Intelligent transport systems - Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format - Part 2: Syntax, semantics and framing structure (TPEG1-SSF) (ISO/TS 18234-2:2013)

ISO/TS 18234-2:2013 establishes the method of referencing used within a TPEG data-stream to allow a service provider to signal availability of the same service on another bearer channel or similar service data from another service.

Intelligente Transportsysteme - Reise- und Verkehrsinformation über binäres Datenformat der Transportprotokoll-Expertengruppe, 1. Generation (TPEG1) - Teil 2: Syntax, Semantik und Rahmenstruktur (TPEG1-SSF) (ISO/TS 18234-2:2013)

Systèmes intelligents de transport - Informations sur le trafic et le tourisme via les données de format binaire du groupe d'experts du protocole de transport, génération 1 (TPEG1) - Partie 2: Structure de syntaxe, de sémantique et de cadrage (TPEG1-SSF) (ISO/TS 18234-2:2013)

Inteligentni transportni sistemi - Prometne in potovalne informacije prek izvedenske skupine za transportne protokole, binarni podatkovni format 1. generacije (TPEG) - 2. del: Sintaksa, semantika in struktura okvirov (TPEG1-SSF) (ISO/TS 18234-2:2013)

General Information

Status
Published
Publication Date
15-Oct-2013
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Due Date
16-Oct-2013
Completion Date
16-Oct-2013

RELATIONS

Buy Standard

Technical specification
-TS CEN ISO/TS 18234-2:2014
English language
45 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST-TS CEN ISO/TS 18234-2:2014
01-marec-2014
Inteligentni transportni sistemi - Prometne in potovalne informacije prek
izvedenske skupine za transportne protokole, binarni podatkovni format 1.
generacije (TPEG) - 2. del: Sintaksa, semantika in struktura okvirov (TPEG1-SSF)
(ISO/TS 18234-2:2013)

Intelligent transport systems - Traffic and travel information via transport protocol experts

group, generation 1 (TPEG1) binary data format - Part 2: Syntax, semantics and framing

structure (TPEG1-SSF) (ISO/TS 18234-2:2013)

Intelligente Transportsysteme - Reise- und Verkehrsinformation über binäre Datenströme

der Transport Protokoll Expertengruppe, 1. Generation (TPEG1) - Teil 2: Syntax,
Semantik und Rahmenstruktur (TPEG1-SSF) (ISO/TS 18234-2:2013)

Systèmes intelligents de transport - Informations sur le trafic et le tourisme via les

données de format binaire du groupe d'experts du protocole de transport, génération 1

(TPEG1) - Partie 2: Structure de syntaxe, de sémantique et de cadrage (SSF) (ISO/TS

18234-2:2013)
Ta slovenski standard je istoveten z: CEN ISO/TS 18234-2:2013
ICS:
03.220.01 Transport na splošno Transport in general
35.240.60 Uporabniške rešitve IT v IT applications in transport
transportu in trgovini and trade
SIST-TS CEN ISO/TS 18234-2:2014 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST-TS CEN ISO/TS 18234-2:2014
---------------------- Page: 2 ----------------------
SIST-TS CEN ISO/TS 18234-2:2014
TECHNICAL SPECIFICATION
CEN ISO/TS 18234-2
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
October 2013
ICS 35.240.60; 03.220.01 Supersedes CEN ISO/TS 18234-2:2006
English Version
Intelligent transport systems - Traffic and travel information via
transport protocol experts group, generation 1 (TPEG1) binary
data format - Part 2: Syntax, semantics and framing structure
(TPEG1-SSF) (ISO/TS 18234-2:2013)

Systèmes intelligents de transport - Informations sur le Intelligente Transportsysteme - Reise- und

trafic et le tourisme via les données de format binaire du Verkehrsinformation über binäre Datenströme der

groupe d'experts du protocole de transport, génération 1 Transport Protokoll Expertengruppe, 1. Generation

(TPEG1) - Partie 2: Structure de syntaxe, de sémantique et (TPEG1) - Teil 2: Syntax, Semantik und Rahmenstruktur

de cadrage (TPEG1-SSF) (ISO/TS 18234-2:2013) (TPEG1-SSF) (ISO/TS 18234-2:2013)

This Technical Specification (CEN/TS) was approved by CEN on 15 July 2013 for provisional application.

