iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

CEN ISO/TS 80004-8:2015

(Main)

Nanotechnologies - Vocabulary - Part 8: Nanomanufacturing processes (ISO/TS 80004-8:2013)

Nanotechnologies - Vocabulary - Part 8: Nanomanufacturing processes (ISO/TS 80004-8:2013)

ISO/TS 80004-8:2013 gives terms and definitions related to nanomanufacturing processes in the field of nanotechnologies. It forms one part of multi-part terminology and definitions documentation covering the different aspects of nanotechnologies.

Nanotechnologien - Fachwörterverzeichnis - Teil 8: Industrieller Nanoherstellungsprozess (ISO/TS 80004-8:2013)

Diese Technische Spezifikation enthält Begriffe und Definitionen, die sich auf Prozesse der Nanoherstellung im Bereich der Nanotechnologien beziehen. Sie stellt einen Teil einer mehrteiligen Dokumentation zur Terminologie und zu Festlegungen dar, die die verschiedenen Aspekte von Nanotechnologien behandelt.
Alle Begriffe bezüglich Prozessen in diesem Dokument sind für die Nanoherstellung maßgebend. Viele der aufgeführten Prozesse sind nicht ausschließlich nur für den Nanomaßstab maßgebend. In Abhängigkeit von regelbaren Bedingungen können derartige Prozesse zu Materialeigenschaften im Nanomaßstab, oder alternativ auch in größeren Maßstäben führen.
Es gibt im Zusammenhang mit der Nanoherstellung viele weitere Begriffe, die Werkzeuge, Teile, Werkstoffe, Verfahren zur Systemkontrolle oder Messtechnik-Verfahren bezeichnen, die aber nicht Gegenstand des Anwendungsbereiches dieses Dokumentes sind.

Nanotechnologies - Vocabulaire - Partie 8: Processus de nanofabrication (ISO/TS 80004-8:2013)

L'ISO/TS 80004-8:2013 donne les termes et définitions concernant les processus de nanofabrication dans le domaine des nanotechnologies. Elle ne constitue qu'une partie d'une documentation de terminologie et de définitions, en plusieurs parties, couvrant les différents aspects des nanotechnologies.

Nanotehnologije - Slovar - 8. del: Procesi nanoproizvodnje (ISO/TS 80004-8:2013)

General Information

Status
Withdrawn
Publication Date
19-May-2015
Withdrawal Date
01-Dec-2020
ICS
01.040.07 - Natural and applied sciences (Vocabularies)
07.030 - Physics. Chemistry
07.120 - Nanotechnologies
Technical Committee
CEN/TC 352 - Nanotechnologies
Drafting Committee
CEN/TC 352 - Nanotechnologies
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
02-Dec-2020
Ref Project
SIST-TS CEN ISO/TS 80004-8:2015 - Nanotechnologies - Vocabulary - Part 8: Nanomanufacturing processes (ISO/TS 80004-8:2013)

Relations

Replaced By
CEN ISO/TS 80004-8:2020 - Nanotechnologies - Vocabulary - Part 8: Nanomanufacturing processes (ISO/TS 80004-8:2020)
Effective Date
26-Dec-2018

Buy Standard

TS CEN ISO/TS 80004-8:2015TS CEN ISO/TS 80004-8:2015
PreviousNext
Technical specification
TS CEN ISO/TS 80004-8:2015
English language
37 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TS CEN ISO/TS 80004-8:2015
01-julij-2015
Nanotehnologije - Slovar - 8. del: Procesi nanoproizvodnje (ISO/TS 80004-8:2013)
Nanotechnologies - Vocabulary - Part 8: Nanomanufacturing processes (ISO/TS 80004-
8:2013)
Nanotechnologien - Fachwörterverzeichnis - Teil 8: Industrieller
Nanoherstellungsprozess (ISO/TS 80004-8:2013)
Nanotechnologies - Vocabulaire - Partie 8: Processus de nanofabrication (ISO/TS 80004
-8:2013)
Ta slovenski standard je istoveten z: CEN ISO/TS 80004-8:2015
ICS:
01.040.07 Naravoslovne in uporabne Natural and applied sciences
vede (Slovarji) (Vocabularies)
07.120 Nanotehnologije Nanotechnologies
SIST-TS CEN ISO/TS 80004-8:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TS CEN ISO/TS 80004-8:2015

