iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 7083:2021

(Main)

Technical product documentation - Symbols used in technical product documentation - Proportions and dimensions (ISO 7083:2021)

Technical product documentation - Symbols used in technical product documentation - Proportions and dimensions (ISO 7083:2021)

This document specifies the recommended proportions for the symbols used in technical product documentation. It gives recommended dimensions based on the grid related to the line width to be used.
This document does not apply to symbols used in process plant documentation, which are covered in ISO 81714-1.
The proportions of the symbols are based on the standard heights of lettering given in ISO 3098-1.

Technische Produktdokumentation - Symbole für die Technische Produktdokumentation - Größenverhältnisse und Maße (ISO 7083:2021)

Dieses Dokument legt empfohlene Größenverhältnisse für die graphischen Symbole in der technischen Produktdokumentation fest. Es gibt empfohlene Maße auf Grundlage eines Rasters in Bezug auf die zu verwendende Linienbreite an.
Dieses Dokument ist nicht anzuwenden für Symbole, die in der Dokumentation für verfahrenstechnische Anlagen verwendet werden. Diese werden in ISO 81714 1 behandelt.
Die Größenverhältnisse der graphischen Symbole sind auf die in ISO 3098 1 festgelegten Schrifthöhen bezogen.

Documentation technique de produits - Symboles utilisés dans la documentation technique de produits - Proportions et dimensions (ISO 7083:2021)

Le présent document spécifie les proportions recommandées pour les symboles utilisés dans la documentation technique de produits. Il donne des dimensions recommandées en fonction de la grille liée à la largeur de trait à utiliser.
Le présent document ne s’applique pas aux symboles utilisés dans la documentation des installations de procédé qui sont couverts dans l’ISO 81714-1.
Les proportions des symboles sont basées sur les hauteurs standard d’écriture données dansl’ISO 3098‑1.

Tehnična dokumentacija izdelkov - Simboli za uporabo v tehnični dokumentaciji izdelkov - Sorazmerja in mere (ISO 7083:2021)

General Information

Status
Published
Publication Date
25-May-2021
Withdrawal Date
29-Nov-2021
ICS
01.100.01 - Technical drawings in general
01.100.20 - Mechanical engineering drawings
Technical Committee
CEN/SS F01 - Technical drawings
Drafting Committee
CEN/SS F01 - Technical drawings
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
26-May-2021
Completion Date
26-May-2021
Ref Project
SIST EN ISO 7083:2021 - Technical product documentation - Symbols used in technical product documentation - Proportions and dimensions (ISO 7083:2021)

Relations

Replaces
EN ISO 7083:1994 - Technical drawings - Symbols for geometrical tolerancing - Proportions and dimensions (ISO 7083:1983)
Effective Date
02-Jun-2021

Buy Standard

EN ISO 7083:2021EN ISO 7083:2021
PreviousNext
Standard
EN ISO 7083:2021
English language
109 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 7083:2021
01-september-2021
Nadomešča:
SIST EN ISO 7083:2001
Tehnična dokumentacija izdelkov - Simboli za uporabo v tehnični dokumentaciji
izdelkov - Sorazmerja in mere (ISO 7083:2021)
Technical product documentation - Symbols used in technical product documentation -
Proportions and dimensions (ISO 7083:2021)
Technische Produktdokumentation - Symbole für die Technische Produktdokumentation -
Größenverhältnisse und Maße (ISO 7083:2021)
Documentation technique de produits - Symboles utilisés dans la documentation
technique de produits - Proportions et dimensions (ISO 7083:2021)
Ta slovenski standard je istoveten z: EN ISO 7083:2021
ICS:
01.100.01 Tehnično risanje na splošno Technical drawings in general
01.110 Tehnična dokumentacija za Technical product
izdelke documentation
SIST EN ISO 7083:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 7083:2021

---------------------- Page: 2 ----------------------
SIST EN ISO 7083:2021


EN ISO 7083
EUROPEAN STANDARD

NORME EUROPÉENNE

May 2021
EUROPÄISCHE NORM
ICS 01.100.20 Supersedes EN ISO 7083:1994
English Version

Technical product documentation - Symbols used in
technical product documentation - Proportions and
dimensions (ISO 7083:2021)
Documentation technique de produits - Symboles Technische Produktdokumentation - Symbole für die
utilisés dans la documentation technique de produits - Technische Produktdokumentation -
Proportions et dimensions (ISO 7083:2021) Größenverhältnisse und Maße (ISO 7083:2021)
This European Standard was approved by CEN on 24 April 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 7083:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 7083:2021
EN ISO 7083:2021 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 7083:2021
EN ISO 7083:2021 (E)
European foreword
This document (EN ISO 7083:2021) has been prepared by Technical Committee ISO/TC 10 "Technical
product documentation" in collaboration with CCMC.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2021, and conflicting national standards
shall be withdrawn at the latest by November 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 7083:1994.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 7083:2021 has been approved by CEN as EN ISO 7083:2021 without any modification.


