EN ISO 18594:2007

Resistance spot-, projection- and seam-welding - Method for determining the transition resistance on aluminium and steel material (ISO 18594:2007)

ISO 18594:2007 specifies the procedure and the experimental set-up for determining the transition resistance of a single sheet or two overlapping sheets of aluminium or steel, with or without surface treatment, and with or without surface coating.

Widerstandspunkt-, Buckel- und Rollennahtschweißen - Verfahren für das Bestimmen des Übergangswiderstands von Aluminium- und Stahlwerkstoffen (ISO 18594:2007)

Diese Internationale Norm  legt das Messverfahren und die Messeinrichtung zur Bestimmung des Übergangswiderstandes an Einzelblechen oder an zwei sich überlappenden Blechen aus Stahl- oder Aluminiumwerkstoffen mit oder ohne Oberflächenvorbehandlung sowie mit oder ohne Oberflächenveredelung fest.

Soudage par résistance par points, par bossage et à la molette - Méthode pour la détermination de la résistance de transition sur l'aluminium et sur l'acier (ISO 18594:2007)

L'ISO 18594:2007 spécifie le mode opératoire et le montage expérimental permettant de déterminer la résistance de transition d'une tôle ou de deux tôles minces en aluminium ou en acier avec ou sans traitement de surface et avec ou sans revêtement.

Točkovno, bradavičasto in kolutno uporovno varjenje – Metoda določanja prehodne upornosti na aluminiju in jeklu (ISO 18594:2007)

General Information

• Status: Published
• Publication Date: 28-Feb-2007
• Withdrawal Date: 29-Sep-2007
• ICS: 25.160.10 - Welding processes
• Technical Committee: CEN/TC 121 - Welding
• Drafting Committee: CEN/TC 121/SC 4 - Quality management in the field of welding
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 01-Mar-2007
• Completion Date: 01-Mar-2007
• Ref Project: SIST EN ISO 18594:2007 - Resistance spot-, projection- and seam-welding - Method for determining the transition resistance on aluminium and steel material (ISO 18594:2007)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 18594:2007
01-julij-2007
7RþNRYQREUDGDYLþDVWRLQNROXWQRXSRURYQRYDUMHQMH±0HWRGDGRORþDQMD
SUHKRGQHXSRUQRVWLQDDOXPLQLMXLQMHNOX,62
Resistance spot-, projection- and seam-welding - Method for determining the transition
resistance on aluminium and steel material (ISO 18594:2007)
Widerstandspunkt-, Buckel- und Rollennahtschweißen - Verfahren für das Bestimmen
des Übergangswiderstands von Aluminium- und Stahlwerkstoffen (ISO 18594:2007)
Soudage par résistance par points, par bossage et a la molette - Méthode pour la
détermination de la résistance de transition sur l'aluminium et sur l'acier (ISO
18594:2007)
Ta slovenski standard je istoveten z: EN ISO 18594:2007
ICS:
25.160.10 Varilni postopki in varjenje Welding processes
77.080.10 Železo Irons
77.120.10 Aluminij in aluminijeve zlitine Aluminium and aluminium
alloys
SIST EN ISO 18594:2007 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 18594:2007

---------------------- Page: 2 ----------------------

SIST EN ISO 18594:2007
EUROPEAN STANDARD
EN ISO 18594
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2007
ICS 25.160.10

English Version
Resistance spot-, projection- and seam-welding - Method for
determining the transition resistance on aluminium and steel
material (ISO 18594:2007)
Soudage par résistance par points, par bossage et à la Widerstandspunkt-, Buckel- und Rollennahtschweißen -
molette - Méthode pour la détermination de la résistance de Verfahren für das Bestimmen des Übergangswiderstands
transition sur l'aluminium et sur l'acier (ISO 18594:2007) von Aluminium- und Stahlwerkstoffen (ISO 18594:2007)
This European Standard was approved by CEN on 17 February 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 18594:2007: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 18594:2007

EN ISO 18594:2007 (E)





Foreword


This document (EN ISO 18594:2007) has been prepared by Technical Committee ISO/TC 44
"Welding and allied processes" in collaboration with Technical Committee CEN/TC 121
"Welding", the secretariat of which is held by DIN.

This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by September 2007, and conflicting national
standards shall be withdrawn at the latest by September 2007.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United
Kingdom.


Endorsement notice

The text of ISO 18594:2007 has been approved by CEN as EN ISO 18594:2007 without any
modifications.

2

---------------------- Page: 4 ----------------------

SIST EN ISO 18594:2007

INTERNATIONAL ISO
STANDARD 18594
First edition
2007-03-01

Resistance spot-, projection- and seam-
welding — Method for determining the
transition resistance on aluminium and
steel material
Soudage par résistance par points, par bossages et à la molette —
Méthode pour la détermination de la résistance de transition sur
l'aluminium et sur l'acier




Reference number
ISO 18594:2007(E)
©
ISO 2007

---------------------- Page: 5 ----------------------

SIST EN ISO 18594:2007
ISO 18594:2007(E)
PDF disclaimer
This PDF file may contain embedded typefa
...