EN 15355:2008

Railway applications - Braking - Distributor valves and distributor-isolating devices

This European Standard applies to distributor valves and distributor-isolating devices.
The distributor valves contained in this European Standard are of graduated release type. Direct release types are not included.
Functionally they are regarded as not containing relay valves of any type, even if the relay valves are physically an integral part of the distributor valves.
This European Standard applies to both distributor-isolating devices mounted separate from the distributor valve and distributor-isolating devices integral with the distributor valve.
This European Standard specifies the requirements for the design, testing and quality assurance of distributor valves and distributor-isolating devices.
For interoperable freight wagons, these devices which are operated by compressed air according to EN 14198 are assessed according to the respective technical specification of interoperability.

Bahnanwendungen - Bremse - Steuerventile und Bremsabsperreinrichtungen

Dieses Dokument gilt für Steuerventile, die nach den TSI Spezifikationen als Interoperabilitätskomponenten für Druckluftbremsen von interoperablen Schienenfahrzeugen, die durch Druckluft betätigt werden, bewertet werden.
Die Steuerventile, wie sie in diesem Dokument enthalten sind, sind von mehrlösiger Bauart. Einlösige Ventile werden nicht behandelt.
Die Betrachtung der Funktionen erfolgt so als ob kein Relaisventil enthalten wäre, auch wenn die Relaisventile physikalisch in das Steuerventil integriert sein können.
Dieses Dokument definiert die Anforderungen an Konstruktion, Abmessungen, Prüfung und Qualitätssicherung des Steuerventiles. Diese Anforderungen können nicht ausreichend genau beschrieben werden, um die fachgerechte Herstellung oder zweckmäßige Konstruktion sicherzustellen. Daher ist jeder Hersteller dafür verantwortlich, alle notwendigen Schritte zu unternehmen, die die Qualität von Konstruktion, Bearbeitung und Herstellung im Einklang mit fachgerechter Ingenieurspraxis sowie ausreichender Fertigungsqualität sicherstellen.

Applications ferroviaires - Freinage - Distributeurs de freinage et robinet d'isolement

Le présent document s’applique aux distributeurs de freinage et aux robinets d’isolement.
Les distributeurs de freinage décrits dans la présente norme européenne sont de type à desserrage gradué. Les types à desserrage direct ne sont pas couverts.
Sur un plan fonctionnel, ils sont considérés comme ne comportant pas de relais pneumatique d’aucune sorte, même si les relais pneumatiques font partie intégrante des distributeurs de freinage.
La présente norme européenne s’applique aux robinets d’isolements montés séparément du distributeur de freinage ainsi qu’aux robinets d’isolement intégrés au distributeur de freinage.
Elle spécifie les exigences à respecter pour la conception, les essais et l’assurance qualité des distributeurs de freinage et des robinets d’isolement.
Pour les wagons de marchandises interopérables, ces dispositifs fonctionnant à l’air comprimé conformément à l’EN 14198, sont évalués selon les Spécifications Techniques d’Interopérabilité concernées.

Železniške naprave - Zavore - Krmilni ventili in naprave za ločitev krmilnih ventilov od zavornega voda

General Information

• Status: Withdrawn
• Publication Date: 21-Oct-2008
• Withdrawal Date: 05-Oct-2010
• ICS: 45.060.01 - Railway rolling stock in general
• Technical Committee: CEN/TC 256 - Railway applications
• Drafting Committee: CEN/TC 256/SC 3/WG 24 - Components
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 06-Oct-2010
• Completion Date: 06-Oct-2010
• Directive: 2001/16/EC - Directive 2001/16/EC of the European Parliament and of the Council of 19 March 2001 on the interoperability of the trans-European conventional rail system
• Directive: 93/38/EEC - Procurement procedures of entities operating in the water, energy, transport and telecommunications sectors
• Directive: 96/48/EC - Interoperability of the trans-European high-speed rail system
• Mandate: M/024 - Mandate to CEN/CENELEC/ETSI for programming and standardization in the field of railway equipment
• Mandate: M/275 - Mandate to CEN/CENELEC/ETSI for standardization in the field of railway equipment on the interoperability of the Trans-European high-speed rail system
• Mandate: M/334 - Mandate for programming and standardisation addressed to CEN, CENELEC and ETSI in the field of the Interoperability of the trans-european conventional rail system
• Ref Project: SIST EN 15355:2008 - Railway applications - Braking - Distributor valves and distributor-isolating devices

Relations

• Merged Into: EN 15355:2008+A1:2010 - Railway applications - Braking - Distributor valves and distributor-isolating devices
• Effective Date: 14-Aug-2010
• Amended By: EN 15355:2008/FprA1 - Railway applications - Braking - Distributor valves and distributor-isolating devices
• Effective Date: 12-Dec-2009

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bahnanwendungen - Bremse - Steuerventile und BremsabsperrhähneApplications ferroviaires - Freinage - Distributeur de freinage et robinet d'isolmentRailway applications - Braking - Distributor valves and distributor-isolating devices45.040Materiali in deli za železniško tehnikoMaterials and components for railway engineeringICS:Ta slovenski standard je istoveten z:EN 15355:2008SIST EN 15355:2008en,fr01-december-2008SIST EN 15355:2008SLOVENSKI
STANDARD



SIST EN 15355:2008



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 15355October 2008ICS 45.060.01 English VersionRailway applications - Braking - Distributor valves anddistributor-isolating devicesApplications ferroviaires - Freinage - Distributeurs defreinage et robinet d'isolementBahnanwendungen - Bremse - Steuerventile undBremsabsperrhähneThis European Standard was approved by CEN on 24 August 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15355:2008: ESIST EN 15355:2008



EN 15355:2008 (E) 2 Contents Page Foreword.5 1 Scope.6 2 Normative references.6 3 Symbols, abbreviations, terms and definitions.6 3.1 Symbols.6 3.2 Abbreviations.7 3.3 Terms and definitions.7 4 Design and manufacture.16 4.1 General.16 4.2 Functional requirements.16 4.3 Control volume (control chamber).16 4.4 Pilot volume and product classification.16 4.5 Shock and vibration.16 4.6 Service life.16 4.7 Compressed air quality.16 4.8 Ambient temperature.17 4.9 Altitude.17 4.10 Humidity.
...