EN 14188-3:2006

Joint fillers and sealants - Part 3: Specifications for preformed joint seals

This European Standard specifies requirements for preformed joint seals made of vulcanised rubber for concrete pavements.
General requirements for finished joint seals are also given. This European Standard is applicable to joint seals for joints in new concrete pavements and maintenance work in concrete highways.

Fugeneinlagen und Fugenmassen - Teil 3: Anforderungen an elastomere Fugenprofile

Diese Europäische Norm legt Anforderungen an elastomere Fugenprofile aus vulkanisiertem Gummi für
Fahrbahnbefestigungen aus Beton fest.
Allgemeine Anforderungen an fertige Fugenabdichtungen sind auch angegeben. Diese Europäische Norm ist
auf Abdichtungen für Fugen in Fahrbahnbefestigungen aus Beton für den Neubau sowie für die
Instandsetzung von Betonfahrbahnen anwendbar.

Produits de scellement de joints - Partie 3 : Spécifications pour les joints d'étanchéité moulés

Cette norme européenne spécifie les exigences pour les produits d�étanchéité de joints moulés en caoutchouc
vulcanisé pour les chaussées en béton.
Les exigences générales des joints d�étanchéité finis sont également mentionnées. Le présent projet de
norme européenne est applicable aux produits d'étanchéité pour les joints des chaussées en béton dans les
ouvrages neufs et lors de travaux d'entretien des routes en béton.

Polnilne in tesnilne mase za stike – 3. del: Specifikacije za elastomerne tesnilne profile

General Information

• Status: Published
• Publication Date: 17-Jan-2006
• Withdrawal Date: 29-Sep-2007
• ICS: 91.100.50 - Binders. Sealing materials
• Technical Committee: CEN/TC 227 - Road materials
• Drafting Committee: CEN/TC 227/WG 3 - Materials for concrete roads including joint fillers and sealants
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 14-Feb-2022
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/124 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on road construction products
• Ref Project: SIST EN 14188-3:2006 - Joint fillers and sealants - Part 3: Specifications for preformed joint seals

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Polnilne in tesnilne mase za stike – 3. del: Specifikacije za elastomerne tesnilne profileFugeneinlagen und Fugenmassen - Teil 3: Anforderungen an elastomere FugenprofileProduits de scellement de joints - Partie 3 : Spécifications pour les joints d'étanchéité moulésJoint fillers and sealants - Part 3: Specifications for preformed joint seals93.080.20Materiali za gradnjo cestRoad construction materials91.100.50Veziva. Tesnilni materialiBinders. Sealing materialsICS:Ta slovenski standard je istoveten z:EN 14188-3:2006SIST EN 14188-3:2006en01-april-2006SIST EN 14188-3:2006SLOVENSKI
STANDARD



SIST EN 14188-3:2006



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14188-3January 2006ICS 91.100.50 English VersionJoint fillers and sealants - Part 3: Specifications for preformedjoint sealsProduits de scellement de joints - Partie 3 : Spécificationspour les joints d'étanchéité moulésFugeneinlagen und Fugenmassen - Teil 3: Anforderungenan elastomere FugenprofileThis European Standard was approved by CEN on 12 October 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14188-3:2006: ESIST EN 14188-3:2006



EN 14188-3:2006 (E) 2 Contents Page Foreword.4 1 Scope.5 2 Normative references.5 3 Terms and definitions.5 4 Classification.6 5 Requirements.6 5.1 General.6 5.2 Dimensional tolerances.6 5.3 Imperfections and defects.6 5.4 Hardness.7 5.4.1 Hardness.7 5.4.2 Hardness tolerance.7 5.5 Tensile strength and elongation at break.7 5.6 Compression set in air.7 5.6.1 General.7 5.6.2 Compression set at 70 °C.7 5.6.3 Compression set at low temperature (–25 °C).
...