prEN 1709
(Main)Safety requirements for cableway installations designed to carry persons - Precommissioning inspection, maintenance, operational inspection and checks
Safety requirements for cableway installations designed to carry persons - Precommissioning inspection, maintenance, operational inspection and checks
This document defines the safety requirements applicable to the precommissioning inspection, maintenance and operational inspection and checks of cableway installations designed to carry persons. This document is applicable to the various types of cableway installation and takes into account their environment.
It also includes requirements relating to accident prevention and to the protection of workers.
It does not apply to cableway installations intended for the transport of goods nor to inclined lifts.
This document does not deal with acceptance testing prior to opening to the public.
The provisions of Clause 5 apply to the measures to be taken prior to the initial commissioning of the installation, and those of Clauses 6 and 7 concern the measures to be taken during operation.
Sicherheitsanforderungen an Seilbahnen für den Personenverkehr - Erprobung, Instandhaltung, Betriebskontrollen
Dieses Dokument legt die Sicherheitsanforderungen an die Erprobung, Instandhaltung und Betriebskontrollen von Seilbahnen für den Personenverkehr fest. Dabei werden die verschiedenen Seilbahnsysteme und deren Umgebung berücksichtigt.
Es enthält Anforderungen über die Unfallverhütung und den Arbeitnehmerschutz unbeschadet der Anwendung nationaler Vorschriften mit bau- oder ordnungsrechtlichem Charakter oder die dem Schutz besonderer Personengruppen dienen.
Es gilt weder für die Seilbahnen des Güterverkehrs, noch für die Aufzüge.
Dieses Dokument behandelt nicht die Abnahmeprüfung vor Aufnahme des öffentlichen Betriebes.
Die Festlegungen des Abschnittes 5 beziehen sich auf Maßnahmen vor der erstmaligen Inbetriebnahme der Anlage, jene der Abschnitte 6 und 7 auf Maßnahmen während des Betriebes.
Prescriptions de sécurité pour les installations à câbles transportant des personnes - Examen probatoire, maintenance, contrôles en exploitation
Le présent document établit les prescriptions de sécurité s'appliquant à l'examen probatoire, à la maintenance et aux contrôles en exploitation des installations à câbles transportant des personnes. Il s'applique aux différents systèmes et tient compte de leur environnement.
Il comprend des prescriptions relatives à la prévention des accidents et à la protection des travailleurs.
Il ne s'applique ni aux installations de transport à câbles destinées aux marchandises, ni aux ascenseurs inclinés.
Le présent document ne traite pas des essais de réception avant l'ouverture au public.
Les dispositions de l'article 5 s'appliquent aux mesures à prendre avant la première mise en service de l’installation et les articles 6 et 7 concernent celles à prendre pendant l'exploitation.
Varnostne zahteve za žičniške naprave za prevoz oseb - Prevzemni pregled, vzdrževanje, pregledi in kontrole obratovanja
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 1709:2013
01-junij-2013
9DUQRVWQH]DKWHYH]DåLþQLãNHQDSUDYH]DSUHYR]RVHE3UHY]HPQLSUHJOHG
Y]GUåHYDQMHSUHJOHGLLQNRQWUROHREUDWRYDQMD
Safety requirements for cableway installations designed to carry persons -
Precommissioning inspection, maintenance, operational inspection and checks
Sicherheitsanforderungen für Seilbahnen für den Personenverkehr - Erprobung,
Instandhaltung, Betriebskontrollen
Prescriptions de sécurité pour les installations à câbles transportant des personnes -
Examen probatoire, maintenance, contrôles en exploitation
Ta slovenski standard je istoveten z: prEN 1709
ICS:
45.100 2SUHPD]DåLþQLFH Cableway equipment
oSIST prEN 1709:2013 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
oSIST prEN 1709:2013
oSIST prEN 1709:2013
EUROPEAN STANDARD
DRAFT
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2013
ICS 45.100 Will supersede EN 1709:2004
English Version
Safety requirements for cableway installations designed to carry
persons - Precommissioning inspection, maintenance,
operational inspection and checks
Prescriptions de sécurité pour les installations à câbles Sicherheitsanforderungen für Seilbahnen für den
transportant des personnes - Examen probatoire, Personenverkehr - Erprobung, Instandhaltung,
maintenance, contrôles en exploitation Betriebskontrollen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 242.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 1709:2013: E
worldwide for CEN national Members.
