iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 276:2010

(Main)

Binders for paints and varnishes - Linseed stand oil - Requirements and methods of test (ISO 276:2002)

Binders for paints and varnishes - Linseed stand oil - Requirements and methods of test (ISO 276:2002)

ISO 276:2002 specifies the requirements and the corresponding test methods for five types of linseed stand oil suitable for paints and varnishes.

Bindemittel für Beschichtungsstoffe - Leinöl-Standöl - Anforderungen und Prüfverfahren (ISO 276:2002)

Diese Internationale Norm legt die Anforderungen und die entsprechenden Prüfverfahren für fünf Typen von Leinöl Standöl für Beschichtungsstoffe fest.

Liants pour peintures et vernis - Standolies d'huile de lin - Exigences et méthodes d'essai (ISO 276:2002)

L'ISO 276:2002 spécifie les exigences et les méthodes d'essai correspondantes de cinq types de standolie d'huile de lin pour peintures et vernis.

Veziva za barve in lake - Polimerizirano laneno olje - Zahteve in preskusne metode (ISO 276:2002)

Ta mednarodni standard določa zahteve in ustrezne preskusne metode za pet vrst polimeriziranega lanenega olja, primernega za barve in lake.

General Information

Status
Withdrawn
Publication Date
09-Nov-2010
Withdrawal Date
18-May-2021
ICS
87.060.20 - Binders
Technical Committee
CEN/TC 139 - Paints and varnishes
Drafting Committee
CEN/TC 139 - Paints and varnishes
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
19-May-2021
Ref Project
SIST EN ISO 276:2012 - Binders for paints and varnishes - Linseed stand oil - Requirements and methods of test (ISO 276:2002)

Relations

Replaced By
EN ISO 276:2021 - Binders for paints and varnishes - Linseed stand oil - Requirements and methods of test (ISO 276:2019)
Effective Date
15-Jul-2018

Buy Standard

EN ISO 276:2012EN ISO 276:2012
PreviousNext
Standard
EN ISO 276:2012
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 276:2012
01-januar-2012
Veziva za barve in lake - Polimerizirano laneno olje - Zahteve in preskusne metode
(ISO 276:2002)
Binders for paints and varnishes - Linseed stand oil - Requirements and methods of test
(ISO 276:2002)
Bindemittel für Beschichtungsstoffe - Leinöl-Standöl - Anforderungen und Prüfverfahren
(ISO 276:2002)
Liants pour peintures et vernis - Standolies d'huile de lin - Exigences et méthodes d'essai
(ISO 276:2002)
Ta slovenski standard je istoveten z: EN ISO 276:2010
ICS:
87.060.20 Veziva Binders
SIST EN ISO 276:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 276:2012

---------------------- Page: 2 ----------------------

SIST EN ISO 276:2012


EUROPEAN STANDARD
EN ISO 276

NORME EUROPÉENNE

EUROPÄISCHE NORM
November 2010
ICS 87.060.20
English Version
Binders for paints and varnishes - Linseed stand oil -
Requirements and methods of test (ISO 276:2002)
Liants pour peintures et vernis - Standolies d'huile de lin - Bindemittel für Beschichtungsstoffe - Leinöl-Standöl -
Exigences et méthodes d'essai (ISO 276:2002) Anforderungen und Prüfverfahren (ISO 276:2002)
This European Standard was approved by CEN on 16 October 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 276:2010: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 276:2012
EN ISO 276:2010 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 276:2012
EN ISO 276:2010 (E)
Foreword
The text of ISO 276:2002 has been prepared by Technical Committee ISO/TC 35 “Paints and varnishes” of
the International Organization for Standardization (ISO) and has been taken over as EN ISO 276:2010 by
Technical Committee CEN/TC 139 “Paints and varnishes” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by May 2011, and conflicting national standards shall be withdrawn at the
latest by May 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 276:2002 has been approved by CEN as a EN ISO 276:2010 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 276:2012

