EN ISO 11553-1:2020/A11:2020
(Amendment)Safety of machinery - Laser processing machines - Part 1: Laser safety requirements (ISO 11553-1:2020)
Safety of machinery - Laser processing machines - Part 1: Laser safety requirements (ISO 11553-1:2020)
2020-05-29 PeC: to be offerered for MD
2020-04-30: This A11 will introduce revised Annex ZA for EN ISO 11553-1:2020. Both mother standard and A11 will be offered to OJEU for citation
Sicherheit von Maschinen - Laserbearbeitungsmaschinen - Teil 1: Anforderungen an die Lasersicherheit (ISO 11553-1:2020)
No scope available
Sécurité des machines - Machines à laser - Partie 1: Exigences de sécurité laser (ISO 11553-1:2020)
Varnost strojev - Laserski obdelovalni stroji - 1. del: Varnostne zahteve za laser (ISO 11553-1:2020)
General Information
Relations
Overview
EN ISO 11553-1:2020/A11:2020 is a CEN amendment to EN ISO 11553-1:2020 - Safety of machinery - Laser processing machines - Part 1: Laser safety requirements (ISO 11553-1:2020). The A11 amendment (approved 14 October 2020) revises the informative Annex ZA that maps the standard to the essential requirements of the EU Machinery Directive (2006/42/EC). When cited in the Official Journal of the European Union (OJEU), the normative clauses of this standard provide a presumption of conformity with the corresponding Directive requirements for laser processing machines.
Key topics and requirements
This standard and its A11 amendment focus on laser machine safety and the interface between technical requirements and regulatory conformity. Main topics include:
- Laser hazard considerations for laser processing machines (optical and non-optical hazards) and required design measures.
- Safety-related design and construction practices for machinery to reduce laser radiation risks during manufacture, setup, operation, maintenance and servicing.
- Control measures and protective devices, such as interlocks, guarding, emergency stops and administrative controls-aimed at preventing or reducing exposure to hazardous radiation.
- Information for use and safety documentation, including labeling, warnings and operator instructions that are necessary to maintain safe operation.
- Relationship to Machinery Directive: Annex ZA in A11 provides a clause-by-clause correspondence (notably clauses 5–8 and clause 7 related to laser radiation) to Annex I of Directive 2006/42/EC to support conformity assessment.
- Scope and applicability for laser processing machinery (ICS: 13.110 Safety of machinery; 31.260 Optoelectronics/laser equipment).
(Details remain high-level in this summary; consult the full standard for prescriptive technical requirements and normative text.)
Practical applications and users
EN ISO 11553-1:2020/A11 is intended for:
- Manufacturers and system integrators of laser cutting, welding, marking and similar laser processing machines to design compliant equipment.
- Safety and compliance engineers preparing risk assessments, technical documentation and CE marking evidence.
- Notified bodies and conformity assessors using the Annex ZA mapping when evaluating machines against the Machinery Directive.
- Maintenance teams and end-users seeking manufacturer guidance and safety instructions to operate and service laser machinery safely.
- Regulators and standards committees aligning national standards and procurement specifications.
Related standards
- ISO/EN standards on laser safety and machine safety generally interface with EN ISO 11553-1; consult the Machinery Directive and other sector-specific standards for full compliance context.
Keywords: EN ISO 11553-1, laser safety, laser processing machines, Machinery Directive 2006/42/EC, Annex ZA, CEN, machine safety.
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2021
Varnost strojev - Laserski obdelovalni stroji - 1. del: Varnostne zahteve za laser
(ISO 11553-1:2020)
Safety of machinery - Laser processing machines - Part 1: Laser safety requirements
(ISO 11553-1:2020)
Sicherheit von Maschinen - Laserbearbeitungsmaschinen - Teil 1: Anforderungen an die
Sicherheit von Lasern (ISO 11553-1:2020)
Sécurité des machines - Machines à laser - Partie 1: Exigences de sécurité laser (ISO
11553-1:2020)
Ta slovenski standard je istoveten z: EN ISO 11553-1:2020/A11:2020
ICS:
13.110 Varnost strojev Safety of machinery
31.260 Optoelektronika, laserska Optoelectronics. Laser
oprema equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 11553-
EUROPEAN STANDARD
1:2020/A11
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2020
ICS 13.110; 31.260
English Version
Safety of machinery - Laser processing machines - Part 1:
Laser safety requirements (ISO 11553-1:2020)
Sécurité des machines - Machines à laser - Partie 1: Sicherheit von Maschinen -
Exigences de sécurité laser (ISO 11553-1:2020) Laserbearbeitungsmaschinen - Teil 1: Anforderungen
an die Sicherheit von Lasern (ISO 11553-1:2020)
This amendment A11 modifies the European Standard EN ISO 11553-1:2020; it was approved by CEN on 14 October 2020.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11553-1:2020/A11:2020 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Directive2006/42/EC aimed to be cove
...