3

---------------------- Page: 5 ----------------------
SIST EN ISO 7083:2021

---------------------- Page: 6 ----------------------
SIST EN IS
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 13715:2019(Main)
Technical product documentation - Edges of undefined shape - Indication and dimensioning (ISO 13715:2017)
SIST EN ISO 13715:2019

ISO 13715:2017 specifies rules for the indication and dimensioning of undefined edges in technical product and dimensions. The proportions and dimensions of the graphical symbols to be used are also specified.
In cases where the geometrically defined shape of an edge (for example, 1 × 45°) is required, the general dimensioning principles given in ISO 129‑1 apply.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18388:2019(Main)
Technical product documentation (TPD) - Relief grooves - Types and dimensioning (ISO 18388:2016)
SIST EN ISO 18388:2019

ISO 18388:2016 specifies a series of relief grooves for shafts and holes, intended for general use in mechanical engineering.
It also intends to avoid unnecessary multiplicity of tools by a restricted selection of groove-types and dimensional versions.
NOTE          The shape and the dimensions of the relief grooves type G and H correspond with the "Indexable hard material inserts" according to ISO 6987.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 13715:2019(Main)
Technical product documentation - Edges of undefined shape - Indication and dimensioning (ISO 13715:2017)
SIST EN ISO 13715:2019

ISO 13715:2017 specifies rules for the indication and dimensioning of undefined edges in technical product and dimensions. The proportions and dimensions of the graphical symbols to be used are also specified.
In cases where the geometrically defined shape of an edge (for example, 1 × 45°) is required, the general dimensioning principles given in ISO 129‑1 apply.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18388:2019(Main)
Technical product documentation (TPD) - Relief grooves - Types and dimensioning (ISO 18388:2016)
SIST EN ISO 18388:2019

ISO 18388:2016 specifies a series of relief grooves for shafts and holes, intended for general use in mechanical engineering.
It also intends to avoid unnecessary multiplicity of tools by a restricted selection of groove-types and dimensional versions.
NOTE          The shape and the dimensions of the relief grooves type G and H correspond with the "Indexable hard material inserts" according to ISO 6987.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 5458:2018(Main)
Geometrical product specifications (GPS) - Geometrical tolerancing - Pattern and combined geometrical specification (ISO 5458:2018)
SIST EN ISO 5458:2018

This document establishes complementary rules to ISO 1101 to be applied to pattern specifications and defines rules to combine individual specifications, for geometrical specifications e.g. using the symbols POSITION, SYMMETRY, LINE PROFILE and SURFACE PROFILE, as well as STRAIGHTNESS (in the case where the toleranced features are nominally coaxial) and FLATNESS (in the case where the toleranced features are nominally coplanar) as listed in Annex C.
These rules apply when a set of tolerance zones are grouped together with location or orientation constraints, through the use of the CZ, CZR or SIM modifiers.
This document does not cover the use of the pattern specifications when the least and maximum material requirement is applied (see ISO 2692).
This document does not cover the establishment of common datum (see ISO 5459) based on pattern features.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 22435:2024(Main)
Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type testing (ISO 22435:2024)
kSIST FprEN ISO 22435:2024

This document specifies design, type test methods, marking and instruction requirements for cylinder valves with integrated pressure regulators (VIPRs) intended to be fitted to gas cylinders, pressure drums or tubes or used as a main valve for bundles of cylinders that convey compressed, liquefied or dissolved gases.
These are requirements for VIPRs that are in addition to those given in the relevant closure standard, for example, in ISO 10297 for cylinder valves, in ISO 17871 for quick-release cylinder valves, in ISO 17879 for self-closing cylinder valves or in ISO 23826 for ball valves. For ISO 17871, these requirements are only applicable to quick-release cylinder valves types B, C, D and E.
NOTE 1        If the pressure regulating system of a VIPR is acting as the primary valve operating mechanism, it is covered by the relevant closure standard, e.g. ISO 10297, ISO 17871, ISO 17879 and ISO 23826. This also includes designs where closure of the primary valve operating mechanism of a VIPR is obtained by closing the seat of the pressure regulating system.
NOTE 2        If the primary valve operating mechanism of a VIPR is located at the low-pressure side of the pressure regulating system, it is covered by the relevant closure standard, e.g. ISO 10297, ISO 17871, ISO 17879 and ISO 23826.
NOTE 3        The term “pressure receptacle” is used within this document to cover instances where no differentiation is necessary between gas cylinders, bundles of cylinders, pressure drums and tubes.
This document does not apply to VIPRs for
a)       medical applications (see ISO 10524-3);
b)       liquefied petroleum gas (LPG);
c)        cryogenic applications.
NOTE 4        Additional requirements for a VIPR with a residual pressure device (RPD) are specified in ISO 15996.
NOTE 5        Additional requirements for pressure relief valves can exist in international/regional regulations/ standards.

