EN 851:2022

Aluminium and aluminium alloys - Circle and circle stock for the production of culinary utensils - Specifications

This document specifies the particular requirements for wrought aluminium and aluminium alloys in the form of circle or circle stock for culinary utensils applications.
This document is applicable to:
—   circles made out of hot or cold rolled circles stock, with a thickness from 0,2 mm up to and including 12 mm and with a diameter from 100 mm up to and including 1 600 mm;
NOTE   Circles with a diameter up to 1 000 mm can be produced by blanking.
—   hot or cold-rolled circle stock with a thickness from 0,2 mm up to and including 12 mm and with a width up to 1 600 mm.
This document is not applicable to slugs for impact extrusions which are dealt with in other European Standards.

Aluminium und Aluminiumlegierungen - Ronden und Rondenvormaterial zur Herstellung von Küchengeschirr - Spezifikationen

Dieses Dokument legt die besonderen Anforderungen für Ronden und Rondenvormaterial aus Aluminium-Knetlegierung und Aluminiumlegierungen fest, die zur Herstellung von Küchengeschirr eingesetzt werden.
Dieses Dokument ist anzuwenden für:
—   Ronden, die aus kalt- bzw. warmgewalztem Rondenvormaterial mit einer Dicke von 0,2 mm bis 12 mm und einem Durchmesser von 100 mm bis 1 600 mm hergestellt werden;
ANMERKUNG   Ronden mit einem Durchmesser von bis zu 1 000 mm können durch Stanzen hergestellt werden.
—   kalt- bzw. warmgewalztes Rondenvormaterial mit einer Dicke von 0,2 mm bis 12 mm und einer Breite bis 1 600 mm.
Dieses Dokument ist nicht anzuwenden für Butzen zum Fließpressen, die in anderen Europäischen Normen behandelt werden.

Aluminium et alliages d'aluminium - Disques et ébauches pour disques pour applications culinaires - Spécifications

Le présent document spécifie les exigences particulières applicables à l'aluminium et aux alliages d'aluminium corroyés sous forme de disques ou d'ébauches pour disques destinés à la fabrication d’ustensiles culinaires.
Il s'applique aux :
- disques fabriqués à partir d'ébauches pour disques laminées à chaud ou à froid, d'épaisseur comprise entre 0,2 mm et 12 mm inclus, et de diamètre compris entre 100 mm et 1 600 mm inclus ;
NOTE   Les disques dont le diamètre n'excède pas 1 000 mm peuvent être fabriqués par poinçonnage.
- ébauches pour disques laminées à chaud ou à froid, d'épaisseur comprise entre 0,2 mm et 12 mm inclus et de largeur inférieure ou égale à 1 600 mm.
Le présent document ne s'applique pas aux pions de filage par choc qui sont traités dans d'autres Normes européennes.

Aluminij in aluminijeve zlitine - Rondele in polizdelki za izdelavo jedilnih pripomočkov in posode - Specifikacije

Ta dokument določa posamezne zahteve za gneteni aluminij in aluminijeve zlitine v obliki rondel ali polizdelkov za uporabo pri izdelavi jedilnih pripomočkov in posode.
Ta standard se uporablja za:
–   rondele, izdelane iz vroče ali hladno valjanih polizdelkov z debelino od 0,2 mm do vključno 12 mm in s premerom od 100 mm do vključno 1600 mm.
OPOMBA:   Rondele s premerom do 1000 mm je mogoče izdelati s finim rezanjem.
–   vroče ali hladno valjane polizdelke z debelino od 0,2 mm do vključno 12 mm in s premerom do 1600 mm.
Ta dokument se ne uporablja za kovinske palice za udarno iztiskanje, ki so obravnavane v drugih evropskih standardih.

General Information

• Status: Published
• Publication Date: 22-Mar-2022
• Withdrawal Date: 29-Sep-2022
• ICS: 77.150.10 - Aluminium products
• Technical Committee: CEN/TC 132 - Aluminium and aluminium alloys
• Drafting Committee: CEN/TC 132/WG 7 - Sheets, strips and plates
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 23-Mar-2022
• Due Date: 02-Nov-2022
• Completion Date: 23-Mar-2022
• Ref Project: SIST EN 851:2022 - Aluminium and aluminium alloys - Circle and circle stock for the production of culinary utensils - Specifications

Relations

• Replaces: EN 851:2014 - Aluminium and aluminium alloys - Circle and circle stock for the production of culinary utensils - Specifications
• Effective Date: 30-Mar-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 851:2022
01-maj-2022
Nadomešča:
SIST EN 851:2014
Aluminij in aluminijeve zlitine - Rondele in polizdelki za izdelavo jedilnih
pripomočkov in posode - Specifikacije
Aluminium and aluminium alloys - Circle and circle stock for the production of culinary
utensils - Specifications
Aluminium und Aluminiumlegierungen - Ronden und Rondenvormaterial zur Herstellung
von Küchengeschirr - Spezifikationen
Aluminium et alliages d'aluminium - Disques et ébauches pour disques pour applications
culinaires - Spécifications
Ta slovenski standard je istoveten z: EN 851:2022
ICS:
77.150.10 Aluminijski izdelki Aluminium products
97.040.60 Kuhinjska posoda, jedilni Cookware, cutlery and
servisi in jedilni pribor flatware
SIST EN 851:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 851:2022

---------------------- Page: 2 ----------------------
SIST EN 851:2022


EN 851
EUROPEAN STANDARD

NORME EUROPÉENNE

March 2022
EUROPÄISCHE NORM
ICS 77.150.10 Supersedes EN 851:2014
English Version

Aluminium and aluminium alloys - Circle and circle stock
for the production of culinary utensils - Specifications
Aluminium et alliages d'aluminium - Disques et Aluminium und Aluminiumlegierungen - Ronden und
ébauches pour disques pour applications culinaires - Rondenvormaterial zur Herstellung von
Spécifications Küchengeschirr - Spezifikationen
This European Standard was approved by CEN on 14 February 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 851:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 851:2022
EN 851:2021 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Technical conditions for inspection and delivery . 5
4.1 General. 5
4.2 Orders or tenders . 5
5 Mechanical properties . 6
5.1 General. 6
5.2 Earing . 6
6 Tolerances on dimensions and form . 6
6.1 General.
...