Petroleum, chemical and gas service industries - Packaged, integrally geared centrifugal air compressors (ISO 10442:2002)

ISO 10442:2002 specifies requirements and gives recommendations for the design, materials, fabrication, inspection, testing and preparation for shipment of constant-speed, packaged, integrally geared centrifugal air compressors, including their accessories, for use in the petroleum, chemical and gas service industries. It is also applicable to gas services other than air that are non-hazardous and non-toxic. It is not applicable to machines that develop a pressure rise of less than 35 kPa above atmospheric pressure, which are classed as fans or blowers.

Erdöl-, Chemie- und Erdgasindustrie - Turbo-Luftkompressoranlagen mit integriertem Getriebe (ISO 10442:2002)

Industries du pétrole, de la chimie et du gaz naturel - Compresseurs d'air centrifuges assemblés à multiplicateur intégré (ISO 10442:2002)

L'ISO 10442:2002 spécifie les exigences et fournit des recommandations pour la conception, les matériaux, la fabrication, le contrôle, la mise à l'essai et la préparation pour l'expédition des compresseurs d'air centrifuges à multiplicateur intégré assemblé à vitesse constante, y compris leurs accessoires, utilisés dans les industries du pétrole, de la chimie et du gaz naturel. Elle peut s'appliquer aux utilisations de gaz autres que l'air, non dangereux et non toxiques. Cette norme ne s'applique pas aux machines qui développent une élévation de pression inférieure à 35 kPa au-dessus de la pression atmosphérique, classées comme ventilateurs ou compresseurs.

Petroleum, chemical and gas service industries - Packaged, integrally geared centrifugal air compressors (ISO 10442:2002)

General Information

Status
Published
Publication Date
30-Nov-2002
Withdrawal Date
29-Jun-2003
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
01-Dec-2002
Completion Date
01-Dec-2002

Buy Standard

Standard
EN ISO 10442:2004
English language
72 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 10442:2004
01-maj-2004
Petroleum, chemical and gas service industries - Packaged, integrally geared
centrifugal air compressors (ISO 10442:2002)
Petroleum, chemical and gas service industries - Packaged, integrally geared centrifugal
air compressors (ISO 10442:2002)
Erdöl-, Chemie- und Erdgasindustrie - Turbo-Luftkompressoranlagen mit integriertem
Getriebe (ISO 10442:2002)
Industries du pétrole, de la chimie et du gaz naturel - Compresseurs d'air centrifuges
assemblés a multiplicateur intégré (ISO 10442:2002)
Ta slovenski standard je istoveten z: EN ISO 10442:2002
ICS:
23.140 .RPSUHVRUMLLQSQHYPDWLþQL Compressors and pneumatic
VWURML machines
75.180.20 Predelovalna oprema Processing equipment
SIST EN ISO 10442:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 10442:2004

---------------------- Page: 2 ----------------------

SIST EN ISO 10442:2004
EUROPEAN STANDARD
EN ISO 10442
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2002
ICS 23.140; 75.180.20
English version
Petroleum, chemical and gas service industries - Packaged,
integrally geared centrifugal air compressors (ISO 10442:2002)
Industries du pétrole, de la chimie et du gaz naturel -
Compresseurs d'air centrifuges assemblés à multiplicateur
intégré (ISO 10442:2002)
This European Standard was approved by CEN on 6 November 2002.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2002 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10442:2002 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 10442:2004
EN ISO 10442:2002 (E)
Foreword
This document (EN ISO 10442:2002) has been prepared by Technical Committee ISO/TC 118
"Compressors, pneumatic tools and pneumatic machines" in collaboration with Technical
Committee CEN/TC 12 "Materials, equipment and offshore structures for petroleum and natural
gas industries", the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by June 2003, and conflicting national
standards shall be withdrawn at the latest by June 2003.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium, Czech
Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg,
Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.
NOTE FROM CMC  The foreword is susceptible to be amended on reception of the German
language version. The confirmed or amended foreword, and when appropriate, the normative
annex ZA for the references to international publications with their relevant European
publications will be circulated with the German version.
Endorsement notice
The text of ISO 10442:2002 has been approved by CEN as EN ISO 10442:2002 without any
modifications.
2

---------------------- Page: 4 ----------------------

SIST EN ISO 10442:2004


INTERNATIONAL ISO
STANDARD 10442
First edition
2002-12-01


Petroleum, chemical and gas service
industries — Packaged, integrally geared
centrifugal air compressors
Industries du pétrole, de la chimie et du gaz naturel — Compresseurs d'air
centrifuges assemblés à multiplicateur intégré




Reference number
ISO 10442:2002(E)
©
 ISO 2002

---------------------- Page: 5 ----------------------

SIST EN ISO 10442:2004
ISO 10442:2002(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
fi
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.