---------------------- Page: 6 ----------------------

SIST EN ISO 276:2012

INTERNATIONAL ISO
STANDARD 276
Second edition
2002-07-01

Binders for paints and varnishes —
Linseed stand oil — Requirements and
methods of test
Liants pour peintures et vernis — Standolies d'huile de lin — Exigences et
méthodes d'essai




Reference number
ISO 276:2002(E)
©
ISO 2002

---------------------- Page: 7 ----------------------

SIST EN ISO 276:2012
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 7142:2023(Main)
Binders for paints and varnishes - Epoxy resins - General methods of test (ISO 7142:2023)
SIST EN ISO 7142:2023

This document specifies general methods of test for epoxy resins for use in paints, varnishes and similar products. It is also applicable to those solutions made from epoxy resins that are intended for use as binders for paints and varnishes.
The test methods described in this document are not intended for epoxy esters.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 13885-1:2021(Main)
Gel permeation chromatography (GPC) - Part 1: Tetrahydrofuran (THF) as eluent (ISO 13885-1:2020)
SIST EN ISO 13885-1:2021

This document specifies the determination of the molar-mass distribution and the average molar mass values Mn (number average) and Mw (weight average) of polymers that are soluble in tetrahydrofuran (THF) by gel permeation chromatography (GPC).
NOTE    Also known as size exclusion chromatography (SEC).
Even though the chromatograms obtained show good repeatability, it is possible that this method cannot be used with certain polymer types because of specific interactions (e.g. adsorption) within the sample/eluent/column system.
The conditions specified in this document are not applicable to the GPC analysis of polymer samples with Mw values greater than 106 g/mol and/or of polymers with elution limits outside the calibration range (see 7.6 and Annex C).
This document includes no correction method (e.g. for the elimination of peak broadening. If absolute molar-mass values are required, an absolute method (e.g. membrane osmometry for Mn or light scattering for Mw) can be used.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 13885-3:2021(Main)
Gel permeation chromatography (GPC) - Part 3: Water as eluent (ISO 13885-3:2020)
SIST EN ISO 13885-3:2021

This document specifies the determination of the molar-mass distribution and the average molar mass values Mn (number average) and Mw (weight average) of polymers that are soluble in water by gel permeation chromatography (GPC).
NOTE    Also known as size exclusion chromatography (SEC).
This method is applicable to neutral polymers and polyanions (e.g. polycarboxylates, polysaccharides, fully hydrolyzed polyvinyl alcohols and high-molecular polyethylene oxides). It is not applicable to polycations [e.g. polyvinylpyrrolidone, polyvinylpyridine, salts of poly(diallyl‑N,N‑dimethyl‑azacyclopentane), chitosan].
Despite good solubility in the mobile phase and even though the chromatograms obtained show good repeatability, it is possible that this method cannot be used with certain polymer types because of specific interactions (e.g. adsorption) within the sample/eluent/column system (see also Clause 12).
The conditions specified in this document are not applicable to the GPC analysis of polymer samples with Mw values greater than 106 g/mol and/or polymers with elution limits outside the calibration range (see 7.6 and Annex C).
This document includes no correction methods (e.g. for the elimination of peak broadening). If absolute molar mass values are required, an absolute method (e.g. membrane osmometry for Mn or light scattering for Mw) can be used.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 13885-2:2021(Main)
Gel permeation chromatography (GPC) - Part 2: N,N-Dimenthylacetamide (DMAC) as eluent (ISO 13885-2:2020)
SIST EN ISO 13885-2:2021

