iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 1604:1996/AC:1997

(Corrigendum)

Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions

Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions

Wärmedämmstoffe für das Bauwesen - Bestimmung der Dimensionsstabilität bei definierten Temperatur- und Feuchtebedingungen

Produits isolants thermiques destinés aux applications du bâtiment - Détermination de la stabilité dimensionnelle dans des conditions de température et d'humidité spécifiées

Toplotno izolacijski proizvodi za uporabo v gradbeništvu - Preskus dimenzijske stabilnosti pri predpisani temperaturi in relativni vlažnosti zraka

General Information

Status
Withdrawn
Publication Date
14-May-1997
ICS
91.120.10 - Thermal insulation of buildings
Technical Committee
CEN/TC 88 - Thermal insulating materials and products
Drafting Committee
CEN/TC 88 - Thermal insulating materials and products
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
13-Mar-2013
Completion Date
13-Mar-2013
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
Ref Project
SIST EN 1604:1997/AC:1999 - Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions

Relations

Replaced By
EN 1604:2013 - Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions
Effective Date
20-Mar-2013
Corrects
EN 1604:1996 - Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions
Effective Date
08-Jun-2022

Buy Standard

EN 1604:1997/AC:1999EN 1604:1997/AC:1999
PreviousNext
Corrigendum
EN 1604:1997/AC:1999
English language
2 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Toplotno izolacijski proizvodi za uporabo v gradbeništvu - Preskus dimenzijske stabilnosti pri predpisani temperaturi in relativni vlažnosti zrakaWärmedämmstoffe für das Bauwesen - Bestimmung der Dimensionsstabilität bei definierten Temperatur- und FeuchtebedingungenProduits isolants thermiques destinés aux applications du bâtiment - Détermination de la stabilité dimensionne
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 16783:2024(Main)
Thermal insulation products - Environmental Product Declarations (EPD) - Product Category Rules (PCR) complementary to EN 15804 for factory made and in-situ formed products
SIST EN 16783:2024

This document provides the product category rules (PCR) for Type III environmental declarations (as in EN 15804:2012+A2:20191) for factory made and in situ thermal insulation products.
Complementary to EN 15804:2012+A2:20191, the PCR described in this document:
-   specify the declared unit to be used;
-   define the system boundaries for thermal insulation products;
-   specify/describe the default scenarios and rules for defining scenarios for certain life cycle information modules.
These PCR are intended to be used for cradle to gate, cradle to gate with options or cradle to grave assessment, provided the intention is properly stated in the system boundary description.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17886:2023(Main)
Thermal insulation products - Assessment of the susceptibility to mould growth - Laboratory test method
SIST EN 17886:2024

This document describes a laboratory test method to determine the susceptibility of thermal insulation products used for construction against mould growth under specified climatic conditions.
The method is applicable to both factory-made products and in situ formed products. Factory-made products include panels, mats and rolls.
NOTE   In situ formed products are usually those that are delivered loose and installed by blowing-in, pouring, or spraying-on, eventually using water and/or binder, whether or not they are also treated using additives.
The test is carried out with one of the conditions described in Table 1.
This test method determines the susceptibility of a thermal insulation material to mould growth, but it does not determine the suitability for use in a given design (wall, roof, etc.).
This method does not predict the resistance of an insulation product to water damage.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18393-1:2023(Main)
Thermal insulation products - Determination of settlement - Part 1: Loose-fill insulation for ventilated attics simulating humidity and temperature cycling (ISO 18393-1:2023)
SIST EN ISO 18393-1:2024

This document specifies a test method for the determination of settlement of loose-fill insulation applied horizontally in ventilated attics. This test method measures the effects of humidity and temperature cycling.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 9229:2020(Main)
Thermal insulation - Vocabulary (ISO 9229:2020)
SIST EN ISO 9229:2020

This document provides a vocabulary of terms used in the field of thermal insulation that covers materials, products, components and applications. Some of the terms can have a different meaning when used in other industries or applications.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1603:2013(Main)
Thermal insulating products for building applications - Determination of dimensional stability under constant normal laboratory conditions (23 °C/ 50 % relative humidity)
SIST EN 1603:2013

This European Standard specifies the equipment and procedures to evaluate irreversible dimensional changes of test specimens and full size products with time under constant normal laboratory conditions. It is applicable to thermal insulating products.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1604:2013(Main)
Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions
SIST EN 1604:2013

This European Standard specifies the equipment and procedures for evaluating dimensional changes of test specimens under specified conditions of temperature, relative humidity and duration of exposure. This European Standard proposes a range of conditions from which one or more desirable test conditions can be selected. It is applicable to thermal insulating products.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12430:2013(Main)
Thermal insulating products for building applications - Determination of behaviour under point load
SIST EN 12430:2013

This European Standard specifies equipment and procedures for determining the behaviour of products under a force applied to a small area of a test specimen at a given speed. It is applicable to thermal insulating products.
This European Standard can be used to determine whether the products have sufficient strength to withstand forces applied directly to them either during installation or during application, mainly caused by pedestrian traffic.
NOTE   The test methods given in the main body of the standard and in Annex A are reported and interpreted in different ways. The similarities that exist between the methods are not sufficient to permit reasonable comparisons to be made.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1605:2013(Main)
Thermal insulating products for building applications - Determination of deformation under specified compressive load and temperature conditions
SIST EN 1605:2013

This European Standard specifies the equipment and procedures for determining the deformation occurring under specified conditions of compressive load, temperature and time. It is applicable to thermal insulating products.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1607:2013(Main)
Thermal insulating products for building applications - Determination of tensile strength perpendicular to faces
SIST EN 1607:2013

This European Standard specifies the equipment and procedures for determining the tensile strength of a product perpendicular to its faces. It is applicable to thermal insulating products.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12429:1998(Main)
Thermal insulating products for building applications - Conditioning to moisture equilibrium under specified temperature and humidity conditions
SIST EN 12429:1999

This European standard specifies equipment and procedures to condition a thermal insulating product to equilibrium moisture content at (23+/-2)°C and (50+/-5)% relative humidity. The standard is also applicable to thermal insulating products with moulded skins but is not normally relevant for faced products or for products with other surface treatments.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day