EN 12697-37:2003

Bituminous mixtures - Test methods for hot mix asphalt - Part 37: Hot sand test for the adhesivity of binder on precoated chippings for HRA

This European Standard describes a hot sand test method for determining the condition of the binder on coated chippings for use with hot rolled asphalt (HRA) surface course.

Asphalt - Prüfverfahren für Heißasphalt - Teil 37: Prüfung des Haftvermögens eines Bindemittels auf vorumhülltem Splitt für Hot-Rolled-Asphalt mittels heißem Sand

Diese Norm legt ein Prüfverfahren mit heißem Sand zur Bestimmung des Zustandes eines Bindemittels auf vorumhülltem Splitt für das Aufbringen auf Deckschichten aus Hot-Rolled-Asphalt fest.

Mélanges bitumineux - Méthodes d'essai pour enrobés à chaud - Partie 37: Essai au sable chaud de l'adhésion du liant sur des gravillons pré-enrobés pour HRA (hot rolled asphalt)

La présente Norme européenne décrit une méthode d'essai utilisant du sable chaud pour déterminer l'état d'adhérence du liant sur des gravillons pré-enrobés utilisés sur les surfaces de chaussées en HRA (hot rolled asphalt).

Bitumenske zmesi – Preskusne metode za vroče asfaltne zmesi – 37. del: Preskus sprijemanja veziva s posipom iz drobirja za asfaltiranje z vročim peskom

General Information

• Status: Withdrawn
• Publication Date: 20-May-2003
• Withdrawal Date: 05-Apr-2022
• ICS: 93.080.20 - Road construction materials
• Technical Committee: CEN/TC 227 - Road materials
• Drafting Committee: CEN/TC 227/WG 1 - Bituminous mixtures
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 06-Apr-2022
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/124 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on road construction products
• Ref Project: SIST EN 12697-37:2004 - Bituminous mixtures - Test methods for hot mix asphalt - Part 37: Hot sand test for the adhesivity of binder on precoated chippings for HRA

Relations

• Replaced By: EN 12697-37:2022 - Bituminous mixtures - Test methods - Part 37: Hot sand test for the adhesivity of binder on pre-coated chippings for Hot-Rolled-Asphalt (HRA)
• Effective Date: 02-Sep-2020

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Asphalt - Prüfverfahren für Heißasphalt - Teil 37: Prüfung des Haftvermögens eines Bindemittels auf vorumhülltem Splitt für Hot-Rolled-Asphalt mittels heißem SandMélanges bitumineux - Méthodes d'essai pour enrobés a chaud - Partie 37: Essai au sable chaud de l'adhésion du liant sur des gravillons pré-enrobés pour HRA (hot rolled asphalt)Bituminous mixtures - Test methods for hot mix asphalt - Part 37: Hot sand test for the adhesivity of binder on precoated chippings for HRA93.080.20Materiali za gradnjo cestRoad construction materialsICS:Ta slovenski standard je istoveten z:EN 12697-37:2003SIST EN 12697-37:2004en01-junij-2004SIST EN 12697-37:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12697-37May 2003ICS 93.080.20English versionBituminous mixtures - Test methods for hot mix asphalt - Part37: Hot sand test for the adhesivity of binder on precoatedchippings for HRAMélanges bitumineux - Méthodes d'essai pour enrobés àchaud - Partie 37: Essai au sable chaud de l'adhésion duliant sur des gravillons pré-enrobés pour HRA (hot rolledasphalt)Asphalt - Prüfverfahren für Heißasphalt - Teil 37: Prüfungdes Haftvermögens eines Bindemittels auf vorumhülltemSplitt für Hot-Rolled-Asphalt mittels heißem SandThis European Standard was approved by CEN on 17 March 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12697-37:2003 ESIST EN 12697-37:2004

referencedensity.EN 12697-10, Bituminous mixtures — Test methods for hot mix asphalt — Part 10: Compactability.prEN 12697-11, Bituminous mixtures — Test methods for hot mix asphalt — Part 11: Determination of thecompatibility between aggregate and bitumen.prEN 12697-12, Bituminous mixtures — Test methods for hot mix asphalt — Part 12: Determination of the watersensitivity of bituminous specimens.EN 12697-13, Bituminous mixtures — Test methods for hot mix asphalt — Part 13: Temperature measurement.EN 12697-14, Bituminous mixtures — Test methods for hot mix asphalt — Part 14: Water content.EN 12697-15, Bituminous mixtures — Test methods for hot mix asphalt — Part 15: Determination of thesegregation sensitivity.prEN 12697-16, Bituminous mixtures — Test methods for hot mix asphalt — Part 16: Abrasion by studded tyres.SIST EN 12697-37:2004

from porousasphalt.prEN 12697-19, Bituminous mixtures — Test methods for hot mix asphalt — Part 19: Permeability of specimen.prEN 12697-20, Bituminous mixtures — Test methods for hot mix asphalt — Part 20: Indentation using cube ormarshall specimen.prEN 12697-21, Bituminous mixtures — Test methods for hot mix asphalt — Part 21: Indentation using platespecimens.prEN 12697-22, Bituminous mixtures — Test methods for hot mix asphalt — Part 22: Wheel tracking.prEN 12697-23, Bituminous mixtures — Test methods for hot mix asphalt — Part 23: Determination of the indirecttensile strength of bituminous specimens.prEN 12697-24, Bituminous mixtures — Test methods for hot mix asphalt — Part 24: Resistance to fatigue.prEN 12697-25, Bituminous mixtures — Test methods for hot mix asphalt — Part 25: Cyclic compression test.prEN 12697-26, Bituminous mixtures — Test methods for hot mix asphalt — Part 26: Stiffness.EN 12697-27, Bituminous mixtures — Test methods for hot mix asphalt — Part 27: Sampling.EN 12697-28, Bituminous mixtures — Test methods for hot mix asphalt — Part 28: Preparation of samples fordetermining binder content, water content and grading.EN 12697-29, Bituminous mixtures — Test methods for hot mix asphalt — Part 29: Determination of thedimensions of a bituminous specimen.prEN 12697-30, Bituminous mixtures — Test methods for hot mix asphalt — Part 30: Specimen preparation, impactcompactor.prEN 12697-31, Bituminous mixtures — Test methods for hot mix asphalt — Part 31: Specimen preparation,gyratory compactor.EN 12697-32, Bituminous mixtures — Test methods for hot mix asphalt — Part 32: Laboratory compaction ofbituminous mixtures by a vibratory compactor.prEN 12697-33, Bituminous mixtures — Test methods for hot mix asphalt — Part 33: Specimen preparation, slabcompactor.prEN 12697-34, Bituminous mixtures — Test methods for hot mix asphalt — Part 34: Marshall test.prEN 12697-35, Bituminous mixtures — Test methods for hot mix asphalt — Part 35: Laboratory mixing.EN 12697-36, Bituminous mixtures — Test methods for hot mix asphalt — Part 36: Determination of the thicknessof a bituminous pavement.EN 12697-37, Bituminous mixtures — Test methods for hot mix asphalt — Part 37: Hot sand test for the adhesivityof binder on precoated chippings for HRA.prEN 12697-38, Bituminous mixtures
— Test methods for hot mix asphalt — Part 38: Test equipment andcalibration.prEN 12697-45, Bituminous mixtures – Test methods for hot mix asphalt – Part 45: Binder drainage – Schellenbergmethod.The applicability of this European Standard is described in prEN 13108-4.SIST EN 12697-37:2004
...