EN 1301-2:2008

Aluminium and aluminium alloys - Drawn wire - Part 2: Mechanical properties

This document specifies the mechanical properties of aluminium and aluminium alloy drawn wires for general engineering applications (except aeronautical rivets).
It applies to drawn wires, except for electrical or welding purposes.
It does not apply to drawing stock.
The designation of aluminium and aluminium alloys, their chemical composition and the temper designations used in this standard are in accordance with EN 573- 3 and EN 515 respectively.

Aluminium und Aluminiumlegierungen - Gezogene Drähte - Teil 2: Mechanische Eigenschaften

Dieses Dokument legt die mechanischen Eigenschaften für gezogene Drähte aus Aluminium und Aluminiumlegierungen
für allgemeine Anwendungen fest (ausgenommen sind die Niete für die Luftfahrt).
Es gilt für gezogene Drähte, ausgenommen Drähte für elektrotechnische oder schweißtechnische Anwendungen.
Es gilt nicht für Vordraht.
Die in dieser Norm verwendeten Bezeichnungen von Aluminium und Aluminiumlegierungen, die chemische
Zusammensetzung und die Bezeichnungen der Werkstoffzustände entsprechen EN 573-3 bzw. EN 515.

Aluminium et alliages d'aluminium - Fil étiré - Partie 2: Caractéristiques mécaniques

Ce document spécifie les caractéristiques mécaniques du fil étiré en aluminium ou en alliages d'aluminium
destiné à des applications mécaniques (à l'exception des rivets utilisés en aéronautique).
Il s'applique aux fils étirés, à l’exception des applications en électricité ou en soudage.
Il ne s’applique pas aux fils machine.
La désignation de l’aluminium et des alliages d’aluminium, leur composition chimique ainsi que la désignation
des états métallurgiques utilisés dans cette partie de norme sont conformes aux normes EN 573-3 et EN 515,
respectivement.

Aluminij in aluminijeve zlitine - Vlečena žica - 2. del: Mehanske lastnosti

General Information

• Status: Published
• Publication Date: 16-Sep-2008
• ICS: 77.150.10 - Aluminium products
• Technical Committee: CEN/TC 132 - Aluminium and aluminium alloys
• Drafting Committee: CEN/TC 132/WG 4 - Wires and drawing stock
• Current Stage: 9020 - Submission to 2 Year Review Enquiry - Review Enquiry
• Start Date: 15-Jul-2024
• Completion Date: 15-Jul-2024
• Ref Project: SIST EN 1301-2:2008 - Aluminium and aluminium alloys — Drawn wire — Part 2: Mechanical properties

Relations

• Replaces: EN 1301-2:1997 - Aluminium and aluminium alloys - Drawn wire - Part 2: Mechanical properties
• Effective Date: 22-Dec-2008
• Replaces: EN 1301-2:1997/AC:1998 - Aluminium and aluminium alloys - Drawn wire - Part 2: Mechanical properties
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aluminium und Aluminiumlegierungen - Gezogene Drähte - Teil 2: Mechanische EigenschaftenAluminium et alliages d'aluminium — Fil étiré — Partie 2 : Caractéristiques mécaniquesAluminium and aluminium alloys — Drawn wire — Part 2: Mechanical properties77.150.10Aluminijski izdelkiAluminium productsICS:Ta slovenski standard je istoveten z:EN 1301-2:2008SIST EN 1301-2:2008en,fr,de01-november-2008SIST EN 1301-2:2008SLOVENSKI
STANDARDSIST EN 1301-2:1998/AC:2004SIST EN 1301-2:19981DGRPHãþD

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1301-2September 2008ICS 77.150.10Supersedes EN 1301-2:1997
English VersionAluminium and aluminium alloys - Drawn wire - Part 2:Mechanical propertiesAluminium et alliages d'aluminium - Fil étiré - Partie 2:Caractéristiques mécaniquesAluminium und Aluminiumlegierungen - Gezogene Drähte -Teil 2: Mechanische EigenschaftenThis European Standard was approved by CEN on 16 August 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1301-2:2008: ESIST EN 1301-2:2008

Rules for rounding.11 Bibliography.12
...