The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their

comments, particularly on the question whether the CEN/TS can be converted into a European Standard.

CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available

promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)

until the final decision about the possible conversion of the CEN/TS into an EN is reached.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United

Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels

© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TS 18234-2:2013: E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST-TS CEN ISO/TS 18234-2:2014
CEN ISO/TS 18234-2:2013 (E)
Contents Page

Foreword ..............................................................................................................................................................3

---------------------- Page: 4 ----------------------
SIST-TS CEN ISO/TS 18234-2:2014
CEN ISO/TS 18234-2:2013 (E)
Foreword

This document (CEN ISO/TS 18234-2:2013) has been prepared by Technical Committee ISO/TC 204

"Intelligent transport systems" in collaboration with Technical Committee CEN/TC 278 “Intelligent transport

systems” the secretariat of which is held by NEN.

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent

rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.

This document supersedes CEN ISO/TS 18234-2:2006.

According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following

countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria, Croatia, Cyprus,

Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,

Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,

Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

Endorsement notice

The text of ISO/TS 18234-2:2013 has been approved by CEN as CEN ISO/TS 18234-2:2013 without any

modification.
---------------------- Page: 5 ----------------------
SIST-TS CEN ISO/TS 18234-2:2014
---------------------- Page: 6 ----------------------
SIST-TS CEN ISO/TS 18234-2:2014
TECHNICAL ISO/TS
SPECIFICATION 18234-2
Second edition
2013-10-15
Corrected version
2013-11-01
Intelligent transport systems — Traffic
and travel information via transport
protocol experts group, generation 1
(TPEG1) binary data format —
Part 2:
Syntax, semantics and framing structure
(TPEG1-SSF)
Systèmes intelligents de transport — Informations sur le trafic et le
tourisme via les données de format binaire du groupe d'experts du
protocole de transport, génération 1 (TPEG1)
Partie 2: Structure de syntaxe, de sémantique et de cadrage
(TPEG1-SSF)
Reference number
ISO/TS 18234-2:2013(E)
ISO 2013
---------------------- Page: 7 ----------------------
SIST-TS CEN ISO/TS 18234-2:2014
ISO/TS 18234-2:2013(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2013

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any

means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission.

Permission can be requested from either ISO at the address below or ISO’s member body in the country of the requester.

ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved
---------------------- Page: 8 ----------------------
SIST-TS CEN ISO/TS 18234-2:2014
ISO/TS 18234-2:2013(E)
Contents Page

Foreword ............................................................................................................................................................. v

Introduction ......................................................................................................................................................... v

1  Scope ...................................................................................................................................................... 1

2  Normative references ............................................................................................................................ 1

3  Abbreviated terms ................................................................................................................................. 2

4  Design principles ................................................................................................................................... 3

4.1  TPEG transmission ............................................................................................................................... 3

4.2  TPEG layer model .................................................................................................................................. 4

5  Conventions and symbols .................................................................................................................... 6

5.1  Conventions ........................................................................................................................................... 6

5.1.1  Byte ordering ......................................................................................................................................... 6

5.1.2  Method of describing the byte-oriented protocol .............................................................................. 6

5.1.3  Reserved data fields .............................................................................................................................. 6

5.2  Symbols .................................................................................................................................................. 6

5.2.1  Literal numbers ...................................................................................................................................... 6

5.2.2  Variable numbers .................................................................................................................................. 6

5.2.3  Implicit numbers .................................................................................................................................... 7

6  Representation of syntax ..................................................................................................................... 7

6.1  General ................................................................................................................................................... 7

6.2  Data type notation ................................................................................................................................. 7

6.2.1  Rules for data type definition representation ..................................................................................... 7

6.2.2  Description of data type definition syntax .......................................................................................... 9

6.3  Application dependent data types ..................................................................................................... 10

6.3.1  Data structures .................................................................................................................................... 11