oSIST prEN 1709:2013
Contents Page
1 Scope .6
2 Normative references .6
3 Terms and definitions .7
4 General requirements .8
4.1 Application of this Standard .8
4.2 Safety principles .8
4.2.1 General .8
4.2.2 Hazard scenarios .8
4.2.3 Safety measures .8
5 Precommissioning inspection .9
5.1 General .9
5.2 Verifying the conformity of the installation with the technical documentation and other
documents .9
5.3 Checking the individual components, their interaction with each other and with their local
environment .9
5.4 Operating test . 10
5.5 Submitting the required documentation to the controller . 10
5.6 Report on the precommissioning inspection . 11
6 Maintenance . 11
6.1 General . 11
6.2 Servicing . 12
6.3 Inspection . 12
6.3.1 General . 12
6.3.2 First inspection of the civil engineering works . 12
6.3.3 Monthly inspections . 12
6.3.4 Inspection in the case of intermittent operation . 13
6.3.5 Annual inspections . 13
6.3.6 Multiannual inspections . 15
6.3.7 Special inspections . 15
6.4 Repair . 16
7 Operational inspection and checks . 16
7.1 General . 16
7.2 Daily operational inspection and checks prior to passenger transportation . 17
7.2.1 Operational inspection and checks while the installation is stationary . 17
7.2.2 Operational inspection and checks during the test run . 17
7.3 Operational inspection and checks during operation . 18
7.4 Operational inspection and checks after particular events . 18
Anhang ZA (informative) Relationship between this European Standard and the essential
requirements of the EU Directive 2000/9/EC relating to cableway installations designed to
carry persons . 19
oSIST prEN 1709:2013
Foreword
This document (prEN 1709:2013) has been prepared by the Technical Committee CEN/TC 242 “Safety
requirements for passenger transportation by rope”, the secretariat of which is held by AFNOR.
This document is currently submitted for CEN enquiry.
This document is intended to replace EN 1709:2004.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directives.
For its relationship with EU Directives, see informative Annex ZA, which is an integral part of this document.
The main changes with respect to the previous edition are listed below:
a) 4.2.2, h) has been supplemented with regard to a lack of documentation.
b) The classification of Clause 5 has been changed in order to implement the term “precommissioning
inspection” consistently with 3.1.
c) Clause 5 has been changed in order to clarify the differences between the two categories of documents
(documents using which the planned configuration of the installation is established, and documents which
the supplier has provided to the controller).
d) 5.2 has been deleted, as it is already included in the modified 5.1.
e) The order of the list in 5.3 has been changed to conform with Directive 2000/9/EC and with 6.
f) In the last paragraph of 5.3.3, the independent competent person has been deleted, as this is a matter for
the national members (affects only the safety of workers).
g) In 5.3.3, k) the precommissioning inspection has been deleted because it conflicts with the title and the
performance of recovery exercises as determined in national regulations and/or in EN 1909.
h) The final paragraph of 5.4 has been deleted as it is already covered in EN 12397:2004, 5.1.
i) In 6.1, the requirements for the documentation of maintenance work have been combined and extended
in one place.
j) 6.1.1 (new 6.1.2) has been changed, as, in accordance with 5.5, suppliers are required to provide
instructions for maintenance.
k) The definition of inspection in 6.3.1 has been supplemented by information concerning the time
requirements. This definition is now not the same as the term “inspection” in 10.2 of EN 1907:2004.
l) The requirements in 6.3.1 for civil engineering works are generally applicable and have been expanded to
include all parts of the installation.
m) In 6.3.2 and 6.3.5, the visual inspection of screws and rivets for tightness has been changed to cover
loose and missing elements, and the visual inspection with regard to deformation has been extended to
include all components.
oSIST prEN 1709:2013
n) In 6.3.3, lit a), c), i), k) and parts of lit m) have been omitted on account of technical developments. The
order of the list has been changed to conform with Directive 2000/9/EC.
o) In 6.3.5, the order of the lists has been changed to conform with Directive 2000/9/EC and a Clause
concerning mobile evacuation equipment has been included.
p) 6.3.5.2 has been supplemented with detailed requirements for timber structures and for the terrain in the
vicinity of the civil engineering works.
q) Most of the requirements for funicular railways originally included in 6.3.6 are generally applicable and
have been extended to include all cableway systems. In order to create a comprehensible qualitative
difference with respect to the annual inspections in accordance with 6.3.5.2, the multiannual inspection of
engineering structures (tunnels, galleries, bridges) and ground anchors, the inspection is to be carried out
by competent persons. The changes are to be checked by the “civil engineering works” working group.
r) The intervals and scope of the inspections in 6.3.7 have been changed.
s) The requirements relating to the civil engineering works in 6.4 have been omitted, as they repeat similar
requirements in this Standard.
t) 6.5 has been deleted without replacement.
u) The terms and organisation of Clause 7 have been revised.
v) Clause 8 has been deleted, as it is already covered in other areas of the Standard.
This document forms part of the standards programme adopted by the CEN Technical Board (CEN/BT) in
relation to safety requirements for cableway installations designed to carry persons. This programme
comprises the following Standards:
1) Safety requirements for cableway installations designed to carry persons — Terminology
2) Safety requirements for cableway installations designed to carry persons — General requirements
3) Safety requirements for cableway installations designed to carry persons — Calculations
4) Safety requirements for cableway installations designed to carry persons — Ropes
5) Safety requirements for cableway installations designed to carry persons — Tensioning devices
6) Safety requirements for cableway installations designed to carry persons — Drive systems and other
mechanical equipment
7) Safety requirements for cableway installations designed to carry persons — Carriers
8) Safety requirements for cableway installations designed to carry persons — Electrical equipment other
than for drive systems
9) Safety requirements for cableway installations designed to carry persons — Civil engineering works
10) Safety requirements for cableway installations designed to carry persons — Precommissioning
inspection, maintenance, operational inspection and checks
11) Safety requirements for cableway installations designed to carry persons — Recovery and evacuation
12) Safety requirements for cableway installations designed to carry persons — Operation
13) Safety requirements for cableway installations
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.