iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 737-3:1998

(Main)

Medical gas pipeline systems - Part 3: Pipelines for compressed medical gases and vacuum

Medical gas pipeline systems - Part 3: Pipelines for compressed medical gases and vacuum

This European Standard specifies basic requirements for installation, function, performance, documentation, testing and commissioning of compressed medical gases and vacuum pipeline systems to ensure patient safety by continuous delivery of the correct gas from the pipeline system. It includes basic requirements for the sources of supply, distribution system, control, monitoring and alarm systems and for non-interchangeability between components of different gas systems.

Rohrleitungssysteme für medizinische Gase - Teil 3: Rohrleitungen für medizinische Druckgase und Vakuum

Diese Europäische Norm legt grundlegende Anforderungen an Installation, Funktion, Leistung, Dokumentation, Prüfung und Inbetriebnahme von Rohrleitungssystemen für medizinische Druckgase und Vakuum fest, um durch eine gleichbleibende Abg be des richtigen Gases aus dem Rohrleitungssystem die Patientensicherheit zu gewährleisten. Er umfaßt grundlegende Anforderungen an Versorgungsquellen, Verteilersystem, Regel-, Überwachungs- und Alarmsysteme und an die Unverwechselbarkeit von Komponenten verschiedener Gassysteme.

Systèmes de distribution de gaz médicaux - Partie 3: Systèmes de distribution pour gaz médicaux comprimés et vide (aspiration)

La présente partie de la norme européenne indique les prescriptions fondamentales en matière d'installation, de fonctionnement, de performance, de documentation, d'essais et de réception des systèmes de distribution de gaz médicaux comprimés et de vide (aspiration) pour garantir la sécurité des patients par approvisionnement continu du gaz approprié à partir du système de distribution.

Sistemi napeljav za medicinske pline - 3. del: Napeljave za stisnjene medicinske pline in podtlak

General Information

Status
Withdrawn
Publication Date
06-Oct-1998
Withdrawal Date
03-Apr-2007
ICS
11.040.10 - Anaesthetic, respiratory and reanimation equipment
Technical Committee
CEN/TC 215 - Respiratory and anaesthetic equipment
Drafting Committee
CEN/TC 215/WG 3 - Medical gas supply systems
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
04-Apr-2007
Completion Date
04-Apr-2007
Directive
93/42/EEC - Council Directive 93/42/EEC of 14 June 1993 concerning medical devices
Mandate
M/023 - Standardization mandate to CEN/CENELEC concerning the development of European standards relating to medical devices
Ref Project
SIST EN 737-3:2000 - Medical gas pipeline systems - Part 3: Pipelines for compressed medical gases and vacuum

Relations

Amended By
EN 737-3:1998/A1:1999 - Medical gas pipeline systems - Part 3: Pipelines for compressed medical gases and vacuum
Effective Date
22-Dec-2008
Replaced By
EN ISO 7396-1:2007 - Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum (ISO 7396-1:2007)
Effective Date
22-Dec-2008
Corrected By
EN 737-3:1998/AC:2000 - Medical gas pipeline systems - Part 3: Pipelines for compressed medical gases and vacuum
Effective Date
22-Dec-2008

Buy Standard

EN 737-3:2000EN 737-3:2000
PreviousNext
Standard
EN 737-3:2000
English language
106 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 737-3:2000
01-januar-2000
Sistemi napeljav za medicinske pline - 3. del: Napeljave za stisnjene medicinske
pline in podtlak
Medical gas pipeline systems - Part 3: Pipelines for compressed medical gases and
vacuum
Rohrleitungssysteme für medizinische Gase - Teil 3: Rohrleitungen für medizinische
Druckgase und Vakuum
Systemes de distribution de gaz médicaux - Partie 3: Systemes de distribution pour gaz
médicaux comprimés et vide (aspiration)
Ta slovenski standard je istoveten z: EN 737-3:1998
ICS:
11.040.10 Anestezijska, respiratorna in Anaesthetic, respiratory and
reanimacijska oprema reanimation equipment
SIST EN 737-3:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 737-3:2000

