Small craft - Windows, portlights, hatches, deadlights and doors - Strength and watertightness requirements (ISO/FDIS 12216:2019)

This document specifies technical requirements and test methods for windows, portlights, hatches, deadlights and doors on small craft with a length of hull, LH, as defined in ISO 8666:2016, of up to 24 m. It takes into account the type of craft, its design category, and the location of the appliance.
The appliances considered in this document are only those that are critical for the craft's watertightness.
Openings and non-opening devices fitted below area I (see 3.5.2) are excluded from the scope of this document.

Kleine Wasserfahrzeuge - Fenster, Bullaugen, Luken, Seeschlagblenden und Türen - Anforderungen an die Festigkeit und Wasserdichtheit (ISO/FDIS 12216:2019)

Dieses Dokument legt unter Berücksichtigung der Fahrzeugart, der Auslegungskategorie und des Einbau¬bereiches der Vorrichtungen technische Anforderungen und Prüfverfahren für Fenster, Bullaugen, Luken, Seeschlagblenden und Türen auf kleinen Wasserfahrzeugen mit Rumpflängen LH bis 24 m, wie in ISO 8666 festgelegt, fest.
Dieses Dokument gilt nur für die Vorrichtungen, die für die Wasserdichtheit des Fahrzeuges kritisch sind.
Öffnungen und nichtöffnende Einrichtungen, die unterhalb des Bereichs I angebracht sind (siehe 3.5.2), fallen nicht in den Anwendungsbereich dieses Dokuments.

Petits navires - Fenêtres, hublots, panneaux, tapes et portes - Exigences de résistance et d'étanchéité (ISO/FDIS 12216:2019)

Le présent document spécifie les exigences techniques et les méthodes d'essai pour les fenêtres, hublots, panneaux, tapes et portes sur les petits navires d'une longueur de coque LH, comme définie dans l'ISO 8666:2016, inférieure ou égale à 24 m. Il prend en compte le type de bateau, sa catégorie de conception et l'emplacement de l'équipement.
Les équipements pris en compte dans le présent document sont uniquement ceux qui sont critiques pour l'étanchéité du bateau.
Les dispositifs ouvrants et non-ouvrants installées en dessous de la zone I (voir le 3.5.2) sont exclus du domaine d'application du présent document.

Mala plovila - Okna, lopute, pokrovi in vrata - Zahteve za trdnost in odpornost proti vodi (ISO/FDIS 12216:2019)

General Information

Status
Not Published
Publication Date
17-May-2020
Current Stage
5098 - Decision to abandon - Formal Approval
Completion Date
10-Nov-2021

Relations

Buy Standard

Draft
prEN ISO 12216:2018
English language
49 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 12216:2018
01-november-2018
Mala plovila - Okna, lopute, pokrovi in vrata - Zahteve za trdnost in odpornost proti
vodi (ISO/DIS 12216:2018)
Small craft - Windows, portlights, hatches, deadlights and doors - Strength and
watertightness requirements (ISO/DIS 12216:2018)
Kleine Wasserfahrzeuge - Fenster, Bullaugen, Luken, Seeschlagblenden und Türen -
Anforderungen an die Festigkeit und Wasserdichtheit (ISO/DIS 12216:2018)
Petits navires - Fenêtres, hublots, panneaux, tapes et portes - Exigences de résistance
et d'étanchéité (ISO/DIS 12216:2018)
Ta slovenski standard je istoveten z: prEN ISO 12216
ICS:
47.080 ýROQL Small craft
oSIST prEN ISO 12216:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 12216:2018

---------------------- Page: 2 ----------------------
oSIST prEN ISO 12216:2018
DRAFT INTERNATIONAL STANDARD
ISO/DIS 12216
ISO/TC 188 Secretariat: SIS
Voting begins on: Voting terminates on:
2018-09-21 2018-12-14
Small craft — Windows, portlights, hatches, deadlights and
doors — Strength and watertightness requirements
Petits navires — Fenêtres, hublots, panneaux, tapes et portes — Exigences de résistance et d'étanchéité
ICS: 47.080
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 12216:2018(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2018

---------------------- Page: 3 ----------------------
oSIST prEN ISO 12216:2018
ISO 12216:####(X)
ISO/DIS 12216:2018(E)

Contents
Foreword . v
Introduction. vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions. 2
3.1 General definitions of openings and their coverings . 2
3.2 Devices covering an opening . 2
3.3 Plate of an appliance . 3
3.4 Specific appliances . 3
3.5 Areas definition . 4
3.6 Plate End-Connections . 6
3.7 Types of glass . 7
3.8 Watertightness . 7
3.9 Other general definitions . 8
4 General requirements . 9
4.1 Requirements of other International standards . 9
4.2 Strength of appliances .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.