loading the feed hopper using cranes, lift trucks or other mobile plant.
This European Standard does not apply to pre-conditioning equipment connected at the inlet side of the feed hopper (e.g. sorter, shredder, stand-alone perforator), nor to equipment at the outlet side of the baling press.
This European Standard does not deal with suction and de-dusting mechanisms.
This European Standard does not apply to hazards arising from the materials being processed (e.g. asbestos, clinical waste, aerosol containers).
This European Standard does not cover risks arising from installation of baling presses in places accessible to the public.
All hazards mentioned in Clause 4 are dealt with in this European Standard.
This European Standard is not applicable for horizontal baling presses which are manufactured before the date of its publication as an European Standard.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14656:2006+A1:2010(Main)
Safety of machinery - Safety requirements for extrusion presses for steel and non-ferrous metals
SIST EN 14656:2007+A1:2010

This European Standard applies to:
-   extrusion presses from the exit side of the heater through associated handling, cooling and quenching equipment including, e.g. the puller, the hot saw, the run-out table, the stretcher, the cold saw, cold saw table and/or coiler when incorporated into the equipment, to a point where the extruded product is passed to associated finishing equipment.
It specifies the health and safety requirements at all stages in the life of the equipment, its design, ordering, construction, use and disposal.
This European Standard specifies requirements to be met by the manufacturer to ensure the health and safety of persons during construction, transport, commissioning, operation, maintenance and de-commissioning, as well as in the event of foreseeable faults as malfunctions which may occur in the equipment.
This European Standard deals with all significant hazards, hazardous situations and events relevant to extrusion presses when they are used as intended and under conditions which are reasonably foreseeable by the manufacturer (see Clause 4).
This European Standard is not applicable to extrusion presses which are manufactured before the date of its publication as EN.

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14673:2006+A1:2010(Main)
Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals
SIST EN 14673:2007+A1:2010

This European Standard applies to:
-   hydraulically powered open die forging presses for hot working;
-   handling and cooling equipment connected with the control system of the forging line, e. g., manipulators, rotating type handling devices, die shifting devices, table devices and tool changing devices;
-   handling equipment designed specifically to be used within the forging line, e. g., material manipulation devices, turnover or handling devices attached to fork lift trucks or cranes etc.
It specifies the health and safety requirements at all stages in the life of the equipment, its design, ordering, construction, use and disposal.
This European Standard specifies requirements to be met by the manufacturer to ensure the health and safety of persons during construction, transport, commissioning, operation, maintenance and de-commissioning, as well as in the event of foreseeable faults as malfunctions which may occur in the equipment.
This European Standard deals with all significant hazards, hazardous situations and events relevant to hydraulically powered hot forging presses when they are used as intended and under conditions foreseeable by the manufacturer (see Clause 4).
This European Standard does not cover:
-   hydraulically controlled closed die forging presses for hot working;
-   mechanically powered hot forging presses;
-   mobile manipulators as defined in 3.4.2;
-   standard transport and lifting equipment modified for use with material manipulation devices, turnover and handling devices such as for fork lift trucks and cranes.
This European Standard is not applicable to machinery which was manufactured before the date of publication of this standard by CEN.

  • Standard
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day