Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels

This document specifies technical delivery conditions for flat and long products of hot rolled weldable fine grain structural steels in the thermomechanical rolled condition in the grades and qualities given in Tables 1 to 3 (chemical composition) and Tables 4 to 6 (mechanical properties) in thickness ≤ 150 mm.
The steels specified in this document are especially intended for use in heavily loaded parts of welded structures such as, bridges, flood gates, storage tanks, water supply tanks, etc., for service at ambient and low temperatures.

Warmgewalzte Erzeugnisse aus Baustählen - Teil 4: Technische Lieferbedingungen für thermomechanisch gewalzte schweißgeeignete Feinkornbaustähle

Produits laminés à chaud en aciers de construction - Partie 4 : Conditions techniques de livraison pour les aciers de construction soudable à grains fins obtenus par laminage thermomécanique

Vroče valjani izdelki iz konstrukcijskih jekel - 4. del: Tehnični dobavni pogoji za termomehansko obdelana valjana variva drobnozrnata konstrukcijska jekla - Dopolnilo A1

General Information

Status
Not Published
Publication Date
21-Feb-2023
Current Stage
4060 - Closure of enquiry - Enquiry
Start Date
30-Jun-2022
Due Date
02-Dec-2022
Completion Date
30-Jun-2022

Relations

Buy Standard

Draft
EN 10025-4:2019/oprA1:2022
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-junij-2022
Vroče valjani izdelki iz konstrukcijskih jekel - 4. del: Tehnični dobavni pogoji za
termomehansko obdelana valjana variva drobnozrnata konstrukcijska jekla -
Dopolnilo A1
Hot rolled products of structural steels - Part 4: Technical delivery conditions for
thermomechanical rolled weldable fine grain structural steels
Warmgewalzte Erzeugnisse aus Baustählen - Teil 4: Technische Lieferbedingungen für
thermomechanisch gewalzte schweißgeeignete Feinkornbaustähle
Produits laminés à chaud en aciers de construction - Partie 4 : Conditions techniques de
livraison pour les aciers de construction soudable à grains fins obtenus par laminage
thermomécanique
Ta slovenski standard je istoveten z: EN 10025-4:2019/prA1
ICS:
77.140.10 Jekla za toplotno obdelavo Heat-treatable steels
77.140.50 Ploščati jekleni izdelki in Flat steel products and semi-
polizdelki products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
EN 10025-4:2019
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
April 2022
ICS 77.140.10; 77.140.50
English Version
Hot rolled products of structural steels - Part 4: Technical
delivery conditions for thermomechanical rolled weldable
fine grain structural steels
Produits laminés à chaud en aciers de construction - Warmgewalzte Erzeugnisse aus Baustählen - Teil 4:
Partie 4 : Conditions techniques de livraison pour les Technische Lieferbedingungen für thermomechanisch
aciers de construction soudable à grains fins obtenus gewalzte schweißgeeignete Feinkornbaustähle
par laminage thermomécanique
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC
459/SC 3.
This draft amendment A1, if approved, will modify the European Standard EN 10025-4:2019. If this draft becomes an
amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
inclusion of this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.