This document specifies the determination of the molar-mass distribution and the average molar mass values Mn (number average) and Mw (weight average) of polymers that are soluble in DMAC (N,N-Dimethylacetamide) by gel permeation chromatography (GPC).
NOTE    Also known as size exclusion chromatography (SEC).
Even though the chromatograms obtained show good repeatability, it is possible that this method cannot be used with certain polymer types because of specific interactions (e.g. adsorption) within the sample/eluent/column system.
The conditions specified in this document are not applicable to the GPC analysis of polymer samples with Mw values greater than 106 g/mol and/or polymers with elution limits outside the calibration range (see 7.6 and Annex C).
This document includes no correction method (e.g. for the elimination of peak broadening). If absolute molar mass values are required, an absolute method (e.g. membrane osmometry for Mn or light scattering for Mw) can be used.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 276:2021(Main)
Binders for paints and varnishes - Linseed stand oil - Requirements and methods of test (ISO 276:2019)
SIST EN ISO 276:2021

This document specifies the requirements and the corresponding test methods for five types of linseed stand oil suitable for paints and varnishes.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 4629-3:2020(Main)
Binders for paints and varnishes - Determination of hydroxyl value - Part 3: Rapid test (ISO 4629-3:2018)
SIST EN ISO 4629-3:2020

This document specifies a titrimetric method for determining the hydroxyl groups in resins and binders for paints and varnishes.
This method is primarily suitable for neutral media. Acidic products provide higher values; neutral products provide, through neutralization of the acidic carbamates, lower values. For these products, preliminary tests are performed to ensure the applicability of the method.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 4625-1:2020(Main)
Binders for paints and varnishes - Determination of softening point - Part 1: Ring-and-ball method (ISO 4625-1:2020)
SIST EN ISO 4625-1:2020

This document specifies the test methods for determining the softening point of resins (including rosin)
and similar materials by means of ring-and-ball apparatus.
Both manual and automated methods are specified, the automated method being the reference method.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 3251:2019(Main)
Paints, varnishes and plastics - Determination of non-volatile-matter content (ISO 3251:2019)
SIST EN ISO 3251:2019

This document specifies a method for determining the non-volatile-matter content by mass of paints, varnishes, binders for paints and varnishes, polymer dispersions and condensation resins such as phenolic resins (resols, novolak solutions etc.).
The method is also applicable to formulated dispersions containing fillers, pigments and other auxiliaries (e.g. thickeners, film-forming agents).
NOTE 1    The non-volatile-matter content of a product is not an absolute quantity but depends upon the temperature and period of heating used for the determination. Consequently, when using this method, only relative and not true values for non-volatile-matter content are obtained owing to solvent retention, thermal decomposition and evaporation of low molecular mass constituents. The method is therefore primarily intended for testing different batches of the same type of product.
NOTE 2    This method is suitable for synthetic rubber lattices, provided heating for a specific period of time is considered appropriate (ISO 124 specifies heating until the loss in mass of a 2 g test portion following successive periods of heating is less than 0,5 mg).
NOTE 3    In-house methods for determining non-volatile matter often include drying with infrared or microwave radiation. Standardization of such methods is not possible, since they are not generally applicable. Several polymer compositions tend to decompose during such treatment and therefore give incorrect results.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 150:2018(Main)
Raw, refined and boiled linseed oil for paints and varnishes - Specifications and methods of test (ISO 150:2018)
SIST EN ISO 150:2019

This document specifies the requirements and the corresponding methods of test for raw, refined and boiled linseed oils for paints and varnishes.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 3681:2018(Main)
Binders for paints and varnishes - Determination of saponification value - Titrimetric method (ISO 3681:2018)
SIST EN ISO 3681:2019

This document specifies a titrimetric method for determining the esterified-acid content in binders for paints and varnishes, free acids and acid anhydrides being necessarily included in the result obtained.
Because different binders vary in their resistance to saponification, this document is of limited applicability. If necessary, completeness of saponification can be checked by repeating the test under more severe conditions achieved by the use of longer saponification time, more concentrated potassium hydroxide solution, or a higher-boiling alcohol as solvent.
Annex A specifies a procedure suitable for binders that saponify with difficulty.
The method is not applicable to those materials that show further reaction with alkalis beyond normal saponification.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day