EN ISO 25619-1:2008

Geosynthetics - Determination of compression behaviour - Part 1: Compressive creep properties (ISO 25619-1:2008)

ISO 25619-1:2008 specifies index test methods for determining the compressive creep properties of geosynthetic products. The test specimens are subjected either to normal compressive loading or to a combination of normal compressive loading and shear loading.

Geokunststoffe - Bestimmung des Druckverhaltens - Teil 1: Eigenschaften des Druckkriechens (ISO 25619-1:2008)

Dieser Teil der ISO 25619 legt Index-Prüfverfahren zur Bestimmung der Eigenschaften des Druckkriechens
von geosynthetischen Produkten fest. Die Messproben werden entweder einer normalen Druckbeanspruchung
oder einer Kombination von normaler Druck- und Scherbeanspruchung ausgesetzt.
Das Prüfverfahren nur mit Druckbeanspruchung (siehe Abschnitt 5) ist das Standardverfahren.
Das Prüfverfahren, bei welchem sowohl Druck- als auch Scherkräfte angewandt werden (siehe Abschnitt 6),
ist für Produkte vorgesehen, die gegen Scherbruch anfällig sind, d. h. Produkte mit einer säulenartigen oder
kegel- oder pyramidenförmigen Struktur.
Die Prüfungen werden an trockenen oder in Wasser eingetauchten Messproben durchgeführt. Die
Durchführung der Prüfung in Wasser eingetauchter Messproben ist dafür vorgesehen, wenn irgendein Teil
des Geokunststoff-Produktes ein hydrophiles Polymer enthält.

Géosynthétiques - Détermination du comportement en compression - Partie 1: Propriétés de fluage en compression (ISO 25619-1:2008)

L'ISO 25619‑1:2008 spécifie des méthodes d'essai de référence permettant de déterminer le comportement en compression des produits géosynthétiques. Les éprouvettes sont soumises soit à une charge de compression normale, soit à une combinaison de charge de compression normale et de charge de cisaillement.

Geosintetika - Ugotavljanje obnašanja pri tlačni obremenitvi - 1. del: Lastnosti lezenja pod tlačno obremenitvijo (ISO 25619-1:2008)

General Information

• Status: Withdrawn
• Publication Date: 14-Dec-2008
• Withdrawal Date: 09-Mar-2021
• ICS: 59.080.70 - Geotextiles
• Technical Committee: CEN/TC 189 - Geotextiles and geotextile-related products
• Drafting Committee: CEN/TC 189/WG 3 - Mechanical testing
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 10-Mar-2021
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Ref Project: SIST EN ISO 25619-1:2009 - Geosynthetics - Determination of compression behaviour - Part 1: Compressive creep properties (ISO 25619-1:2008)

Relations

• Replaces: EN 1897:2001 - Geotextiles and geotextile-related products - Determination of the compressive creep properties
• Effective Date: 22-Dec-2008
• Replaced By: EN ISO 25619-1:2021 - Geosynthetics - Determination of compression behaviour - Part 1: Compressive creep properties (ISO 25619-1:2021)
• Effective Date: 25-Apr-2018

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 25619-1:2009
01-maj-2009
1DGRPHãþD
SIST EN 1897:2001
*HRVLQWHWLND8JRWDYOMDQMHREQDãDQMDSULWODþQLREUHPHQLWYLGHO/DVWQRVWL
OH]HQMDSRGWODþQRREUHPHQLWYLMR,62
Geosynthetics - Determination of compression behaviour - Part 1: Compressive creep
properties (ISO 25619-1:2008)
Geokunststoffe - Bestimmung des Druckverhaltens - Teil 1: Eigenschaften des
Druckkriechens (ISO 25619-1:2008)
Géosynthétiques - Détermination du comportement en compression - Partie 1:
Propriétés de fluage en compression (ISO 25619-1:2008)
Ta slovenski standard je istoveten z: EN ISO 25619-1:2008
ICS:
59.080.70 Geotekstilije Geotextiles
SIST EN ISO 25619-1:2009 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 25619-1:2009

---------------------- Page: 2 ----------------------

SIST EN ISO 25619-1:2009
EUROPEAN STANDARD
EN ISO 25619-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2008
ICS 59.080.70 Supersedes EN 1897:2001
English Version
Geosynthetics - Determination of compression behaviour - Part
1: Compressive creep properties (ISO 25619-1:2008)
Géosynthétiques - Détermination du comportement en Geokunststoffe - Bestimmung des Druckverhaltens - Teil 1:
compression - Partie 1: Propriétés de fluage en Eigenschaften des Druckkriechens (ISO 25619-1:2008)
compression (ISO 25619-1:2008)
This European Standard was approved by CEN on 29 November 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 25619-1:2008: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 25619-1:2009
EN ISO 25619-1:2008 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 25619-1:2009
EN ISO 25619-1:2008 (E)
Foreword
This document (EN ISO 25619-1:2008) has been prepared by Technical Committee CEN/TC 189
"Geosynthetics", the secretariat of which is held by NBN, in collaboration with Technical Committee ISO/TC
221 "Geosynthetics".
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2009, and conflicting national standards shall be withdrawn at
the latest by June 2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 1897:2001.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EC Directive(s).
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 25619-1:2009

---------------------- Page: 6 ----------------------

SIST EN ISO 25619-1:2009

INTERNATIONAL ISO
STANDARD 25619-1
First edition
2008-12-15


Geosynthetics — Determination of
compression behaviour —
Part 1:
Compressive creep properties
Géosynthétiques — Détermination
...