EN 13863-3:2004
(Main)Concrete pavements - Part 3: Test methods for the determination of the thickness of a concrete pavement from cores
Concrete pavements - Part 3: Test methods for the determination of the thickness of a concrete pavement from cores
This European Standard describes a method for determining the thickness of a concrete slab by measurements of one or more cores which have been drilled from the full depth of the slab..
Fahrbahnbefestigungen aus Beton - Teil 3: Prüfverfahren zur Dickenbestimmung einer Fahrbahnbefestigung aus Beton aus Bohrkernen
Dieses Dokument beschreibt ein Verfahren zur Dickenbestimmung einer Fahrbahnbefestigung aus Beton durch
Messung von Bohrkernen, die der Gesamtdicke der Fahrbahnbefestigung entnommen worden sind.
Revêtements en béton - Partie 3: Méthodes d'essai pour la détermination de l'épaisseur d'une chaussée béton à partir de carottes
La présente Norme européenne décrit une méthode permettant de déterminer l'épaisseur d'une dalle de béton en mesurant une ou plusieurs carottes extraites sur toute la profondeur de la dalle.
Betonska vozišča - 3. del: Preskusne metode za ugotavljanje debeline betonskega vozišča z odvzemom jeder (vrtin)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-2005
%HWRQVNDYR]LãþDGHO3UHVNXVQHPHWRGH]DXJRWDYOMDQMHGHEHOLQHEHWRQVNHJD
YR]LãþD]RGY]HPRPMHGHUYUWLQ
Concrete pavements - Part 3: Test methods for the determination of the thickness of a
concrete pavement from cores
Fahrbahnbefestigungen aus Beton - Teil 3: Prüfverfahren zur Dickenbestimmung einer
Fahrbahnbefestigung aus Beton aus Bohrkernen
Revetements en béton - Partie 3: Méthodes d'essai pour la détermination de l'épaisseur
d'une chaussée béton a partir de carottes
Ta slovenski standard je istoveten z: EN 13863-3:2004
ICS:
93.080.20 Materiali za gradnjo cest Road construction materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 13863-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2004
ICS 93.080.20
English version
Concrete pavements - Part 3: Test methods for the
determination of the thickness of a concrete pavement from
cores
Revêtements en béton - Partie 3: Méthodes d'essai pour la Fahrbahnbefestigungen aus Beton - Teil 3: Prüfverfahren
détermination de l'épaisseur d'une chaussée béton à partir zur Dickenbestimmung einer Fahrbahnbefestigung aus
de carottes Beton aus Bohrkernen
This European Standard was approved by CEN on 2 September 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13863-3:2004: E
worldwide for CEN national Members.
Contents
Page
Foreword.3
1 Scope .4
2 Normative references .4
3 Apparatus .4
3.1 General.4
3.2 Measuring equipment.4
4 Test specimens.4
5 Procedure .5
6 Results .5
7 Test report .5
Foreword
This document (EN 13863-3:2004) has been prepared by Technical Committee CEN/TC 227 “Road materials”,
the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by May 2005, and conflicting national standards shall be withdrawn at the
latest by May 2005.
This European Standard is one of a series concerned with test methods for the functional requirements for
concrete pavements.
EN 13863-1, Concrete pavements — Part 1: Test method for the determination of the thickness of a concrete
pavement by survey method.
EN 13863-2, Concrete
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.