EN 755-2:2013

Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties

This European Standard specifies the mechanical property limits resulting from tensile testing applicable to aluminium and aluminium alloy extruded rod/bar, tube and profile.
Technical conditions for inspection and delivery, including product and testing requirements, are specified in EN 755-1. Temper designations are defined in EN 515. The chemical composition limits for these materials are given in EN 573-3.

Aluminium und Aluminiumlegierungen - Stranggepresste Stangen, Rohre und Profile - Teil 2: Mechanische Eigenschaften

Diese Europäische Norm legt die Grenzwerte für die mechanischen Eigenschaften von stranggepressten Stangen, Rohren und Profilen aus Aluminium und Aluminiumlegierungen fest.
Die technischen Lieferbedingungen, einschließlich Erzeugnis- und Prüfanforderungen, sind in EN 755 1 fest-gelegt. Die Bezeichnungen der Werkstoffzustände sind in EN 515 definiert. In der EN 573-3 sind die Grenzen der chemischen Zusammensetzung für diese Werkstoffe angegeben.

Aluminium et alliages d'aluminium - Barres, tubes et profilés filés - Partie 2: Caractéristiques mécaniques

La présente Norme européenne spécifie les limites des caractéristiques mécaniques provenant de l’essai de traction applicables aux barres, tubes et profilés filés en aluminium et alliages d’aluminium.
Les conditions techniques de contrôle et de livraison, y compris les produits et les exigences d’essai, sont spécifiées dans l’EN 755-1. La désignation des états métallurgiques sont définis dans l’EN 515. Les limites de composition chimique de ces matériaux sont données dans l’EN 573-3.

Aluminij in aluminijeve zlitine - Iztiskane palice/drogovi, cevi in profili - 2. del: Mehanske lastnosti

General Information

• Status: Withdrawn
• Publication Date: 01-Oct-2013
• Withdrawal Date: 15-Mar-2016
• ICS: 77.150.10 - Aluminium products
• Technical Committee: CEN/TC 132 - Aluminium and aluminium alloys
• Drafting Committee: CEN/TC 132 - Aluminium and aluminium alloys
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 16-Mar-2016
• Ref Project: SIST EN 755-2:2014 - Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties

Relations

• Replaces: EN 755-2:2008 - Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties
• Effective Date: 16-Jul-2011
• Replaced By: EN 755-2:2016 - Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties
• Effective Date: 23-Mar-2016

Standards Content (Sample)

SLOVENSKI STANDARD
01-februar-2014
1DGRPHãþD
SIST EN 755-2:2008
Aluminij in aluminijeve zlitine - Iztiskane palice/drogovi, cevi in profili - 2. del:
Mehanske lastnosti
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2:
Mechanical properties
Aluminium und Aluminiumlegierungen - Stranggepresste Stangen, Rohre und Profile -
Teil 2: Mechanische Eigenschaften
Aluminium et alliages d'aluminium - Barres, tubes et profilés filés - Partie 2:
Caractéristiques mécaniques
Ta slovenski standard je istoveten z: EN 755-2:2013
ICS:
77.150.10 Aluminijski izdelki Aluminium products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 755-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2013
ICS 77.150.10 Supersedes EN 755-2:2008
English Version
Aluminium and aluminium alloys - Extruded rod/bar, tube and
profiles - Part 2: Mechanical properties
Aluminium et alliages d'aluminium - Barres, tubes et Aluminium und Aluminiumlegierungen - Stranggepresste
profilés filés - Partie 2: Caractéristiques mécaniques Stangen, Rohre und Profile - Teil 2: Mechanische
Eigenschaften
This European Standard was approved by CEN on 22 August 2013.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 755-2:2013: E
worldwide for CEN national Members.

Contents Page
Foreword .3
1 Scope .4
2 Normative references .4
3 Mechanical property limits .4
3.1 General .4
3.2 Elongation .4
3.3 Reference list of the tables of mechanical properties of the relevant aluminium and
aluminium alloys .5
3.4 Tables of mechanical properties .7
Annex A (informative) List of tempers used in Tables 1 to 59 (extract of EN 515) . 65
Bibliography . 66

