Public swimming pools - Computer vision systems for the detection of drowning accidents in swimming pools - Safety requirements and test methods (ISO 20380:2017)

ISO 20380:2017 describes the minimum operational, performance and safety requirements and test methods for computer vision systems used to detect drowning accidents.
ISO 20380:2017 does not apply to the systems used in domestic swimming pools and pool basins with a surface area of less than 150 m2.

Öffentliche Schwimmbäder - Computererkennungssysteme für das Erkennen von Ertrinkungsunfällen in Schwimmbädern - Sicherheitstechnische Anforderungen und Prüfverfahren (ISO 20380:2017)

Diese Norm beschreibt die Mindestanforderungen an Betrieb, Leistung und Sicherheit von Computersystemen für die Erkennung von Ertrinkungsunfällen in Schwimmbädern und entsprechende Prüfverfahren.
Diese Norm gilt nicht für Systeme, die in privat genutzten Schwimmbädern eingesetzt werden, und Becken mit einer Oberfläche von weniger als 150 m2.

Piscines publiques - Systèmes de vision par ordinateur pour la détection de noyades en piscines - Exigences de sécurité et méthodes d'essai (ISO 20380:2017)

L'ISO 20380 :2017 décrit les exigences minimales de fonctionnement, de performance et de sécurité et les méthodes d'essai des systèmes de vision par ordinateur utilisés pour la détection des noyades.
L'ISO 20380 :2017 ne s'applique pas aux systèmes utilisés dans les piscines à usage domestique et dans les bassins dont la surface est inférieure à 150 m2.

Javna kopališča - Računalniški sistemi za odkrivanje primerov utopitve v bazenih kopališč - Varnostne zahteve in preskusne metode (ISO 20380:2017)

Ta evropski standard bi moral opisovati splošne varnostne zahteve in preskusne metode za računalniške sisteme za odkrivanje primerov utopitve v bazenih kopališč. Ta standard se ne uporablja za sisteme, ki se uporabljajo v domačih bazenih in bazenih s površino manjšo od 150 m2.

General Information

Status
Published
Publication Date
12-Dec-2017
Withdrawal Date
29-Jun-2018
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
13-Dec-2017
Due Date
15-Oct-2017
Completion Date
13-Dec-2017

Buy Standard

Standard
EN ISO 20380:2018
English language
24 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 20380:2018
01-februar-2018
-DYQDNRSDOLãþD5DþXQDOQLãNLVLVWHPL]DRGNULYDQMHSULPHURYXWRSLWYHYED]HQLK
NRSDOLãþ9DUQRVWQH]DKWHYHLQSUHVNXVQHPHWRGH ,62
Public swimming pools - Computer vision systems for the detection of drowning
accidents in swimming pools - Safety requirements and test methods (ISO 20380:2017)
Öffentliche Schwimmbäder - Computererkennungssysteme für das Erkennen von
Ertrinkungsunfällen in Schwimmbädern - Sicherheitstechnische Anforderungen und
Prüfverfahren (ISO 20380:2017)
Piscines publiques - Systèmes de vision par ordinateur pour la détection de noyades en
piscines - Exigences de sécurité et méthodes d'essai (ISO 20380:2017)
Ta slovenski standard je istoveten z: EN ISO 20380:2017
ICS:
35.240.99 8SRUDEQLãNHUHãLWYH,7QD IT applications in other fields
GUXJLKSRGURþMLK
97.220.10 Športni objekti Sports facilities
SIST EN ISO 20380:2018 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 20380:2018

---------------------- Page: 2 ----------------------

SIST EN ISO 20380:2018


EN ISO 20380
EUROPEAN STANDARD

NORME EUROPÉENNE

December 2017
EUROPÄISCHE NORM
ICS 35.240.99; 97.220.10
English Version

Public swimming pools - Computer vision systems for the
detection of drowning accidents in swimming pools -
Safety requirements and test methods (ISO 20380:2017)
Piscines publiques - Systèmes de vision par ordinateur Öffentliche Schwimmbäder -
pour la détection de noyades en piscines - Exigences de Computererkennungssysteme für das Erkennen von
sécurité et méthodes d'essai (ISO 20380:2017) Ertrinkungsunfällen in Schwimmbädern -
Sicherheitstechnische Anforderungen und
Prüfverfahren (ISO 20380:2017)
This European Standard was approved by CEN on 9 October 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 20380:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 20380:2018
EN ISO 20380:2017 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 20380:2018
EN ISO 20380:2017 (E)
European foreword
This document (EN ISO 20380:2017) has been prepared by Technical Committee ISO/TC 83 "Sports and
other recreational facilities and equipment" in collaboration with Technical Committee CEN/TC 136
“Sports, playground and other recreational facilities and equipment” the secretariat of which is held by
DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2018, and conflicting national standards shall be
withdrawn at the latest by June 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Swede
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.