---------------------- Page: 2 ----------------------

SIST-TS CEN ISO/TS 80004-8:2015

TECHNICAL SPECIFICATION
CEN ISO/TS 80004-8

SPÉCIFICATION TECHNIQUE

TECHNISCHE SPEZIFIKATION
May 2015
ICS 07.030; 01.040.07
English Version
Nanotechnologies - Vocabulary - Part 8: Nanomanufacturing
processes (ISO/TS 80004-8:2013)
Nanotechnologies - Vocabulaire - Partie 8: Processus de Nanotechnologien - Fachwörterverzeichnis - Teil 8:
nanofabrication (ISO/TS 80004-8:2013) Industrieller Nanoherstellungsprozess (ISO/TS 80004-
8:2013)
This Technical Specification (CEN/TS) was approved by CEN on 16 May 2015 for provisional application.

The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.

CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TS 80004-8:2015 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST-TS CEN ISO/TS 80004-8:2015
CEN ISO/TS 80004-8:2015 (E)
Contents
Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST-TS CEN ISO/TS 80004-8:2015
CEN ISO/TS 80004-8:2015 (E)
Foreword
The text of ISO/TS 80004-8:2013 has been prepared by Technical Committee ISO/TC 229
“Nanotechnologies” of the International Organization for Standardization (ISO) and has been taken over as
CEN ISO/TS 80004-8:2015 by Technical Committee CEN/TC 352 “Nanotechnologies” the secretariat of which
is held by AFNOR.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria, Croatia, Cyprus,
Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO/TS 80004-8:2013 has been approved by CEN as CEN ISO/TS 80004-8:2015 without any
modification.
3

---------------------- Page: 5 ----------------------

SIST-TS CEN ISO/TS 80004-8:2015

---------------------- Page: 6 ----------------------

SIST-TS CEN ISO/TS 80004-8:2015
TECHNICAL ISO/TS
SPECIFICATION 80004-8
First edition
2013-12-15
Nanotechnologies — Vocabulary —
Part 8:
Nanomanufacturing processes
Nanotechnologies — Vocabulaire —
Partie 8: Processus de nanofabrication
Reference number
ISO/TS 80004-8:2013(E)
©
ISO 2013

---------------------- Page
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 22435:2024(Main)
Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type testing (ISO 22435:2024)
kSIST FprEN ISO 22435:2024

This document specifies design, type test methods, marking and instruction requirements for cylinder valves with integrated pressure regulators (VIPRs) intended to be fitted to gas cylinders, pressure drums or tubes or used as a main valve for bundles of cylinders that convey compressed, liquefied or dissolved gases.
These are requirements for VIPRs that are in addition to those given in the relevant closure standard, for example, in ISO 10297 for cylinder valves, in ISO 17871 for quick-release cylinder valves, in ISO 17879 for self-closing cylinder valves or in ISO 23826 for ball valves. For ISO 17871, these requirements are only applicable to quick-release cylinder valves types B, C, D and E.
NOTE 1        If the pressure regulating system of a VIPR is acting as the primary valve operating mechanism, it is covered by the relevant closure standard, e.g. ISO 10297, ISO 17871, ISO 17879 and ISO 23826. This also includes designs where closure of the primary valve operating mechanism of a VIPR is obtained by closing the seat of the pressure regulating system.
NOTE 2        If the primary valve operating mechanism of a VIPR is located at the low-pressure side of the pressure regulating system, it is covered by the relevant closure standard, e.g. ISO 10297, ISO 17871, ISO 17879 and ISO 23826.
NOTE 3        The term “pressure receptacle” is used within this document to cover instances where no differentiation is necessary between gas cylinders, bundles of cylinders, pressure drums and tubes.
This document does not apply to VIPRs for
a)       medical applications (see ISO 10524-3);
b)       liquefied petroleum gas (LPG);
c)        cryogenic applications.
NOTE 4        Additional requirements for a VIPR with a residual pressure device (RPD) are specified in ISO 15996.
NOTE 5        Additional requirements for pressure relief valves can exist in international/regional regulations/ standards.