6.3.2  Using templates as interfaces ............................................................................................................ 12

6.3.3  Components ......................................................................................................................................... 13

6.4  Toolkits and external definition ......................................................................................................... 15

6.5  Application design principles ............................................................................................................ 15

6.5.1  Variable data structures ..................................................................................................................... 15

6.5.2  Re-usable and extendable structures ............................................................................................... 15

6.5.3  Validity of declarative structures ....................................................................................................... 15

7  TPEG data stream description ........................................................................................................... 16

7.1  Diagrammatic hierarchy representation of frame structure ........................................................... 16

7.2  Syntactical Representation of the TPEG Stream ............................................................................. 16

7.2.1  TPEG transport frame structure ........................................................................................................ 16

7.2.2  TPEG service frame template structure ............................................................................................ 17

7.2.3  Service frame of frame type = 0 ......................................................................................................... 17

7.2.4  Service frame of frame type = 1 ......................................................................................................... 17

7.2.5  TPEG service component frame multiplex ....................................................................................... 18

7.2.6  Interface to application specific frames ............................................................................................ 18

7.3  Description of data on Transport level .............................................................................................. 21

7.3.1  Syncword ............................................................................................................................................. 21

7.3.2  Field length .......................................................................................................................................... 21

7.3.3  Header CRC .......................................................................................................................................... 21

7.3.4  Frame type ........................................................................................................................................... 21

7.3.5  Synchronization method..................................................................................................................... 22

7.3.6  Error detection ..................................................................................................................................... 22

7.4  Description of data on Service level .................................................................................................. 22

© ISO 2013 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST-TS CEN ISO/TS 18234-2:2014
ISO/TS 18234-2:2013(E)

7.4.1  Encryption indicator ............................................................................................................................22

7.4.2  Service identification ...........................................................................................................................22

7.5  Description of data on Service component level .............................................................................23

7.5.1  Service component identifier .............................................................................................................23

7.5.2  Field length ...........................................................................................................................................23

7.5.3  Service component frame header CRC .............................................................................................23

7.5.4  Service component frame data CRC..................................................................................................23

Annex A (normative) Character tables ............................................................................................................24

A.1  Character tables ...................................................................................................................................24

A.2  Reference character table index ........................................................................................................24

Annex B (normative) Method for coding quantities of objects ....................................................................25

B.1  Numag derivation .................................................................................................................................25

B.2  Numag table .........................................................................................................................................26

Annex C (normative) CRC calculation ............................................................................................................27

C.1  CRC calculation ...................................................................................................................................27

C.2  ITU-T (formerly CCITT) CRC calculation in PASCAL .......................................................................27

C.3  ITU-T (formerly CCITT) CRC calculation in C notation ....................................................................28

Annex D (normative) Time calculation ............................................................................................................29

D.1  Time calculation ...................................................................................................................................29

D.2  Time calculation in C notation ............................................................................................................29

Annex E (informative) A description of the TPEG byte-stream using C-type notation ..............................32

E.1  Explanation ...........................................................................................................................................32

E.2  Definition of data elements .................................................................................................................32

E.3  Definition of conditional expressions................................................................................................33

E.4  Byte-stream representation of the TPEG hierarchy .........................................................................33

E.4.1  Definition of nextbyte function ...........................................................................................................33

E.4.2  Definition of next_start_code function ..............................................................................................33

E.4.3  Definition of tpeg_stream function ....................................................................................................34

iv © ISO 2013 – All rights reserved
---------------------- Page: 10 ----------------------
SIST-TS CEN ISO/TS 18234-2:2014
ISO/TS 18234-2:2013(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies

(ISO member bodies). The work of preparing International Standards is normally carried out through ISO

technical committees. Each member body interested in a subject for which a technical committee has been

established has the right to be represented on that committee. International organizations, governmental and

non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the

International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.

International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.

The main task of technical committees is to prepare International Standards. Draft International Standards

adopted by the technical committees are circulated to the member bodies for voting. Publication as an

International Standard requires approval by at least 75 % of the member bodies casting a vote.

