EN 17104:2021
(Main)Thermoplastics rigid protective wallcovering panels for internal use in buildings - Performance characteristics
Thermoplastics rigid protective wallcovering panels for internal use in buildings - Performance characteristics
This document specifies characteristics for thermoplastics rigid protective wallcovering panels whose purposes are decorative and protective, but non-structural.
The thermoplastics rigid protective wallcovering panels are intended to be used as finishes for hanging onto internal walls and wall partitions by means of adhesive. Their surface may be with or without embossing.
It also specifies the procedures for the assessment and verification of constancy of performance (AVCP) of the thermoplastics rigid protective wallcovering panels.
This document does not cover thermoplastics rigid protective wallcovering panels:
- fixed onto internal walls and wall partitions by other means than by adhesives, as well as the adhesives and ancillary products themselves,
- intended to be used on ceilings.
Kunststoff-Wandschutzplatten für die Anwendung in Gebäuden - Leistungsmerkmale
Dieses Dokument legt Merkmale für Kunststoff-Wandschutzplatten fest, deren Zwecke dekorativ und schützend, aber nicht strukturell sind.
Die Kunststoff-Wandschutzplatten sollen als Verkleidungen zum Anbringen mittels Klebstoff an Innenwänden und Trennwänden verwendet werden. Ihre Oberfläche kann mit oder ohne Prägung gestaltet sein.
Ferner legt dieses Dokument Methoden für die Bewertung und Überprüfung der Leistungsbeständigkeit (en: assessment and verification of constancy of performance, AVCP) der Kunststoff-Wandschutzplatten fest.
Dieses Dokument behandelt keine Kunststoff-Wandschutzplatten,
- die mit anderen Mitteln als mit Klebstoff an Innenwänden und Trennwänden befestigt werden, sowie die Klebe- und Zubehörprodukte selbst;
- die für die Anwendung an Decken vorgesehen sind.
Panneaux de protection murale rigides en thermoplastiques pour usage intérieur dans le bâtiment - Caractéristiques de performance
Le présent document spécifie les caractéristiques des panneaux de protection murale rigides en thermoplastiques utilisés pour la décoration et pour la protection, sans rôle structurel.
Les panneaux de protection murale rigides en thermoplastiques sont destinés à être utilisés comme finitions accrochées sur les murs intérieurs et les cloisons au moyen d’une colle. Leur surface peut comporter ou non un grainage.
Il spécifie également les procédures d’évaluation et de vérification de la constance des performances (EVCP) des panneaux de protection murale rigides en thermoplastiques.
Le présent document ne traite pas des panneaux de protection murale rigides en thermoplastiques:
- fixés sur les murs intérieurs et les cloisons par d'autres moyens que par des adhésifs, ainsi que des adhésifs et produits auxiliaires eux-mêmes,
- destinés à être utilisés sur des plafonds.
Plastomerne toge zaščitne stenske obloge za notranjo uporabo v stavbah - Tehnične lastnosti
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 17104:2021
01-marec-2021
Plastomerne toge zaščitne stenske obloge za notranjo uporabo v stavbah -
Tehnične lastnosti
Thermoplastics rigid protective wallcovering panels for internal use in buildings -
Performance characteristics
Kunststoff-Wandschutzplatten für die Anwendung in Gebäuden - Leistungskenngrößen
Panneaux de protection murale rigides en thermoplastiques pour usage intérieur dans le
bâtiment - Caractéristiques de performance
Ta slovenski standard je istoveten z: EN 17104:2021
ICS:
83.140.10 Filmi in folije Films and sheets
91.180 Notranja zaključna dela Interior finishing
SIST EN 17104:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 17104:2021
---------------------- Page: 2 ----------------------
SIST EN 17104:2021
EN 17104
EUROPEAN STANDARD
NORME EUROPÉENNE
January 2021
EUROPÄISCHE NORM
ICS 83.140.10
English Version
Thermoplastics rigid protective wallcovering panels for
internal use in buildings - Performance characteristics
Panneaux de protection murale rigides en Kunststoff-Wandschutzplatten für die Anwendung in
thermoplastiques pour usage intérieur dans le Gebäuden - Leistungsmerkmale
bâtiment - Caractéristiques de performance
This European Standard was approved by CEN on 27 December 2020.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17104:2021 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 17104:2021
EN 17104:2021 (E)
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 Characteristics . 7
4.1 Reaction to fire . 7
4.2 Emission of dangerous substances into indoor air . 8
4.2.1 General . 8
4.2.2 Emissions of volatile organic compounds (VOC) with exception of formaldehyde . 8
4.2.3 Emission of formaldehyde . 8
4.3 Migration of heavy metals . 9
4.4 Impact resistance .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.