  • Draft
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17015-1:2024(Main)
Electronic Public Procurement - Catalogue - Part 1: Choreographies
kSIST FprEN 17015-1:2024

The purpose of this deliverable is to specify and describe choreographies for exchanging an electronic product catalogue (“catalogues”) as part of the business processes in the pre-award and post-award area, so that catalogues can serve as a basis for placing orders as well as evaluating tenders. The key aspects covered by this choreography specification are:
-   processes for submitting catalogues from the selling to the buying side;
-   processes for submitting catalogue-related data as part of a tendering process;
-   processes integrating sell-side procurement systems.
This document does not apply to the transactions used in the specified choreographies. These transactions are specified in EN 17015 2. The relationship between the choreographies and the transaction is described in Clause 8.
The identifier of this choreographies document is EN 17015 1:2024.
How to claim compliance to this choreography is specified in 6.2.3.

  • Draft
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO/ASTM 52927:2024(Main)
Additive manufacturing - General principles - Main characteristics and corresponding test methods (ISO/ASTM 52927:2024)
kSIST FprEN ISO/ASTM 52927:2024

This document specifies the principal requirements applied to the testing of parts produced by additive manufacturing processes.
This document
—     identifies quality characteristics for feedstock and parts and the corresponding test procedures,
—     provides the specific procedures to build specimens using additive manufacturing process, and
—     recommends the scope and content of test and supply agreements.
This document is aimed at machine manufacturers, feedstock suppliers, AM system users, part providers, and customers to facilitate the communication on main quality characteristics. It applies wherever additive manufacturing processes are used.
NOTE            It is the intent to include, in future versions of this document, other characteristics such as thermal properties, electrical requirements and physical and physico-chemical properties based upon material types.

  • Draft
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 8362-2:2024(Main)
Injection containers and accessories - Part 2: Closures for injection vials (ISO 8362-2:2024)
SIST EN ISO 8362-2:2024

This document specifies the shape, dimensions, material, performance requirements and labelling of closures for injection vials covered by ISO 8362-1 and ISO 8362-4.
The dimensional requirements are not applicable to barrier-coated closures.
Closures specified in this document are intended for single use only.
NOTE            The potency, purity, stability and safety of a medicinal product during its manufacture and storage can strongly be affected by the nature and performance of the primary packaging.

  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16739-1:2024(Main)
Industry Foundation Classes (IFC) for data sharing in the construction and facility management industries - Part 1: Data schema (ISO 16739-1:2024)
kSIST FprEN ISO 16739-1:2024

