EN 13225:2013

Precast concrete products - Linear structural elements

This European Standard identifies the requirements, the basic performance criteria and evaluation of conformity for precast linear elements (such as columns, beams and frame elements) made of reinforced or prestressed normal or lightweight concrete, used for the construction of the structures of buildings and other civil engineering works, except bridges.
This document covers terminology, performance criteria, tolerances, relevant physical properties, test methods, and aspects of transport and erection.
This document does not cover load bearing capacity determined by testing.
This standard does not cover lintels with length up to 4,5 m used in masonry walls.

Betonfertigteile - Stabförmige tragende Bauteile

Diese Europäische Norm legt die Anforderungen, die grundlegenden Leistungskriterien und die Konformitäts-bewertung für stabförmige Betonfertigteile (wie z. B. Stützen, Träger und Rahmenelemente) aus bewehrtem oder vorgespanntem Normal- oder Leichtbeton fest, die im Hoch- und Tiefbau mit Ausnahme des Brückenbaus eingesetzt werden.
In diesem Dokument werden Begriffe, Leistungskriterien, Toleranzen, die maßgebenden physikalischen Eigenschaften, Prüfverfahren und Aspekte von Transport und Aufbau festgelegt.
Dieses Dokument gilt nicht für die durch die Prüfung bestimmte Tragfähigkeit.
Diese Norm gilt nicht für Stahlbetonträger mit einer Länge von bis zu 4,5 m, welche in Mauerwerkswenden verwendet werden

Produits préfabriqués en béton - Éléments de structure linéaires

La présente Norme européenne spécifie les prescriptions, les critères relatifs aux performances de base et l’évaluation de la conformité des éléments linéaires préfabriqués (tels que les poteaux, les poutres et les éléments de portiques) fabriqués en béton de granulats courants ou légers, armé ou précontraint, et utilisés pour la construction de structures de bâtiments et d’autres ouvrages de génie civil, à l’exception des ponts.
Le présent document couvre la terminologie, les critères relatifs aux performances, les tolérances, les propriétés physiques pertinentes, les méthodes d’essai et les aspects liés au transport et à la mise en œuvre.
Il ne couvre pas la capacité portante déterminée par des essais.
Il ne couvre pas les linteaux d’une longueur inférieure ou égale à 4,5 m utilisés dans les murs en maçonnerie.

Montažni betonski izdelki - Linijski konstrukcijski elementi

Ta evropski standard opredeljuje zahteve, osnovna merila učinkovitosti in vrednotenje skladnosti za montažne linijske elemente (kot so stebri, tramovi in okvirni elementi), narejene iz armiranega ali prednapetega običajnega ali lahkega betona, ki se uporabljajo za gradnjo struktur zgradb in drugih inženirskih objektov z izjemo mostov. Ta dokument zajema izrazje, merila učinkovitosti, tolerance, ustrezne fizikalne lastnosti, preskusne metode ter vidike transporta in postavitve. Ta dokument ne vključuje nosilnosti, ki se določi s preskušanjem. Ta standard ne vključuje preklad z dolžino do 4,5 m, ki se uporabljajo v zidovih.

General Information

• Status: Published
• Publication Date: 02-Apr-2013
• Withdrawal Date: 30-Oct-2013
• ICS: 91.100.30 - Concrete and concrete products
• Technical Committee: CEN/TC 229 - Precast concrete products
• Drafting Committee: CEN/TC 229/WG 1 - Products for which the stability requirements is predominant
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 03-Apr-2013
• Due Date: 17-Mar-2013
• Completion Date: 03-Apr-2013
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/100 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on precast concrete products
• Ref Project: SIST EN 13225:2013 - Precast concrete products - Linear structural elements

Relations

• Replaces: EN 13225:2004 - Precast concrete products - Linear structural elements
• Effective Date: 10-Apr-2013
• Replaces: EN 13225:2004/AC:2006 - Precast concrete products - Linear structural elements
• Effective Date: 10-Apr-2013

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Montažni betonski izdelki - Linijski konstrukcijski elementiBetonfertigteile - Stabförmige BetonbauteileProduits préfabriqués en béton - Éléments de structure linéairesPrecast concrete products - Linear structural elements91.100.30Beton in betonski izdelkiConcrete and concrete productsICS:Ta slovenski standard je istoveten z:EN 13225:2013SIST EN 13225:2013en,fr,de01-september-2013SIST EN 13225:2013SLOVENSKI
STANDARDSIST EN 13225:2004/AC:2007SIST EN 13225:20041DGRPHãþD



SIST EN 13225:2013



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13225
April 2013 ICS 91.100.30 Supersedes EN 13225:2004English Version
Precast concrete products - Linear structural elements
Produits préfabriqués en béton - Éléments de structure linéaires
Betonfertigteile - Stabförmige tragende Bauteile This European Standard was approved by CEN on 19 January 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13225:2013: ESIST EN 13225:2013



EN 13225:2013 (E) 2 Contents Page The numbering of clauses is strictly related to EN 13369, Common rules for precast concrete products, at least for the first three digits. When a clause of EN 13369 is not relevant or included in a more general reference of this standard, its number is omitted and this may result in a gap on numbering. Foreword . 3 Introduction . 5 1 Scope . 6 2 Normative references . 6 3 Terms and definitions . 6 4 Requirements . 6 4.1 Material requirements . 6 4.2 Production requirements . 7 4.3 Finished product requirements . 7 4.3.1 Geometrical properties . 7 4.3.2 Surface characteristics . 10 4.3.3 Mechanical resistance . 10 4.3.4 Resistance and reaction to fire . 11 4.3.7 Durability . 11 4.3.8 Other requirements . 11 4.3.9 Dangerous substances .
...