---------------------- Page: 2 ----------------------

SIST EN 737-3:2000

---------------------- Page: 3 ----------------------

SIST EN 737-3:2000

---------------------- Page: 4 ----------------------

SIST EN 737-3:2000

---------------------- Page: 5 ----------------------

SIST EN 737-3:2000

---------------------- Page: 6 ----------------------

SIST EN 737-3:2000

---------------------- Page: 7 ----------------------

SIST EN 737-3:2000

---------------------- Page: 8 ----------------------

SIST EN 737-3:2000

---------------------- Page: 9 ----------------------

SIST EN 737-3:2000

---------------------- Page: 10 ----------------------

SIST EN 737-3:2000

---------------------- Page: 11 ----------------------

SIST EN 737-3:2000

---------------------- Page: 12 ----------------------

SIST EN 737-3:2000

---------------------- Page: 13 ----------------------

SIST EN 737-3:2000

---------------------- Page: 14 ----------------------

SIST EN 737-3:2000

---------------------- Page: 15 ----------------------

SIST EN 737-3:2000

---------------------- Page: 16 ----------------------

SIST EN 737-3:2000

---------------------- Page: 17 ----------------------

SIST EN 737-3:2000

---------------------- Page: 18 ----------------------

SIST EN 737-3:2000

---------------------- Page: 19 ----------------------

SIST EN 737-3:2000

---------------------- Page: 20 ----------------------

SIST EN 737-3:2000

---------------------- Page: 21 ----------------------

SIST EN 737-3:2000

---------------------- Page: 22 ----------------------

SIST EN 737-3:2000

---------------------- Page: 23 ----------------------

SIST EN 737-3:2000

---------------------- Page: 24 ----------------------

SIST EN 737-3:2000

---------------------- Page: 25 ----------------------

SIST EN 737-3:2000

---------------------- Page: 26 ----------------------

SIST EN 737-3:2000

---------------------- Page: 27 ----------------------

SIST EN 737-3:2000

---------------------- Page: 28 ----------------------

SIST EN 737-3:2000

---------------------- Page: 29 ----------------------

SIST EN 737-3:2000

---------------------- Page: 30 ----------------------

SIST EN 737-3:2000

---------------------- Page: 31 ----------------------

SIST EN 737-3:2000

---------------------- Page: 32 ----------------------

SIST EN 737-3:2000

---------------------- Page: 33 ----------------------

SIST EN 737-3:2000

---------------------- Page: 34 ----------------------

SIST EN 737-3:2000

---------------------- Page: 35 ----------------------

SIST EN 737-3:2000

---------------------- Page: 36 ----------------------

SIST EN 737-3:2000

---------------------- Page: 37 ----------------------

SIST EN 737-3:2000

---------------------- Page: 38 ----------------------

SIST EN 737-3:2000

---------------------- Page: 39 ----------------------

SIST EN 737-3:2000

---------------------- Page: 40 ----------------------

SIST EN 737-3:2000

---------------------- Page: 41 ----------------------

SIST EN 737-3:2000

---------------------- Page: 42 ----------------------

SIST EN 737-3:2000

---------------------- Page: 43 ----------------------

SIST EN 737-3:2000

---------------------- Page: 44 ----------------------

SIST EN 737-3:2000

---------------------- Page: 45 ----------------------

SIST EN 737-3:2000

---------------------- Page: 46 ----------------------

SIST EN 737-3:2000

---------------------- Page: 47 ----------------------

SIST EN 737-3:2000

---------------------- Page: 48 ----------------------

SIST EN 737-3:2000

---------------------- Page: 49 ----------------------

SIST EN 737-3:2000

--------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 27427:2023(Main)
Anaesthetic and respiratory equipment - Nebulizing systems and components (ISO 27427:2023)
SIST EN ISO 27427:2023