  • Draft
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17015-1:2024(Main)
Electronic Public Procurement - Catalogue - Part 1: Choreographies
kSIST FprEN 17015-1:2024

The purpose of this deliverable is to specify and describe choreographies for exchanging an electronic product catalogue (“catalogues”) as part of the business processes in the pre-award and post-award area, so that catalogues can serve as a basis for placing orders as well as evaluating tenders. The key aspects covered by this choreography specification are:
-   processes for submitting catalogues from the selling to the buying side;
-   processes for submitting catalogue-related data as part of a tendering process;
-   processes integrating sell-side procurement systems.
This document does not apply to the transactions used in the specified choreographies. These transactions are specified in EN 17015 2. The relationship between the choreographies and the transaction is described in Clause 8.
The identifier of this choreographies document is EN 17015 1:2024.
How to claim compliance to this choreography is specified in 6.2.3.

  • Draft
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO/ASTM 52927:2024(Main)
Additive manufacturing - General principles - Main characteristics and corresponding test methods (ISO/ASTM 52927:2024)
kSIST FprEN ISO/ASTM 52927:2024

This document specifies the principal requirements applied to the testing of parts produced by additive manufacturing processes.
This document
—     identifies quality characteristics for feedstock and parts and the corresponding test procedures,
—     provides the specific procedures to build specimens using additive manufacturing process, and
—     recommends the scope and content of test and supply agreements.
This document is aimed at machine manufacturers, feedstock suppliers, AM system users, part providers, and customers to facilitate the communication on main quality characteristics. It applies wherever additive manufacturing processes are used.
NOTE            It is the intent to include, in future versions of this document, other characteristics such as thermal properties, electrical requirements and physical and physico-chemical properties based upon material types.

  • Draft
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 8362-2:2024(Main)
Injection containers and accessories - Part 2: Closures for injection vials (ISO 8362-2:2024)
SIST EN ISO 8362-2:2024

This document specifies the shape, dimensions, material, performance requirements and labelling of closures for injection vials covered by ISO 8362-1 and ISO 8362-4.
The dimensional requirements are not applicable to barrier-coated closures.
Closures specified in this document are intended for single use only.
NOTE            The potency, purity, stability and safety of a medicinal product during its manufacture and storage can strongly be affected by the nature and performance of the primary packaging.

  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16739-1:2024(Main)
Industry Foundation Classes (IFC) for data sharing in the construction and facility management industries - Part 1: Data schema (ISO 16739-1:2024)
kSIST FprEN ISO 16739-1:2024

This document represents an open international standard for information used in Building Information Modeling (BIM) that is exchanged and shared among software applications used by the various participants in the construction or facility management industry sector. This document includes definitions that cover information required for buildings and infrastructure works over their life cycle. This edition of the document added coverage of information required for infrastructure facilities including bridges, roads, railways, waterways and port facilities.
This document comprises the publication of a data schema, its documentation, the property and quantity set definitions and the mechanism of an exchange file format structure.
Definitions from this document are used to support different recognized work flows in the construction and facility management industry sector, representing information deliveries. Such information deliveries can be described according to ISO 29481.
Different implementation levels of this document can be defined to better support multiple information deliveries, they are referred to as a Model View Definition (MVD). Each MVD identifies which subset of the definitions of this document imposes requirements for implementation in software applications. Conforming software applications need to identify the model view definition they conform to when applying for software certification.
The following are within the scope of this edition of this document:
BIM exchange format definitions that are required during the life cycle phases of buildings and infrastructure:
demonstrating the need;
conception of need;
outline feasibility;
substantive feasibility study and outline financial authority;
outline conceptual design;
full conceptual design;
coordinated design;
procurement and full financial authority;
production information;
construction;
operation and maintenance.
BIM exchange format definitions that are required by the various disciplines involved within the life cycle phases:
architecture and civil engineering design;
service and utilities engineering;
structural engineering;
procurement;
construction planning;
facility and utility management;
project management;
client requirement management;
industry authorities for permits and approval.
BIM exchange format definitions including:
project structure;
physical components;
spatial components;
analysis items;
processes;
resources;
controls;
actors;
context definition.

  • Draft
    406 pages
    English language
    sale 10% off
    e-Library read for
    1 day