Mobile waste and recycling containers - Part 2: Containers with 4 wheels with a capacity up to 1 300 l with flat lid(s), for trunnion and/or comb lifting devices - Dimensions and design

This European Standard specifies dimensions and design requirements of mobile waste containers with 4 wheels, with flat lid(s) and capacity up to 1 300 l to be used by trunnion and/or comb lifting device.

Fahrbare Abfall- und Wertstoffbehälter - Teil 2: Behälter mit 4 Rädern und einem Nennvolumen bis 1300 l mit Flachdeckel(n), für Schüttungen mit Zapfenaufnahme und/oder für Kammschüttungen - Maße und Formgebung

Die vorliegende Europäische Norm legt Maße und Anforderungen an die Formgebung von fahrbaren Abfall- und Wertstoffbehälter (im Folgenden kurz Behälter genannt) mit 4 Rädern, mit Flachdeckel(n) und einem Nenn-volumen bis 1 300 l für Schüttungen für Zapfenaufnahme und/oder für Kammschüttungen fest.

Conteneurs roulants à ordures ménagères et recyclables - Partie 2: Conteneurs à 4 roues de capacité inférieure ou égale à 1300 l à couvercle(s) plat(s), pour lève-conteneurs par tourillon et/ou à peigne - Dimensions et conception

La présente Norme européenne spécifie les dimensions et les exigences de conception pour les conteneurs roulants à ordures ménagères à quatre roues à couvercle(s) plat(s) dont la capacité est inférieure ou égale à 1 300 l, pour lève-conteneurs à tourillon et/ou à peigne.

Premični zabojniki za odpadke in za recikliranje - 2. del: Zabojniki na štirih kolesih s prostornino do 1300 l in ravnim(-i) pokrovom(-i) za iztresalnike z rokama in/ali glavnikom - Mere in oblika

General Information

Status
Withdrawn
Publication Date
11-Dec-2012
Withdrawal Date
07-Apr-2020
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
08-Apr-2020

RELATIONS

Buy Standard

Standard
EN 840-2:2014
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 840-2:2014
01-marec-2014
1DGRPHãþD
SIST EN 840-2:2004

3UHPLþQL]DERMQLNL]DRGSDGNHLQ]DUHFLNOLUDQMHGHO=DERMQLNLQDãWLULKNROHVLK

VSURVWRUQLQRGROLQUDYQLP L SRNURYRP L ]DL]WUHVDOQLNH]URNDPDLQDOL

JODYQLNRP0HUHLQREOLND

Mobile waste and recycling containers - Part 2: Containers with 4 wheels with a capacity

up to 1 300 l with flat lid(s), for trunnion and/or comb lifting devices - Dimensions and

design
Fahrbare Abfall- und Wertstoffbehälter - Teil 2: Behälter mit 4 Rädern und einem
Nennvolumen bis 1300 l mit Flachdeckel(n), für Schüttungen mit Zapfenaufnahme
und/oder für Kammschüttungen - Maße und Formgebung

Conteneurs roulants à ordures ménagères et recyclables - Partie 2: Conteneurs à 4

roues de capacité inférieure ou égale à 1300 l à couvercle(s) plat(s), pour lève-

conteneurs par tourillon et/ou à peigne - Dimensions et conception
Ta slovenski standard je istoveten z: EN 840-2:2012
ICS:
13.030.40 Naprave in oprema za Installations and equipment
odstranjevanje in obdelavo for waste disposal and
odpadkov treatment
SIST EN 840-2:2014 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 840-2:2014
---------------------- Page: 2 ----------------------
SIST EN 840-2:2014
EUROPEAN STANDARD
EN 840-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2012
ICS 13.030.40 Supersedes EN 840-2:2004
English Version
Mobile waste and recycling containers - Part 2: Containers with
4 wheels with a capacity up to 1 300 l with flat lid(s), for trunnion
and/or comb lifting devices - Dimensions and design

Conteneurs roulants à ordures ménagères et recyclables - Fahrbare Abfall- und Wertstoffbehälter - Teil 2: Behälter mit

Partie 3: Conteneurs à 4 roues de capacité inférieure ou 4 Rädern und einem Nennvolumen bis 1300 l mit

égale à 1300 l à couvercle(s) bombé(s), pour lève- Flachdeckel(n), für Schüttungen mit Zapfenaufnahme

conteneurs par tourillon et/ou à peigne - Dimensions et und/oder für Kammschüttungen - Maße und Formgebung

conception
This European Standard was approved by CEN on 22 September 2012.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European

Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national

standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same

status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United

Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels

© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 840-2:2012: E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 840-2:2014
EN 840-2:2012 (E)
Contents Page

Foreword ..............................................................................................................................................................3

1 Scope ......................................................................................................................................................4

2 Normative references ............................................................................................................................4

3 Terms and definitions ...........................................................................................................................4

4 Volumes ..................................................................................................................................................5

5 Dimensions and design ........................................................................................................................5

6 Nominal mass .........................................................................................................................................6

7 Safety and health requirements ...........................................................................................................6

8 Testing ....................................................................................................................................................6

9 Marking ...................................................................................................................................................6

10 Designation ............................................................................................................................................7

Annex A (informative) Recommendations for manufacturers of lifting devices ....................................... 15

Annex B (informative) A-Deviations ............................................................................................................... 17

Bibliography ..................................................................................................................................................... 18

---------------------- Page: 4 ----------------------
SIST EN 840-2:2014
EN 840-2:2012 (E)
Foreword

This document (EN 840-2:2012) has been prepared by Technical Committee CEN/TC 183 “Waste

management”, the secretariat of which is held by DIN.