This document specifies requirements for the safety and performance testing of general-purpose nebulizing systems intended for continuous or breath-actuated delivery of liquids, in aerosol form, to humans through the respiratory system.
This document includes gas-powered nebulizers (which can be powered by, e.g., compressors, pipeline systems, cylinders, etc.) and electrically powered nebulizers [e.g. spinning disc, ultrasonic, vibrating mesh (active and passive), and capillary devices] or manually powered nebulizers. This document does not specify the electrical requirements of electrically powered nebulizers.
This document does not specify the minimum performance of nebulizing systems.
This document does not apply to:
a)       devices intended for nasal deposition;
b)       devices intended solely to provide humidification or hydration by providing water in aerosol form.
NOTE 1        ISO 80601-2-74 and ISO 20789 cover these devices.
c)        drug-specific nebulizers or their components (e.g. metered dose inhalers, metered liquid inhalers, dry powder inhalers).
NOTE 2        ISO 20072 covers these devices.
NOTE 3        See Annex A for rationale.

  • Draft
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 5367:2023(Main)
Anaesthetic and respiratory equipment - Breathing sets and connectors (ISO 5367:2023)
SIST EN ISO 5367:2023

This document specifies minimum requirements for breathing sets and breathing tubes intended to be used with anaesthetic breathing systems, ventilator breathing systems, humidifiers or nebulizers. It applies to breathing sets and breathing tubes and patient end adaptors supplied already assembled and to those supplied as components and assembled in accordance with the manufacturer’s instructions.
This document is applicable to breathing sets which include special components (e.g. water traps) between the patient end and machine end.
Provision is made for coaxial and related bifurcated, double-lumen, or multiple-lumen breathing sets and breathing tubes suitable for use with patient end adaptors.

  • Draft
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 80601-2-72:2023(Main)
Medical electrical equipment - Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients (ISO 80601-2-72:2023)
SIST EN ISO 80601-2-72:2023

This document applies to the basic safety and essential performance of a ventilator in combination with its accessories, hereafter referred to as ME equipment:
—    intended for use in the home healthcare environment;
—    intended for use by a lay operator; and
—    intended for those patients who need differing levels of support from artificial ventilation including for ventilator-dependent patients.
This document is also applicable to those accessories intended by their manufacturer to be connected to a ventilator breathing system or to a ventilator where the characteristics of those accessories can affect the basic safety or essential performance of the ventilator.

  • Draft
    145 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10651-4:2023(Main)
Lung ventilators - Part 4: Particular requirements for user-powered resuscitators (ISO 10651-4:2023)
SIST EN ISO 10651-4:2023

This document specifies requirements for user-powered resuscitators intended for use with all age groups and which are intended to provide lung ventilation to patients whose breathing is inadequate. User-powered resuscitators are designated according to ideal body mass range.
Example user-powered resuscitators include:
—    self-inflating bag resuscitators intended to be squeezed by the user’s hand and refilled by elastic recoil; and
NOTE 1    Self-inflating bag resuscitators are generally transit-operable and can be used in a wide range of environmental and emergency situations.
—    flow-inflating bag resuscitators intended to be squeezed by the user’s hand and refilled by a flow from a medical gas source.
This document is also applicable to those accessories that are intended for use with resuscitators where the characteristics of those accessories can affect the safety of the user-powered resuscitator.
Examples of such accessories include face masks, PEEP valves, capnometric indicators, manometers, metronomes, flow restrictors, filters, gas refill valves, oxygen gas mixers, connectors, electronic feedback devices, electronic sensors and transmission of data to other equipment.
This document is also applicable to point-of-use packaging.
This document does not specify the requirements for:
—    gas-powered emergency resuscitators, which are given in ISO 10651-5;
—    electrically-powered resuscitators;
—    gas powered resuscitators for professional healthcare facilities; and
—    anaesthetic reservoir bags, which are given in ISO 5362.
NOTE 2    This document has been prepared to address the relevant essential principles[24] and labelling[25] guidances of the International Medical Devices Regulators Forum (IMDRF) as indicated in Annex D.
NOTE 3    This document has been prepared to address the relevant essential principles of safety and performance of ISO 16142-1:2016 as indicated in Annex E.
NOTE 4    This document has been prepared to address the relevant general safety and performance requirements of European regulation (EU) 2017/745[23] as indicated in Annex F.