This document represents an open international standard for information used in Building Information Modeling (BIM) that is exchanged and shared among software applications used by the various participants in the construction or facility management industry sector. This document includes definitions that cover information required for buildings and infrastructure works over their life cycle. This edition of the document added coverage of information required for infrastructure facilities including bridges, roads, railways, waterways and port facilities.
This document comprises the publication of a data schema, its documentation, the property and quantity set definitions and the mechanism of an exchange file format structure.
Definitions from this document are used to support different recognized work flows in the construction and facility management industry sector, representing information deliveries. Such information deliveries can be described according to ISO 29481.
Different implementation levels of this document can be defined to better support multiple information deliveries, they are referred to as a Model View Definition (MVD). Each MVD identifies which subset of the definitions of this document imposes requirements for implementation in software applications. Conforming software applications need to identify the model view definition they conform to when applying for software certification.
The following are within the scope of this edition of this document:
BIM exchange format definitions that are required during the life cycle phases of buildings and infrastructure:
demonstrating the need;
conception of need;
outline feasibility;
substantive feasibility study and outline financial authority;
outline conceptual design;
full conceptual design;
coordinated design;
procurement and full financial authority;
production information;
construction;
operation and maintenance.
BIM exchange format definitions that are required by the various disciplines involved within the life cycle phases:
architecture and civil engineering design;
service and utilities engineering;
structural engineering;
procurement;
construction planning;
facility and utility management;
project management;
client requirement management;
industry authorities for permits and approval.
BIM exchange format definitions including:
project structure;
physical components;
spatial components;
analysis items;
processes;
resources;
controls;
actors;
context definition.

  • Draft
    406 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 2620:2024(Main)
Analysis of natural gas - Biomethane - Determination of VOCs by thermal desorption gas chromatography with flame ionization and/or mass spectrometry detectors (ISO 2620:2024)
kSIST FprEN ISO 2620:2024

This document describes a method for sampling and analysis of volatile organic compounds (VOCs), including siloxanes, terpenes, organic sulfur compounds, in natural gas and biomethane matrices, using thermal desorption gas chromatography with flame ionization and/or mass spectrometry detectors (TD-GC-FID/MS).

  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 4126-10:2024(Main)
Safety devices for protection against excessive pressure - Part 10: Sizing of safety valves and bursting discs for gas/liquid two-phase flow (ISO 4126-10:2024)
kSIST FprEN ISO 4126-10:2023

This document specifies the sizing of safety valves and bursting discs for gas/liquid two-phase flow in pressurized systems such as reactors, storage tanks, columns, heat exchangers, piping systems or transportation tanks/containers, see Figure 2. The possible fluid states at the safety device inlet that can result in two-phase flow are given in Table 1.
NOTE          The pressures used in this document are absolute pressures, not gauge pressures.

  • Draft
    84 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17294-1:2024(Main)
Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 1: General requirements (ISO 17294-1:2024)
kSIST FprEN ISO 17294-1:2023

This document specifies the principles of inductively coupled plasma mass spectrometry (ICP-MS) and provides general requirements for the use of this technique to determine elements in water, digests of sludges and sediments (e.g. digests of water as described in ISO 15587-1 or ISO 15587-2). Generally, the measurement is carried out in water, but gases, vapours or fine particulate matter can be introduced too. This document applies to the use of ICP-MS for aqueous solution analysis.
The ultimate determination of the elements is described in a separate International Standard for each series of elements and matrix. The individual clauses of this document refer the user to these guidelines for the basic principles of the method and the configuration of the instrument.

  • Draft
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17016-1:2024(Main)
Electronic Public Procurement - Ordering - Part 1: Choreographies
kSIST prEN 17016-1:2024

This choreographies document specify ordering between Buyer and Seller where the Buyer wants to reach an agreement with the Seller about an order. It specifies a series of activities that govern communication between the parties and refers to the specifications where information and rules that apply are specified.
The various possible behaviours of the Seller and Buyer subsequent to the first order communication are conveyed by variants of this choreography that are specified in 5.2.
Previous activities (e.g. cataloguing) and subsequent activities (e.g. invoicing) are outside the scope of this document. If performed electronically, their implementation is covered by other choreographies.
The identifier of this choreographies document is EN 17016-1:2024.
How to claim compliance to this choreography is specified in 5.2.3.

  • Draft
    74 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 7029:2017/A1:2024(Amendment)
Acoustics - Statistical distribution of hearing thresholds related to age and gender - Amendment 1: Correction of parameter values for estimating the hearing threshold distribution (ISO 7029:2017/Amd 1:2024)
SIST EN ISO 7029:2017/oprA1:2023
  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day