Mountaineering equipment - Ice anchors - Safety requirements and test methods

This European Standard specifies safety requirements and test methods for ice anchors, i.e. ice screws and ice pitons for use in mountaineering including climbing.

Bergsteigerausrüstung - Verankerungsmittel im Eis - Sicherheitstechnische Anforderungen und Prüfverfahren

Diese Europäische Norm legt sicherheitstechnische Anforderungen und Prüfverfahren fest für Verankerungs- mittel im Eis, d. h. Eisschrauben und Eishaken, die beim Bergsteigen, einschließlich Klettern, verwendet werden.

Equipement d'alpinisme et d'escalade - Broches à glace - Exigences de sécurité et méthodes d'essai

Gorniška oprema - Ledni vijaki - Varnostne zahteve in preskusne metode

General Information

Status
Withdrawn
Publication Date
03-Jul-2007
Withdrawal Date
17-Nov-2015
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
18-Nov-2015

Relations

Buy Standard

Standard
EN 568:2008
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 568:2008
01-marec-2008
1DGRPHãþD
SIST EN 568:1998
Gorniška oprema - Ledni vijaki - Varnostne zahteve in preskusne metode
Mountaineering equipment — Ice anchors — Safety requirements and test methods
Bergsteigerausrüstung - Verankerungsmittel im Eis - Sicherheitstechnische
Anforderungen und Prüfverfahren
Equipement d'alpinisme et d'escalade - Broches a glace - Exigences de sécurité et
méthodes d'essai
Ta slovenski standard je istoveten z: EN 568:2007
ICS:
97.220.40
SIST EN 568:2008 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 568
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2007
ICS 97.220.40 Supersedes EN 568:1997
English Version
Mountaineering equipment - Ice anchors - Safety requirements
and test methods
Equipement d'alpinisme et d'escalade - Broches à glace - Bergsteigerausrüstung - Verankerungsmittel im Eis -
Exigences de sécurité et méthodes d'essai Sicherheitstechnische Anforderungen und Prüfverfahren
This European Standard was approved by CEN on 9 June 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 568:2007: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN 568:2007 (E)
Contents Page
Foreword.3
Introduction .4
1 Scope .5
2 Terms and definitions .5
3 Safety requirements .5
3.1 Design .5
3.2 Resistance to hammering of ice pitons.6
3.3 Screwability of the ice screws.6
3.4 Resistance to fracture and holding force.6
4 Test methods.7
4.1 Examination of design .7
4.2 Determination of resistance of hammering of ice pitons, screwability of the ice screws
and resistance to fracture and holding force of ice anchors.7
5 Marking .11
6 Information supplied by the manufacturer .11
Annex A (informative) Standards on mountaineering equipment.12
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 89/686/EEC.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.