This European Standard shall be given the status of a national standard, either by publication of an identical

text or by endorsement, at the latest by June 2013, and conflicting national standards shall be withdrawn at

the latest by June 2013.

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent

rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.

This document supersedes EN 840-2:2004.
Technical changes since the latest edition:

 The content was adapted to the current state of the art and revised editorially.

 Figure 3 has been deleted.

 Frontal receivers Form B and C have been deleted. Figure 2 has been changed accordingly.

This European Standard is one part of the series of standards of EN 840 with the main title Mobile waste and

recycling containers comprising the following parts:

 Part 1: Containers with 2 wheels with a capacity up to 400 l for comb lifting devices  Dimensions and

design;

 Part 2: Containers with 4 wheels with a capacity up to 1 300 l with flat lid(s), for trunnion and/or comb

lifting devices  Dimensions and design (the present document);

 Part 3: Containers with 4 wheels with a capacity up to 1 300 l with dome lid(s), for trunnion and/or comb

lifting devices  Dimensions and design;

 Part 4: Containers with 4 wheels with a capacity up to 1 700 l with flat lid(s), for wide trunnion or BG-

and/or wide comb lifting devices  Dimensions and design;
 Part 5: Performance requirements and test methods;
 Part 6: Safety and health requirements.

According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following

countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech

Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,

Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,

Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

---------------------- Page: 5 ----------------------
SIST EN 840-2:2014
EN 840-2:2012 (E)
1 Scope

This European Standard specifies dimensions and design requirements of mobile waste containers with

4 wheels, with flat lid(s) and capacity up to 1 300 l to be used by trunnion and/or comb lifting device.

2 Normative references

The following documents, in whole or in part, are normatively referenced in this document and are

indispensable for its application. For dated references, only the edition cited applies. For undated references,

the latest edition of the referenced document (including any amendments) applies.

EN 840-5, Mobile waste and recycling containers — Part 5: Performance requirements and test methods

EN 840-6:2012, Mobile waste and recycling containers — Part 6: Safety and health requirements

EN 1501-1, Refuse collection vehicles — General requirements and safety requirements — Part 1: Rear

loaded refuse collection vehicles

EN 1501-5:2011, Refuse collection vehicles — General requirements and safety requirements — Part 5:

Lifting devices for refuse collection vehicles

EN ISO 11469, Plastics — Generic identification and marking of plastics products (ISO 11469)

3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.

NOTE Terms for components of mobile waste containers and lifting devices in three languages are given in Annex A

of EN 840-1:2012.
3.1
mobile waste and recycling container

appropriately designed container fitted with wheels intended to temporarily store waste

3.2
lifting device
structure which picks-up, tilts and empties containers
3.3
comb lifting device

lifting device in which the picking-up system consists of a row of teeth and a locking system to retain the

container during emptying
3.4
trunnion lifting device

lifting device in which the picking-up system consists of a pair of arms with automatic locking mechanism to fit

the trunnion to retain the container during emptying
3.5
volume
total space inside the container when the lid is closed
Note 1 to entry: See Table 1.
---------------------- Page: 6 ----------------------
SIST EN 840-2:2014
EN 840-2:2012 (E)
3.6
nominal volume
capacity
volume stated by the manufacturer
Note 1 to entry: See Table 1 without tolerances.

Note 2 to entry: The English term "capacity" and the French term "capacité" are translated in the German version by

the term "Nennvolumen".
3.7
nominal mass
mass, which is calculated as given in Clause 6
3.8
total permissible mass
mass of the container plus the nominal mass
3.9
functional and safety dimensions

essential dimensions which ensure the functionality and interchangeability of the container with the compatible

lifting device and which are necessary for the operator's safety and health
4 Volumes
This part of EN 840 identifies the two classes of containers:
 Class I - small size (nominal volume up to 1 000 l);
 Class II - large size (nominal volume between 1 000 l and 1 300 l).

Within the two above-mentioned classes of containers the following volumes are identified: 500 l, 660 l, 770 l,

1 000 l, 1 100 l and 1 200 l. Nominal volumes different from those referenced can be used by agreement

between user and manufacturer. The tolerance of the volumes shall be ± 5 % maximum measured according

to EN 840-5.
5 Dimensions and design

5.1 The design of the containers need not correspond to the drawings given in Figure 1. The functional

dimensions given in Table 1 shall be respected. Recommendations for manufacturers of lifting devices are

given in Annex A (see also EN 1501-1).

5.2 The container shall be constructed so that when it is unloaded or loaded with a nominal load

(see Clause 6), it fits on an approved compatible lifting device. It shall be automatically locked safely into the

lifting device during the lifting operation. If the container is equipped with a comb receiver, it shall correspond

to Figure 2.

5.3 The lid(s) shall cover the opening of the container completely. It shall be opened easily by itself during

the emptying cycle it/they shall be made with at least two fixing points and have at least one means of

opening.

5.4 Handles fitted in front of the trunnion shall have a measurement over the handles of 10 mm less than

the actual measurement in Table 1, dimension N° 33. The h
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.