In other circumstances, particularly when there is an urgent market requirement for such documents, a

technical committee may decide to publish other types of normative document:

— an ISO Publicly Available Specification (ISO/PAS) represents an agreement between technical experts in

an ISO working group and is accepted for publication if it is approved by more than 50 % of the members

of the parent committee casting a vote;

— an ISO Technical Specification (ISO/TS) represents an agreement between the members of a technical

committee and is accepted for publication if it is approved by 2/3 of the members of the committee casting

a vote.

An ISO/PAS or ISO/TS is reviewed after three years in order to decide whether it will be confirmed for a

further three years, revised to become an International Standard, or withdrawn. If the ISO/PAS or ISO/TS is

confirmed, it is reviewed again after a further three years, at which time it must either be transformed into an

International Standard or be withdrawn.

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent

rights. ISO shall not be held responsible for identifying any or all such patent rights.

ISO/TS 18234-2 was prepared by the European Committee for Standardization (CEN) Technical Committee

CEN/TC 278, Road transport and traffic telematics, in collaboration with ISO Technical Committee

ISO/TC 204, Intelligent transport systems, in accordance with the Agreement on technical cooperation

between ISO and CEN (Vienna Agreement).

This second edition cancels and replaces the first edition (ISO/TS 18234-2:2006). Clauses 5, 6 and 7 have

been technically revised.

ISO/TS 18234 consists of the following parts, under the general title Intelligent transport systems — Traffic

and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format:

 Part 1: Introduction, numbering and versions (TPEG1-INV)
 Part 2: Syntax, semantics and framing structure (TPEG1-SSF)
 Part 3: Service and network information(TPEG1-SNI)
 Part 4: Road Traffic Message application (TPEG1-RTM)
 Part 5: Public Transport Information (PTI) application
© ISO 2013 – All rights reserved v
---------------------- Page: 11 ----------------------
SIST-TS CEN ISO/TS 18234-2:2014
ISO/TS 18234-2:2013(E)
 Part 6: Location referencing applications
 Part 7: Parking information (TPEG1-PK1)
 Part 8: Congestion and travel-time application (TPEG1-CTT)
 Part 9: Traffic event compact (TPEG1-TEC)
 Part 10: Conditional access information (TPEG1-CAI)
 Part 11: Location Referencing Container (TPEG1-LRC)

This corrected version of ISO 18234-2:2013 incorporates the following corrections:

 The quality of Figures 4 and 5 has been improved for legibility.
vi © ISO 2013 – All rights reserved
---------------------- Page: 12 ----------------------
SIST-TS CEN ISO/TS 18234-2:2014
ISO/TS 18234-2:2013(E)
Introduction

TPEG technology uses a byte-oriented data stream format, which may be carried on almost any digital bearer

with an appropriate adaptation layer. TPEG messages are delivered from service providers to end-users, and

are used to transfer application data from the database of a service provider to a user’s equipment.

This Technical Specification describes the Service and Network Information Application, which provides a

means of informing end-users about all possible services and their content which are considered relevant by a

service provider to either provide continuity of his services or inform the end-user about other related services.

As stated in the design criteria, TPEG is a bearer independent system. Therefore some rules are established

for the relation of information contents of the same service on different bearers. Also the mechanisms for

following a certain service on one single bearer have to be defined. For the receiver it is essential to find an

adjacent or similar service if it leaves the current reception area. Nonetheless, basic information describing the

service itself is necessary. For the ease of the user, e.g. the service name, the service provider name, the

operating time and many other hints are delivered by the TPEG-SNI application.

General models for the hand-over and the referencing of services are developed and shown in detail. It is

important to note that this Technical Specification is closely related to ISO/TS 18234-3 and thus they are

dependent upon each other and must be used together.

The brief history of TPEG technology development dates back to the European Broadcasting Union (EBU)

Broadcast Management Committee establishing the B/TPEG project group in autumn 1997 with the mandate

to develop, as soon as possible, a new protocol for broadcasting traffic and travel-related information in the

multimedia environment. TPEG technology, its applications and service features are designed to enable

travel-related messages to be coded, decoded, filtered and understood by humans (visually and/or audibly in

the user’s language) and by agent systems.

