Aerospace series - Rivets, solid, 100° countersunk normal head with dome, in corrosion resisting steel FE-PA2601, passivated, inch based series

This standard specifies the characteristics of solid rivets, with 100° countersunk normal head with dome, in corrosion resisting steel FE-PA2601, passivated, inch based series, for maximum operating temperature 750 °C.

Luft- und Raumfahrt - Vollniete, mit 100° normalem Senkkopf mit Dom, aus korrosionsbeständigem Stahl FE-PA PA2601, passiviert, Inch-Reihe

Diese Norm legt die Eigenschaften von Vollnieten, mit 100° normalem Senkkopf mit Dom, aus korrosionsbeständigem Stahl FE-PA2601, passiviert, Inch-Reihe, zur Verwendung bei Temperaturen bis 750 °C, fest.

Série aérospatiale - Rivets ordinaires, à tête fraisée 100° normale avec dôme, en acier résistant à la corrosion FE-PA2601, passivés, série base inches

La présente norme spécifie les caractéristiques des rivets ordinaires, à tête fraisée 100° normale avec dôme, en acier résistant à la corrosion FE-PA2601, passivés, série base inches, pour température maximale d'utilisation 750 °C.

Aerospace series - Rivets, solid, 100-countersunk normal head with dome, in corrosion resisting steel FE-PA2601, passivated, inch based series

General Information

Status
Published
Publication Date
19-Jun-2001
Technical Committee
Drafting Committee
Current Stage
9093 - Decision to confirm - Review Enquiry

Buy Standard

Standard
EN 3138:2002
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Rivets, solid, 100-countersunk normal head with dome, in corrosion resisting steel FE-PA2601, passivated, inch based seriesLuft- und Raumfahrt - Vollniete, mit 100° normalem Senkkopf mit Dom, aus korrosionsbeständigem Stahl FE-PA PA2601, passiviert, Inch-ReiheSérie aérospatiale - Rivets ordinaires, a tete fraisée 100° normale avec dôme, en acier résistant a la corrosion FE-PA2601, passivés, série base inchesAerospace series - Rivets, solid, 100° countersunk normal head with dome, in corrosion resisting steel FE-PA2601, passivated, inch based series49.030.60KoviceRivetsICS:Ta slovenski standard je istoveten z:EN 3138:2001SIST EN 3138:2002en01-januar-2002SIST EN 3138:2002SLOVENSKI

STANDARD
SIST EN 3138:2002

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 3138June 2001ICS 49.030.60English versionAerospace series - Rivets, solid, 100° countersunk normal headwith dome, in corrosion resisting steel FE-PA2601, passivated,inch based seriesSérie aérospatiale - Rivets ordinaires, à tête fraisée 100°normale avec dôme, en acier résistant à la corrosion FE-PA2601, passivés, série base inchesLuft- und Raumfahrt - Vollniete, mit 100° normalemSenkkopf mit Dom, aus korrosionsbeständigem Stahl FE-PA2601, passiviert, Zoll-ReiheThis European Standard was approved by CEN on 28 February 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36

B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 3138:2001 ESIST EN 3138:2002

Page 2EN 3138:2001ForewordThis European Standard has been prepared by the European Association of Aerospace Manufacturers(AECMA).After inquiries and votes carried out in accordance with the rules of this Association, this Standard hasreceived the approval of the National Associations and the Official Services of the member countries ofAECMA, prior to its presentation to CEN.This European Standard shall be given the status of a national standard, either by publication of an identicaltext or by endorsement, at the latest by December 2001, and conflicting national standards shall bewithdrawn at the latest by December 2001.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark,Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal,Spain, Sweden, Switzerland and the United Kingdom.SIST EN 3138:2002

Page 3EN 3138:20011ScopeThis standard specifies the characteristics of solid rivets, with 100° countersunk normal head with dome, incorrosion resisting steel FE-PA2601, passivated, inch based series, for maximum operating temperature 750 °C.2Normative referencesThis European Standard incorporates by dated or undated reference provisions from other publications.These normative references are cited at the appropriate places in the text and the publications are listedhereafter. For dated referen

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.