Frequently Asked Questions
EN ISO 11553-1:2020/A11:2020 is a amendment published by the European Committee for Standardization (CEN). Its full title is "Safety of machinery - Laser processing machines - Part 1: Laser safety requirements (ISO 11553-1:2020)". This standard covers: 2020-05-29 PeC: to be offerered for MD 2020-04-30: This A11 will introduce revised Annex ZA for EN ISO 11553-1:2020. Both mother standard and A11 will be offered to OJEU for citation
2020-05-29 PeC: to be offerered for MD 2020-04-30: This A11 will introduce revised Annex ZA for EN ISO 11553-1:2020. Both mother standard and A11 will be offered to OJEU for citation
EN ISO 11553-1:2020/A11:2020 is classified under the following ICS (International Classification for Standards) categories: 13.110 - Safety of machinery; 31.260 - Optoelectronics. Laser equipment. The ICS classification helps identify the subject area and facilitates finding related standards.
EN ISO 11553-1:2020/A11:2020 has the following relationships with other standards: It is inter standard links to EN ISO 11553-1:2020. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN ISO 11553-1:2020/A11:2020 is associated with the following European legislation: EU Directives/Regulations: 2006/42/EC; Standardization Mandates: M/396. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase EN ISO 11553-1:2020/A11:2020 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.
The article discusses the release of an updated standard, EN ISO 11553-1:2020/A11:2020, which focuses on the safety requirements for laser processing machines. The A11 revision includes a revised Annex ZA. Both the mother standard and the A11 revision are set to be offered to the Official Journal of the European Union (OJEU) for citation.
제목: EN ISO 11553-1:2020/A11:2020 - 기계의 안전 - 레이저 가공기 - 제1부: 레이저 안전 요구사항 (ISO 11553-1:2020) 내용: 2020-05-29 PeC: MD 제공 예정 2020-04-30: 이 번호 A11에서는 EN ISO 11553-1:2020에 대한 개정된 부록 ZA를 소개할 예정입니다. 모체 표준과 A11 모두 OJEU에 인용을 위해 제공될 것입니다.
기사 제목: EN ISO 11553-1:2020/A11:2020 - 기계의 안전 - 레이저 가공기 - 파트 1: 레이저 안전 요구사항 (ISO 11553-1:2020) 기사 내용: 2020-05-29 PeC: MD 제공 예정 2020-04-30: 이 A11은 EN ISO 11553-1:2020의 개정된 부록 ZA를 도입합니다. 모더 스탠다드와 A11 모두 OJEU에 인용을 위해 제공될 예정입니다.
記事のタイトル：EN ISO 11553-1:2020/A11:2020 - 機械の安全 - レーザー加工機 - 第1部：レーザーの安全要件（ISO 11553-1:2020） 記事の内容：2020-05-29 PeC：MDへ提供予定 2020-04-30：このA11では、EN ISO 11553-1:2020の改訂された付録ZAが紹介されます。母体規格とA11の両方がOJEUに引用される予定です。
記事タイトル：EN ISO 11553-1:2020/A11:2020 - 産業用機器の安全 - レーザー加工機 - 第1部：レーザー安全要件（ISO 11553-1:2020） 記事内容：2020-05-29 PeC：MDへの提供予定 2020-04-30：このA11では、EN ISO 11553-1:2020の修正されたAnnex ZAが導入されます。親スタンダードとA11の両方がOJEUに引用される予定です。
The article discusses the introduction of a revised Annex ZA for EN ISO 11553-1:2020, which deals with safety requirements for laser processing machines. Both the mother standard and the revised Annex ZA will be offered for citation in the OJEU (Official Journal of the European Union).
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...