One year later in December 1998, the B/TPEG group produced its first EBU specifications. Two Technical

Specifications were released. ISO/TS 18234-2, this document, described the Syntax, Semantics and Framing

Structure, which is used for all TPEG applications. ISO/TS 18234-4 (TPEG-RTM) described the first

application, for Road Traffic Messages.

Subsequently, CEN/TC 278/WG 4, in conjunction with ISO/TC 204, established a project group comprising the

members of B/TPEG and they have continued the work concurrently since March 1999. Since then two further

parts were developed to make the initial complete set of four parts, enabling the implementation of a

consistent service. ISO/TS 18234-3 (TPEG-SNI) describes the Service and Network Information Application,

which should be used by all service implementations to ensure appropriate referencing from one service

source to another. ISO/TS 18234-1 (TPEG-INV), completes the series, by describing the other parts and their

relationship; it also contains the application IDs used within the other parts.

In April 2000, the B/TPEG group released revised Parts 1 to 4, all four parts having been reviewed and

updated in the light of initial implementation results. Thus a consistent suite of specifications, ready for wide

scale implementation, was submitted to the CEN/ISO commenting process.

In November 2001, after extensive response to the comments received and from many internally suggested

improvements, all four parts were completed for the next stage: the Parallel Formal Vote in CEN and ISO. But

a major step forward has been to develop the so-called TPEG-Loc location referencing method, which

enables both map-based TPEG-decoders and non map-based ones to deliver either map-based location

referencing or human readable information. ISO/TS 18234-6 is now a separate specification and is used in

association with the other parts of ISO/TS 18234 to provide comprehensive location referencing. Additionally,

ISO/TS 18234-5, has been developed and been through the commenting process.

This Technical Specification provides a full specification to the primitives used, framing, time calculation,

numbers and to specific rules such as CRC calculation.
© ISO 2013 – All rights reserved vii
---------------------- Page: 13 ----------------------
SIST-TS CEN ISO/TS 18234-2:2014
ISO/TS 18234-2:2013(E)

During the development of the TPEG technology a number of versions have been documented and various

trials implemented using various versions of the specifications. At the time of the publication of this Technical

Specification, all parts are fully inter-workable and no specific dependencies exist.

This Technical Specification has the technical version number TPEG-SSF_3.0/003.
viii © ISO 2013 – All rights reserved
---------------------- Page: 14 ----------------------
SIST-TS CEN ISO/TS 18234-2:2014
TECHNICAL SPECIFICATION ISO/TS 18234-2:2013(E)
Intelligent transport systems — Traffic and travel information
via transport protocol experts group, generation 1 (TPEG1)
binary data format —
Part 2:
Syntax, semantics and framing structure (TPEG1-SSF)
1 Scope

This Technical Specification establishes the method of referencing used within a TPEG data-stream to allow a

service provider to signal availability of the same service on another bearer channel or similar service data

from another service.

TPEG is a byte-oriented stream format, which may be carried on almost any digital bearer with an appropriate

adaptation layer. TPEG messages are delivered from service providers to end-users, and are used to transfer

application data from the database of a service provider to a user’s equipment.

The protocol is structured in a layered manner and employs a general purpose framing system which is

adaptable and extensible, and which carries frames of variable length. This has been designed with the

capability of explicit frame length identification at nearly all levels, giving greater flexibility and integrity, and

permitting the modification of the protocol and the addition of new features without disturbing the operation of

earlier client decoder models.
2 Normative references

The following referenced documents are indispensable for the application of this document. For dated

references, only the edition cited applies. For undated references, the latest edition of the referenced

document (including any amendments) applies.

ISO/IEC 7498-1, Information technology — Open Systems Interconnection — Basic Reference Model: The

Basic Model

ISO/IEC 8859-1, Information technology — 8-bit single-byte coded graphic character sets — Part 1: Latin

alphabet No. 1
ISO/IEC 8859-2, Information technology — 8-bit single-byte
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.