EN 1036-2:2008

Glass in building - Mirrors from silver-coated float glass for internal use - Part 2: Evaluation of conformity; product standard

This European Standard specifies requirements, the evaluation of conformity and the factory production control of flat mirrors from silver-coated float glass for internal use in buildings.
NOTE   For glass products with electrical wiring or connections for, e.g. alarm or heating purposes, other directives, e.g. Low Voltage Directive, may apply.

Glas im Bauwesen - Spiegel aus silberbeschichtetem Floatglas für den Innenbereich - Teil 2: Konformitätsbewertung; Produktnorm

Diese Europäische Norm legt die Anforderungen an flache Spiegel aus silberbeschichtetem Floatglas zur
Anwendung im Innenbereich sowie die Konformitätsbewertung und die werkseigene Produktionskontrolle von
solchen Spiegeln fest.
ANMERKUNG Für Glaserzeugnisse mit elektrischer Verkabelung oder Anschlüssen, wie z. B. Alarm- oder Heizungsanwendungen,
können andere Richtlinien, z. B. die Niederspannungsrichtlinie, gelten.

Verre dans la construction - Miroirs en glace argentée pour l'intérieur - Partie 2: Evaluation de la conformité; norme de produit

La présente Norme européenne spécifie des exigences relatives à l’évaluation de la conformité et au contrôle de la
production en usine des miroirs plats en glace argentée utilisés à l’intérieur des bâtiments.
NOTE Pour les produits verriers équipés d'un câblage ou de branchements électriques pour les besoins d'alarme ou de
chauffage par exemple, d’autres directives, comme par exemple la Directive "Basses tensions", peuvent s’appliquer.

Steklo v gradbeništvu - Ogledala iz stekla s srebrno prevleko za uporabo v notranjosti stavb - 2. del: Ovrednotenje skladnosti/standard za izdelek

General Information

• Status: Published
• Publication Date: 12-Feb-2008
• Withdrawal Date: 30-Aug-2008
• ICS: 81.040.20 - Glass in building
• Technical Committee: CEN/TC 129 - Glass in building
• Drafting Committee: CEN/TC 129/WG 5 - Coated glass for mirrors
• Current Stage: 9060 - Closure of 2 Year Review Enquiry - Review Enquiry
• Start Date: 04-Mar-2018
• Completion Date: 04-Mar-2018
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/135 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on flat glass, profiled glass and glass block products
• Ref Project: SIST EN 1036-2:2008 - Glass in Building - Mirrors from silver-coated float glass for internal use - Part 2: Evaluation of conformity/Product standard

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Glass in Building - Mirrors from silver-coated float glass for internal use - Part 2: Evaluation of conformity/Product standardSteklo v gradbeništvu - Ogledala iz stekla s srebrno prevleko za uporabo v notranjosti stavb - 2. del: Ovrednotenje skladnosti/standard za izdelekVerre dans la construction - Miroirs en glace argentée pour l'intérieur - Partie 2: Evaluation de la conformité; norme de produitGlas im Bauwesen - Spiegel aus silberbeschichtetem Floatglas für den Innenbereich - Teil 2: Konformitätsbewertung; ProduktnormTa slovenski standard je istoveten z:EN 1036-2:2008SIST EN 1036-2:2008en,fr,de81.040.20ICS:SLOVENSKI
STANDARDSIST EN 1036-2:200801-maj-2008







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1036-2February 2008ICS 81.040.20 English VersionGlass in building - Mirrors from silver-coated float glass forinternal use - Part 2: Evaluation of conformity; product standardVerre dans la construction - Miroirs en glace argentée pourl'intérieur - Partie 2: Evaluation de la conformité; norme deproduitGlas im Bauwesen - Spiegel aus silberbeschichtetemFloatglas für den Innenbereich - Teil 2:Konformitätsbewertung; ProduktnormThis European Standard was approved by CEN on 29 December 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1036-2:2008: E



EN 1036-2:2008 (E) 2 Contents Page Foreword.4 1 Scope.5 2 Normative references.5 3 Terms and definitions.6 4 Requirements.6 4.1 Product description.6 4.2 Conformity with the definition of mirror.7 4.3 Determination of the characteristic’s performances.7 4.3.1 Characteristics of mirror.7 4.3.2 Determination of characteristics of mirrors.8 4.4 Durability.9 4.5 Dangerous substances.10 5 Evaluation of conformity.10 5.1 General.10 5.2 Initial type testing of the product (see 5.1, 2)).10 5.2.1 General.
...