Foreword
This document (EN 755-2:2013) has been prepared by Technical Committee CEN/TC 132 “Aluminium and
aluminium alloys”, the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by April 2014, and conflicting national standards shall be withdrawn at the
latest by April 2014.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
CEN/TC 132 affirms its policy that if a patentee refuses to grant licences on standardized products under
reasonable and not discriminatory conditions, this product will be removed from the corresponding document.
This document supersedes EN 755-2:2008.
CEN/TC 132 decided to revise EN 755-2:2008 as follows:
 addition of the alloys EN AW-6026 and EN AW-6064A in new Tables 25 and 26;
 EN 10002-1 was replaced by EN ISO 6892-1;
 editorial corrections in Tables 7, 22, 47, 49, 54 and 59.
EN 755 comprises the following parts under the general title "Aluminium and aluminium alloys — Extruded
rod/bar, tube and profiles":
 Part 1: Technical conditions for inspection and delivery
 Part 2: Mechanical properties
 Part 3: Round bars, tolerances on dimensions and form
 Part 4: Square bars, tolerances on dimensions and form
 Part 5: Rectangular bars, tolerances on dimensions and form
 Part 6: Hexagonal bars, tolerances on dimensions and form
 Part 7: Seamless tubes, tolerances on dimensions and form
 Part 8: Porthole tubes, tolerances on dimensions and form
 Part 9: Profiles, tolerances on dimensions and form
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
1 Scope
This European Standard specifies the mechanical property limits resulting from tensile testing applicable to
aluminium and aluminium alloy extruded rod/bar, tube and profile.
Technical conditions for inspection and delivery, including product and testing requirements, are specified in
EN 755-1. Temper designations are defined in EN 515. The chemical composition limits for these materials
are given in EN 573-3.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
EN 755-1, Aluminium and aluminium alloys — Extruded rod/bar, tube and profiles — Part 1: Technical
conditions for inspection and delivery
EN ISO 6892-1, Metallic materials — Tensile testing — Part 1: Method of test at room temperature
(ISO 6892-1)
3 Mechanical property limits
3.1 General
The mechanical properties shall be in conformity with those specified in Table 1 to Table 59 or those agreed
upon between supplier and purchaser and stated in the order document.
Table 1 to Table 59 contain limits of mechanical property values obtained by tensile testing according to
EN ISO 6892-1 after sampling and test piece preparation according to EN 755-1.
NOTE The mechanical properties refer to test pieces taken in the longitudinal direction. Mechanical properties of test
pieces taken in other directions can differ from those for the longitudinal direction quoted in this standard.
Brinell hardness values given in Table 1 to Table 59 expressed as HBW values are for information only.
3.2 Elongation
If not otherwise agreed, the A value shall be used.
The A value for elongation is the % elongation measured over a gauge length of 5,65 S (where S is the
o
o
initial cross-sectional area of the test-piece), and expressed in percent.
For certain products the supplier may choose (if not otherwise specified in the order documents) to use the
elongation based on A Consequently, values for the A are included in the following tables.
50mm. 50mm
The A value is the elongation measured over a gauge length of 50 mm and expressed in percent.
50mm
Test pieces and their location in the specimen are given in EN 755-1.
3.3 Reference list of the tables of mechanical properties of the relevant aluminium and
aluminium alloys
Page
Table 1 Aluminium EN AW-1050A [Al 99,5] 7
Table 2 Aluminium EN AW-1070A [Al 99,7] 8
Table 3 Aluminium EN AW-1200 [Al 99,0] 9
Table 4 Aluminium EN AW-1350 [Al 99,5] 10
Table 5 Alloy EN AW-2007 [Al Cu4PbMgMn] 11
Table 6 Alloy EN AW-2011 and EN AW-2011A [Al Cu6BiPb] and [Al Cu6BiPb(A)] 12
Table 7 Alloy EN AW-2014 and EN AW-2014A [Al Cu4SiMg] and [Al Cu4SiMg(A)] 13
Table 8 Alloy EN AW-2017A [Al Cu4MgSi(A)] 14
Table 9 Alloy EN AW-2024 [Al Cu4Mg1] 15
Table 10 Alloy EN AW-2030 [Al Cu4PbMg] 16
Table 11 Alloy EN AW-3102 [Al Mn0,2] 17
Table 12 Alloy EN AW-3003 [Al Mn1Cu] 18
Table 13 Alloy EN AW-3103 [Al Mn1] 19
Table 14 Alloy EN AW-5005 and EN AW-5005A [Al Mg1(B)] and [Al Mg 1(C)] 20
Table 15 Alloy EN AW-5019 [Al Mg5] 21
Table 16 Alloy EN AW-5049 [Al Mg2Mn0,8] 22
Table 17 Alloy EN AW-5051A [Al Mg2] 23
Table 18 Alloy EN AW-5251 [Al Mg2Mn0,3] 24
Table 19 Alloy EN AW-5052 [Al Mg2,5] 25
Table 20 Alloy EN AW-5154A [Al Mg3,5(A)] 26
Table 21 Alloy EN AW-5454 [Al Mg3Mn] 27
Table 22 Alloy EN AW-5754 [Al Mg3] 28
Table 23 Alloy EN AW-5083 [Al Mg4,5Mn0,7] 29
Table 24 Alloy EN AW-5086 [Al Mg4] 30
Table 25 Alloy EN AW-6026 [AI MgSiBi] 30
Table 26 Alloy EN AW-6064A [AI Mg1SiBi] 31
Table 27 Alloy EN AW-6101A [AI MgSi(A)] 32
Table 28 Alloy EN AW-6101B [AI MgSi(B)] 33
Table 29 Alloy EN AW-6005 and EN AW-6005A [Al SiMg] and [Al SiMg(A)] 34
Table 30 Alloy EN AW-6106 [Al MgSiMn] 35
Table 31 Alloy EN AW-6008 [Al SiMgV] 36
Table 32 Alloy EN AW-6110A [Al Mg0,9Si0,9MnCu(A)] 37
Table 33 Alloy EN AW-6012 [Al MgSiPb] 38
Table 34 Alloy EN AW-6014 [Al Mg0,6SiV] 39
Table 35 Alloy EN AW-6018 [Al Mg1SiPbMn] 40
Table 36 Alloy EN AW-6023 [Al Si1Sn1MgBi] 41
Table 37 Alloy EN AW-6351 [Al Si1Mg0,5Mn] 42
Table 38 Alloy EN AW-6060 [Al MgSi] 43
Table 39 Alloy EN AW-6360 [Al SiMgMn] 44
Table 40 Alloy EN AW-6061 [AI Mg1SiCu] 45
Table 41 Alloy EN AW-6261 [Al Mg1SiCuMn] 46
Table 42 Alloy EN AW-6262 [Al Mg1SiPb] 47
Table 43 Alloy EN AW-6262A [Al Mg1SiSn] 48
Table 44 Alloy EN AW-6063 [Al Mg0,7Si] 49
Table 45 Alloy EN AW-6063A [AI Mg0,7Si(A)] 50
Table 46 Alloy EN AW-6463 [Al Mg0,7Si(B)] 51
Table 47 Alloy EN AW-6065 [Al Mg1Bi1Si] 52
Table 48 Alloy EN AW-6081 [Al Si0,9MgMn] 53
Table 49 Alloy EN AW-6082 [Al Si1MgMn] 54
Table 50 Alloy EN AW-6182 [Al Si1MgZr] 55
Table 51 Alloy EN AW-7003 [Al Zn6Mg0,8Zr] 56
Table 52 Alloy EN AW-7005 [Al Zn4,5Mg1,5Mn] 57
Table 53 Alloy EN-AW-7108 [Al Zn5Mg1Zr] 58
Table 54 Alloy EN-AW-7108A [Al Zn5Mg1Zr(A)] 59
Table 55 Alloy EN AW-7020 [AI Zn4,5Mg1] 60
Table 56 Alloy EN AW-7021 [Al Zn5,5Mg1,5] 61
Table 57 Alloy EN AW-7022 [Al Zn5Mg3Cu] 62
Table 58 Alloy EN AW-7049A [Al Zn8MgCu] 63
Table 59 Alloy EN AW-7075 [Al Zn5,5MgCu] 64

