EN ISO 13918:2008

Welding - Studs and ceramic ferrules for arc stud welding (ISO 13918:2008)

ISO 13918:2008 specifies requirements for studs and ceramic ferrules for arc stud welding, dimensions, materials, mechanical properties and, when required, conditions of evaluation of conformity.

Schweißen - Bolzen und Keramikringe für das Lichtbogenbolzenschweißen (ISO 13918:2008)

Diese Internationale Norm legt Anforderungen für Bolzen und Keramikringe für das Lichtbogenbolzen¬schweißen fest.
Diese Internationale Norm legt Maße, Werkstoffe, mechanische Eigenschaften und, wenn erforderlich, Bedin-gungen für die Konformitätsbewertung fest.
Tabelle 1 zeigt Bolzentypen und die Kurzzeichen für Bolzen und Keramikringe, die in dieser Internationalen Norm verwendet werden.

Soudage - Goujons et bagues céramiques pour le soudage à l'arc des goujons (ISO 13918:2008)

L'ISO 13918:2008 spécifie ce qui suit:
les exigences relatives aux goujons et aux bagues en céramique dans le cadre du soudage des goujons;
les dimensions, les matériaux constitutifs et les propriétés mécaniques des goujons.

Varjenje - Čepi in keramični obroči za obločno varjenje čepov (ISO 13918:2008)

General Information

• Status: Withdrawn
• Publication Date: 06-May-2008
• Withdrawal Date: 30-Jan-2018
• ICS: 21.060.10 - Bolts, screws, studs
• ICS: 25.160.10 - Welding processes
• Technical Committee: CEN/TC 121 - Welding
• Drafting Committee: CEN/TC 121/WG 11 - Stud welding
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 31-Jan-2018
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN ISO 13918:2008 - Welding - Studs and ceramic ferrules for arc stud welding (ISO 13918:2008)

Relations

• Replaces: EN ISO 13918:1998 - Welding - Studs and ceramic ferrules for arc stud welding (ISO 13918:1998)
• Effective Date: 22-Dec-2008
• Replaced By: EN ISO 13918:2018 - Welding - Studs and ceramic ferrules for arc stud welding (ISO 13918:2017, Corrected version 2018-05)
• Effective Date: 07-Feb-2018

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 13918:2008
01-september-2008
1DGRPHãþD
SIST EN ISO 13918:1999
9DUMHQMHýHSLLQNHUDPLþQLREURþL]DREORþQRYDUMHQMHþHSRY,62
Welding - Studs and ceramic ferrules for arc stud welding (ISO 13918:2008)
Schweißen - Bolzen und Keramikringe für das Lichtbogenbolzenschweißen (ISO
13918:2008)
Soudage - Goujons et bagues céramiques pour le soudage a l'arc des goujons (ISO
13918:2008)
Ta slovenski standard je istoveten z: EN ISO 13918:2008
ICS:
21.060.10 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
25.160.10 Varilni postopki in varjenje Welding processes
SIST EN ISO 13918:2008 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 13918:2008

---------------------- Page: 2 ----------------------

SIST EN ISO 13918:2008
EUROPEAN STANDARD
EN ISO 13918
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2008
ICS 21.060.10; 25.160.10 Supersedes EN ISO 13918:1998
English Version
Welding - Studs and ceramic ferrules for arc stud welding (ISO
13918:2008)
Soudage - Goujons et bagues céramiques pour le soudage Schweißen - Bolzen und Keramikringe für das
à l'arc des goujons (ISO 13918:2008) Lichtbogenbolzenschweißen (ISO 13918:2008)
This European Standard was approved by CEN on 16 January 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13918:2008: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 13918:2008
EN ISO 13918:2008 (E)
Contents Page
Foreword.3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 13918:2008
EN ISO 13918:2008 (E)
Foreword
This document (EN ISO 13918:2008) has been prepared by Technical Committee ISO/TC 44 "Welding and
allied processes" in collaboration with Technical Committee CEN/TC 121 “Welding” the secretariat of which is
held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by November 2008, and conflicting national standards shall be withdrawn
at the latest by November 2008.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 13918:1998.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 13918:2008 has been approved by CEN as a EN ISO 13918:2008 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 13918:2008

---------------------- Page: 6 ----------------------

SIST EN ISO 13918:2008

INTERNATIONAL ISO
STANDARD 13918
Second edition
2008-02-15

Welding — Studs and ceramic ferrules for
arc stud welding
Soudage — Goujons et bagues céramiques pour le soudage à l'arc des
goujons




Reference number
ISO 13918:2008(E)
©
ISO 2008

---------------------- Page: 7 ----------------------

SIST EN ISO 13918:2008
ISO 13918:2008(E)
PDF disclaimer
This PDF file may contain embedded typefa
...