EN 13863-2:2003
(Main)Concrete pavements - Part 2: Test method for the determination of the bond between two layers
Concrete pavements - Part 2: Test method for the determination of the bond between two layers
This European Standard specifies a method for the determination of the tensile bond strength between two concrete layers. This method is carried out on cores cut from hardened concrete.
Fahrbahnbefestigungen aus Beton - Teil 2: Prüfverfahren zur Bestimmung des Verbundes zwischen zwei Schichten
Diese Norm legt ein Verfahren zur Bestimmung der Zugfestigkeit des Verbundes zwischen zwei Betonschichten fest. Dieses Verfahren wird an Bohrkernen, die aus erhärtetem Beton entnommen wurden, durchgeführt.
Revêtements en béton - Partie 2: Méthode d'essais pour la détermination du collage entre deux couches
Cette Norme européenne spécifie une méthode pour la détermination de la résistance en traction du collage entre deux couches de béton. Cette méthode est appliquée sur des carottes de béton durci.
Betonska vozišča – 2. del: Preskusna metoda za ugotavljanje spojitve dveh slojev
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Fahrbahnbefestigungen aus Beton - Teil 2: Prüfverfahren zur Bestimmung des Verbundes zwischen zwei SchichtenRevetements en béton - Partie 2: Méthode d'essais pour la détermination du collage entre deux couchesConcrete pavements - Part 2: Test method for the determination of the bond between two layers93.080.20Materiali za gradnjo cestRoad construction materialsICS:Ta slovenski standard je istoveten z:EN 13863-2:2003SIST EN 13863-2:2004en01-junij-2004SIST EN 13863-2:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13863-2October 2003ICS 93.080.20English versionConcrete pavements - Part 2: Test method for the determinationof the bond between two layersRevêtements en béton - Méthodes d'essais - Partie 2:Détermination de la masse volumique d'une carotte à l'étatsaturéFahrbahnbefestigungen aus Beton - Teil 2: Prüfverfahrenzur Bestimmung des Verbundes zwischen zwei SchichtenThis European Standard was approved by CEN on 25 March 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13863-2:2003 ESIST EN 13863-2:2004
Test methods for functional requirements - Part 3: Determination of thethickness of a concrete slab.prEN 13863-4, Concrete pavements —
Test methods - Part 4: Determination of wear resistance to studded tyres.According to the CE
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.