Small craft - Electrical systems - Alternating current installations (ISO 13297:2014)

ISO 13297:2014 specifies the requirements for the design, construction and installation of low-voltage alternating current electrical systems which operate at nominal voltages of less than 250 V single phase on small craft of hull length up to 24 m.
Additional information to be included in the owner's manual is listed.

Kleine Wasserfahrzeuge - Elektrische Systeme - Wechselstromanlagen (ISO 13297:2014)

Petits navires - Systèmes électriques - Installations à courant alternatif (ISO 13297:2014)

L'ISO 13297:2014 définit les exigences concernant la conception, la construction et l'installation des circuits électriques à courant alternatif à basse tension fonctionnant sous des tensions nominales inférieures à 250 V en monophasé sur les petits navires de longueur de coque inférieure ou égale à 24 m.
Elle spécifie également les instructions supplémentaires à inclure dans le manuel du propriétaire.

Mala plovila - Električni sistemi - Inštalacije za izmenični tok (ISO 13297:2014)

ISO 13297:2014 določa zahteve za načrtovanje, konstrukcijo in inštalacijo nizkonapetostnih električnih sistemov z izmeničnim tokom, ki delujejo pri nazivni napetosti manj kot 250 V pri eni fazi, na malih plovilih z dolžino trupa do 24 m.
Dodatne informacije, ki jih je treba vključiti v navodila za uporabo, so navedene v dodatku B.

General Information

Status
Withdrawn
Publication Date
02-Oct-2018
Withdrawal Date
13-Apr-2021
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
14-Apr-2021

Relations

Buy Standard

Standard
EN ISO 13297:2018 - BARVE
English language
35 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 13297:2018 - BARVE
English language
35 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 13297:2018
01-december-2018
1DGRPHãþD
SIST EN ISO 13297:2015
0DODSORYLOD(OHNWULþQLVLVWHPL,QãWDODFLMH]DL]PHQLþQLWRN ,62
Small craft - Electrical systems - Alternating current installations (ISO 13297:2014)
Kleine Wasserfahrzeuge - Elektrische Systeme - Wechselstromanlagen (ISO
13297:2014)
Petits navires - Systèmes électriques - Installations à courant alternatif (ISO 13297:2014)
Ta slovenski standard je istoveten z: EN ISO 13297:2018
ICS:
47.020.60 (OHNWULþQDRSUHPDODGLMLQ Electrical equipment of ships
NRQVWUXNFLMQDPRUMX and of marine structures
47.080 ýROQL Small craft
SIST EN ISO 13297:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 13297:2018

---------------------- Page: 2 ----------------------

SIST EN ISO 13297:2018


EN ISO 13297
EUROPEAN STANDARD

NORME EUROPÉENNE

October 2018
EUROPÄISCHE NORM
ICS 47.080 Supersedes EN ISO 13297:2014
English Version

Small craft - Electrical systems - Alternating current
installations (ISO 13297:2014)
Petits navires - Systèmes électriques - Installations à Kleine Wasserfahrzeuge - Elektrische Systeme -
courant alternatif (ISO 13297:2014) Wechselstromanlagen (ISO 13297:2014)
This European Standard was approved by CEN on 16 April 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13297:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 13297:2018
EN ISO 13297:2018 (E)
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of Directive 2013/53/EU aimed to be covered . 4

2

---------------------- Page: 4 ----------------------

SIST EN ISO 13297:2018
EN ISO 13297:2018 (E)
European foreword
The text of ISO 13297:2014 has been prepared by Technical Committee ISO/TC 188 “Small craft” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 13297:2018.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2019, and conflicting national standards shall be
withdrawn at the latest by April 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 13297:2014.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive 2013/53/EU.
For relationship with EU Directive 2013/53/EU, see informative Annex ZA, which is an integral part of
this document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,
Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
the Un
...

SLOVENSKI STANDARD
oSIST prEN ISO 13297:2018
01-februar-2018
0DODSORYLOD(OHNWULþQLVLVWHPL,QãWDODFLMH]DL]PHQLþQLWRN ,62
Small craft - Electrical systems - Alternating current installations (ISO 13297:2014)
Kleine Wasserfahrzeuge - Elektrische Systeme - Wechselstromanlagen (ISO
13297:2014)
Petits navires - Systèmes électriques - Installations à courant alternatif (ISO 13297:2014)
Ta slovenski standard je istoveten z: prEN ISO 13297
ICS:
47.020.60 (OHNWULþQDRSUHPDODGLMLQ Electrical equipment of ships
NRQVWUXNFLMQDPRUMX and of marine structures
47.080 ýROQL Small craft
oSIST prEN ISO 13297:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 13297:2018

---------------------- Page: 2 ----------------------
oSIST prEN ISO 13297:2018


DRAFT
EUROPEAN STANDARD
prEN ISO 13297
NORME EUROPÉENNE

EUROPÄISCHE NORM

December 2017
ICS 47.080 Will supersede EN ISO 13297:2014
English Version

Small craft - Electrical systems - Alternating current
installations (ISO 13297:2014)
Petits navires - Systèmes électriques - Installations à Kleine Wasserfahrzeuge - Elektrische Systeme -
courant alternatif (ISO 13297:2014) Wechselstromanlagen (ISO 13297:2014)
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/SS T01.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN ISO 13297:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN ISO 13297:2018
prEN ISO 13297:2017 (E)
Contents
Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of Directive 2013/53/EU aimed to be covered . 4



2

---------------------- Page: 4 ----------------------
oSIST prEN ISO 13297:2018
prEN ISO 13297:2017 (E)
European foreword
The text of ISO 13297:2014 has been prepared by Technical Committee ISO/TC 188 “Small craft” of the
International Organization for Standardization (ISO) and has been taken over as prEN ISO 13297:2017.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN ISO 13297:2014.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive 2013/53/EU.
For relationship with EU Directive 2013/53/EU, see informative Annex ZA, which is an integral part of
this document.
Endorsement notice
The text of ISO 13297:2014 has been approved by CEN as prEN ISO 13297:2017 without any
modification.
3

---------------------- Page: 5 ----------------------
oSIST prEN ISO 13297:2018
prEN ISO 13297:2017 (E)
Annex ZA
(informative)

Relationship between this European Standard and the Essential
Requirements of Directive 2013/53/EU aimed to be covered
This European standard has been prepared under a Commission’s standardization request M/542
C(2015) 8736 final to provide one voluntary means of conforming to Essential Requirements of Directive
2
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.