EN ISO 10239:2008
(Main)Small craft - Liquefied petroleum gas (LPG) systems (ISO 10239:2008)
Small craft - Liquefied petroleum gas (LPG) systems (ISO 10239:2008)
ISO 10239:2008 covers permanently installed liquefied petroleum gas (LPG) systems and LPG burning appliances on small craft of hull length up to 24 m, except for systems used on LPG-fuelled propulsion engines or LPG-driven generators.
ISO 10239:2008 does not cover appliances with directly attached gas cylinders, such as portable self-contained camping stoves and portable gas lamps.
Kleine Wasserfahrzeuge - Flüssiggas-Anlagen (LPG) (ISO 10239:2008)
Diese Internationale Norm behandelt fest eingebaute Flüssiggas (LPG )Anlagen und flüssiggasbetriebene Geräte auf kleinen Wasserfahrzeugen bis 24 m Rumpflänge, mit Ausnahme von Systemen, von flüssiggasbetriebenen Antriebsmaschinen oder von flüssiggasbetriebenen Generatoren.
Diese Internationale Norm gilt nicht für Geräte mit direkt angeschlossenen Gasflaschen, wie selbstversorgte tragbare Campingöfen und tragbare Gaslampen.
ANMERKUNG 1 Diese Internationale Norm ist nicht vorgesehen für die Festlegung technischer Anforderungen an Flüssiggas Flaschen, die nationalen Vorschriften unterliegen.
ANMERKUNG 2 Neuartige Konstruktionen, Werkstoffe und Bauweisen, die mindestens gleichwertige Ergebnisse erbringen, dürfen als den Anforderungen dieser Internationalen Norm entsprechend betrachtet werden, wenn sie von einer Zulassungsstelle anerkannt sind.
Petits navires - Installations alimentées en gaz de pétrole liquéfiés (GPL) (ISO 10239:2008)
L'ISO 10239:2008 couvre les installations à demeure alimentées en gaz de pétrole liquéfiés (GPL) et les appareils brûlant du GPL installés sur les bateaux d'une longueur de coque inférieure ou égale à 24 m, sauf les installations utilisées sur des moteurs de propulsion alimentés en GPL ou sur des générateurs fonctionnant au GPL.
L'ISO 10239:2008 ne traite pas des appareils fixés directement sur les bouteilles à gaz, comme les réchauds de camping portatifs et les lampes à gaz portatives.
Mala plovila - Sistemi za utekočinjeni naftni plin (LPG) (ISO 10239:2008)
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Small craft - Liquefied petroleum gas (LPG) systems (ISO 10239:2008)Petits navires - Installations alimentées en gaz de pétrole liquéfiés (GPL) (ISO 10239:2008)Kleine Wasserfahrzeuge - Flüssiggasanlagen (ISO 10239:2008)Ta slovenski standard je istoveten z:EN ISO 10239:2008SIST EN ISO 10239:2008en47.080ICS:SIST EN ISO 10239:2001/AC:2004SIST EN ISO 10239:20011DGRPHãþDSLOVENSKI
STANDARDSIST EN ISO 10239:200801-april-2008
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 10239February 2008ICS 47.080Supersedes EN ISO 10239:2000
English VersionSmall craft - Liquefied petroleum gas (LPG) systems (ISO10239:2008)Petits navires - Installations alimentées en gaz de pétroleliquéfiés (GPL) (ISO 10239:2008)Kleine Wasserfahrzeuge - Flüssiggasanlagen (ISO10239:2008)This European Standard was approved by CEN on 16 January 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 10239:2008: E
EN ISO 10239:2008 (E) 2 Contents Page Foreword.3 Annex ZA (informative)
Relationship between this International Standard and the Essential Requirements of EU Directive 94/25/EC, as amended by Directive 2003/44/EC.4
EN ISO 10239:2008 (E) 3 Foreword This document (EN ISO 10239:2008) has been prepared by Technical Committee ISO/TC 188 "Small craft" in collaboration with Technical Committee CEN/SS T01 "Shipbuilding and maritime structures", the secretariat of which is held by CMC. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2008, and conflicting national standards shall be withdrawn at the latest by August 2008. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 10239:2000. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EC Directive(s). For relationship with EC Directive, see informative Annex ZA, which is an integral part of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 10239:2008 has been approved by CEN as a EN ISO 10239:2008 without any modification.
EN ISO 10239:2008 (E) 4 Annex ZA (informative)
Relationship between this International Standard and the Essential Requirements of EU Directive 94/25/EC, as amended by Directive 2003/44/EC
This International Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association to provide one means of conforming to Essential Requirements of the New Approach Directive 94/25/EC as amended by Directive 2003/44/EC.
Once this standard is cited in the Official Journal of the European Communities under that Directive and has been implemented as a national standard in at least one Member State, compliance with the normative clauses of this standard given in Table ZA.1 confers, w
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.