3.4 Tables of mechanical properties
Table 1 — Aluminium EN AW-1050A [Al 99,5]
Extruded rod/bar
Hardness
R R
Dimensions
m p0,2
A A
50 mm
mm Typical
MPa MPa
Temper
% %
value
a b
min. min.
D S min. max. min. max.
HBW
c
F , H112 all all 60 - 20 - 25 23 20
O, H111 all all 60 95 20 - 25 23 20
Extruded tube
R R
Hardness
m p0,2
A A
Wall thickness 50 mm
MPa MPa
Typical
t
Temper % %
value
mm
min. min
min. max. min. max.
HBW
c
F , H112 all 60 20 - 25 23 20
O, H111 all 60 95 20 - 25 23 20
Extruded profile
R Hardness
R
m p0,2
A A
Wall thickness 50 mm
Typical
MPa MPa
Temper t % %
value
mm
min. min
min. max. min. max.
HBW
c
F , H112 all 60 20 - 25 23 20
a
D = Diameter for round bar.
b
S = Width across flats for square and hexagonal bar, thickness for rectangular bar.
c
F Temper: property values are for information only.

Table 2 — Aluminium EN AW-1070A [Al 99,7]
Extruded rod/bar
R R Hardness
Dimensions
m p0,2
A A
50 mm
mm Typical
MPa MPa
Temper % %
value
a b
min. min.
D S min. max. min. max.
HBW
c
F , H112 all all 60 - 23 25 23 18
Extruded tube
Not specified
Extruded profile
Not specified
a
D = Diameter for round bar.
b
S = Width across flats for square and hexagonal bar, thickness for rectangular bar.
c
F Temper: property values are for information only.

Table 3 — Aluminium EN AW-1200 [Al 99,0]
Extruded rod/bar
R R Hardness
Dimensions m p0,2
A A
50 mm
mm
MPa MPa Typical
Temper % %
value
a b
min. min.
D S min. max. min. max.
HBW
c
F , H112 all all 75 - 25 - 20 18 23
Extruded tube
R R Hardness
m p0,2
A A
50 mm
Wall thickness
Typical
MPa MPa
Temper t % %
value
mm
min. min.
min. max. min. max.
HBW
c
F , H112 all all 75 - 25 20 18 23
Extruded profile
R R Hardness
m p0,2
A A
Wall thickness 50 mm
Typical
MPa MPa
Temper t % %
value
mm
min. min.
min. max. min. max.
HBW
c
F , H112 all 75 - 25 20 18 23
a
D = Diameter for round bar.
b
S = Width across flats for square and hexagonal bar, thickness for rectangular bar.
c
F Temper: property values are for information only.
...