CEN/TS 15210-1:2005

Solid biofuels - Methods for the determination of mechanical durability of pellets and briquettes - Part 1: Pellets

This working document aims to define the requirements and method used for testing the mechanical durability of pellets. It is intended for persons and organisations that manufacture, plan, sell, erect or use machinery, equipment, tools and entire plants related to such pellets, and to all persons and organisations involved in producing, purchasing, selling and utilising pellets.
The durability is the measure of the resistance of densified fuels towards shocks and/or abrasion in consequence of handling and transportation processes.

Feste Biobrennstoffe - Verfahren zur Bestimmung der mechanischen Festigkeit von Pellets und Briketts - Teil 1: Pellets

Dieses Dokument legt die Anforderungen und Verfahren für die Prüfung der mechanischen Festigkeit von Pellets fest. Es ist für Personen und Organisationen bestimmt, die im Zusammenhang mit diesen Pellets Maschinen, Ausrüstung, Werkzeuge und vollständige Anlagen herstellen, planen, verkaufen, montieren oder anwenden, und für alle Personen und Organisationen, die an der Herstellung, dem Einkauf, dem Verkauf und der Nutzung von Pellets beteiligt sind.
Die Festigkeit ist ein Maß für die Beständigkeit von gepressten Brennstoffen gegenüber Stoß und/oder Abrieb infolge von Handhabungs- und Transportprozessen.

Trdna biogoriva – Metode za določanje mehanske trdnosti pelet in briketov – 1. del: Peleti

General Information

• Status: Withdrawn
• Publication Date: 20-Dec-2005
• Withdrawal Date: 22-Dec-2009
• ICS: 75.160.10 - Solid fuels
• ICS: 75.160.40 - Biofuels
• Technical Committee: CEN/TC 335 - Solid biofuels
• Drafting Committee: CEN/TC 335/WG 4 - Physical and Mechanical Test Methods
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 23-Dec-2009
• Completion Date: 23-Dec-2009
• Mandate: M/298 - Mandate to CEN for standardisation in the field of solid biofuels
• Ref Project: SIST-TS CEN/TS 15210-1:2006 - Solid biofuels - Methods for the determination of mechanical durability of pellets and briquettes - Part 1: Pellets

Relations

• Replaced By: EN 15210-1:2009 - Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 1: Pellets
• Effective Date: 26-Dec-2009

Standards Content (Sample)

SLOVENSKI STANDARD
01-marec-2006
7UGQDELRJRULYD±0HWRGH]DGRORþDQMHPHKDQVNHWUGQRVWLSHOHWLQEULNHWRY±
GHO3HOHWL
Solid biofuels - Methods for the determination of mechanical durability of pellets and
briquettes - Part 1: Pellets
Feste Biobrennstoffe - Verfahren zur Bestimmung der mechanischen Festigkeit von
Pellets und Briketts - Teil 1: Pellets
Ta slovenski standard je istoveten z: CEN/TS 15210-1:2005
ICS:
75.160.10 Trda goriva Solid fuels
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

TECHNICAL SPECIFICATION
CEN/TS 15210-1
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
December 2005
ICS 75.160.10
English Version
Solid biofuels - Methods for the determination of mechanical
durability of pellets and briquettes - Part 1: Pellets
Feste Biobrennstoffe - Verfahren zur Bestimmung der
mechanischen Festigkeit von Pellets und Presslingen - Teil
1: Pellets
This Technical Specification (CEN/TS) was approved by CEN on 1 August 2005 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 15210-1:2005: E
worldwide for CEN national Members.

Contents page
Foreword .3
1 Scope .4
2 Normative references .4
3 Terms and definitions.4
4 Principle.4
5 Apparatus .4
6 Sample preparation.6
7 Procedure .6
8 Calculation of the mechanical durability: .6
9 Precision and bias .7
10 Test report .7
Annex A (informative) Example of pellet tester with two boxes .8
Bibliography.9

Foreword
This Technical Specification (CEN/TS 15210-1:2005) has been prepared by Technical Committee
CEN/TC 335 “Solid biofuels”, the secretariat of which is held by SIS.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to announce this CEN Technical Specification: Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland
and United Kingdom.
1 Scope
This working document aims to define the requirements and method used for testing the mechanical durability
of pellets. It is intended for persons and organisations that manufacture, plan, sell, erect or use machinery,
equipment, tools and entire plants related to such pellets, and to all persons and organisations involved in
producing, purchasing, selling and utilising pellets.
The durability is the measure of the resistance of densified fuels towards shocks and/or abrasion in
consequence of handling and transportation processes.

2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
CEN/TS 14588:2003, Solid biofuels – Terminology, definitions and descriptions
CEN/TS 14774-1, Solid biofuels - Methods for determination of moisture content - Oven dry method - Part 1:
Total moisture - Reference method
CEN/TS 14774-2, Solid biofuels - Methods for the determination of moisture content - Oven dry method - Part
2: Total moisture - Simplified method
CEN/TS 14778-1, Solid b
...