  • Standard
    76 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    79 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 21917:2022(Main)
Anaesthetic and respiratory equipment - Voice prostheses (ISO 21917:2021)
SIST EN ISO 21917:2023

This document specifies performance requirements for voice prostheses including requirements for marking, packaging and information to be provided by the manufacturer as well as test methods for the evaluation of physical characteristics of voice prostheses.
NOTE      There is guidance or rationale for this list item contained in A.2.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 5361:2023(Main)
Anaesthetic and respiratory equipment - Tracheal tubes and connectors (ISO 5361:2023)
SIST EN ISO 5361:2023

This document provides specific requirements for the basic safety and essential performance for oro-tracheal and naso-tracheal tubes and tracheal tube connectors, tracheal tubes with walls reinforced with metal or plastic, tracheal tubes with shoulders, tapered tracheal tubes, tracheal tubes with means for suctioning, monitoring or delivery of drugs or other gases, and the many other types of tracheal tubes devised for specialized applications.
Tracheobronchial (including endobronchial) tubes (see ISO 16628), tracheostomy tubes (see ISO 5366), and supralaryngeal airways (see ISO 11712) are excluded from the scope of this document.
Tracheal tubes intended for use with flammable anaesthetic gases or agents, lasers, or electrosurgical equipment are outside the scope of this document.
NOTE 1      There is guidance or rationale for this clause contained in Annex A.2.
NOTE 2      ISO 11990-1, ISO 11990-2, and ISO 14408 deal with laser surgery of the airway.

  • Standard
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16628:2022(Main)
Anaesthetic and respiratory equipment - Tracheobronchial tubes (ISO 16628:2022)
SIST EN ISO 16628:2022

This document specifies requirements for safety, materials, design and information supplied with tracheobronchial tubes. These devices are used when isolation of the airways of one or both lungs is required.
Tracheal tubes that include bronchus blockers are excluded from the scope of this document

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18778:2022(Main)
Respiratory equipment - Particular requirements for basic safety and essential performance of infant cardiorespiratory monitors (ISO 18778:2022)
SIST EN ISO 18778:2023

This document applies to the basic safety and essential performance of an infant cardiorespiratory monitor, as defined in 3.10, hereafter also referred to as ME equipment, in combination with its accessories:
—    intended for use in the home healthcare environment;
—    intended for use by a lay operator;
—    intended to monitor cardiorespiratory parameters in sleeping or resting children under three years of age; and
—    intended for transit-operable use.
NOTE       An infant cardiorespiratory monitor can also be used in professional health care facilities.
This document is also applicable to those accessories intended by their manufacturer to be connected to the infant cardiorespiratory monitor, where the characteristics of those accessories can affect the basic safety or essential performance of the infant cardiorespiratory monitor.
EXAMPLE        probes, cables distributed alarm system

  • Standard
    68 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 23368:2022(Main)
Anaesthetic and respiratory equipment - Low-flow nasal cannulae for oxygen therapy (ISO 23368:2022)
SIST EN ISO 23368:2022

This document specifies requirements for low-flow nasal cannulae, used in both home care and hospital environments for the administration of oxygen therapy.
This document does not include requirements to prevent the proliferation of fire within the tubing but does specify a user-detachable connection that can be used to fit a fire-activated oxygen shut-off device.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 23372:2022(Main)
Anaesthetic and respiratory equipment - Air entrainment devices (ISO 23372:2022)
SIST EN ISO 23372:2022

This document specifies minimum performance and safety requirements for air entrainment devices used for delivery of designated oxygen concentrations to patients. It provides a test method to check the accuracy of the oxygen concentration in the air/oxygen mixture generated by the air entrainment devices. Air entrainment devices can be fixed to deliver a single oxygen concentration or adjustable, to deliver a range of oxygen concentration outputs.
This document also specifies marking requirements and recommends an optional system of colour coding to assist the user in identifying the designated oxygen concentration.
This document does not cover air entrainment devices which are integral with medical devices specified in other standards (e.g. emergency lung ventilators, humidifiers, nebulizers).

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day